PREV 26th Dec, 2018 NEXT

New RF & Microwave Products this Week

26 Dec, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 26 Dec, 2018
 
Happy Holidays from everything RF!
 
 
 
New RF & Microwave Products this Week
Band Pass Filter
Ultra-Thin Bandpass Filters from 300 MHz to 6 GHz

Band Pass Filter from Lark Engineering

The XXUTMS Series of Ultra-Thin filters from Lark Engineering operate from 300 MHz to 6 GHz. They can be customized to have a passband of up to 60% of the frequency range and can be used for both military and commercial applications. The filters provide a low insertion loss, have a high rejection level of 60 dB while maintaining a VSWR of better than 1.5:1.
 
Download Datasheet | Product Details
 
RF Amplifier
3.4 to 3.8 GHz Power Amplifier for Wireless Infrastructure Applications

RF Amplifier from Skyworks Solutions

The SKY66293-21 from Skyworks is a high-efficiency power amplifier that operates from 3.4 to 3.8 GHz. It provides an output power of 4 watts and a gain of 35 dB with a PAE of 29%. The PA operates from a single supply voltage of 5 V. It is available in a compact 5 x 5 x 1.3 mm package and is ideal for active antenna arrays, massive MIMO, CBRS, FDD and TDD 2G/3G/4G LTE systems.
 
Download Datasheet | Product Details
 
Front End Module
28 GHz GaN Front End Module for Fixed Wireless 5G Base Stations

Front End Module from Qorvo

The QPF4001 is a GaN front-end module (FEM) for 28 GHz phased array 5G base stations and terminals. It integrates a high linearity LNA, a low loss transmit/receive switch and a high-gain, high-efficiency multi-stage PA in a single MMIC. The FEM operates from 26 GHz to 30 GHz.
 
Download Datasheet | Product Details
 
RF Amplifier
Ultra Low Phase Noise Amplifier from 2 to 18 GHz

RF Amplifier from MACOM

The MAAL-011151 from MACOM is a low phase noise distributed amplifier that operates from 2 to 18 GHz. The amplifier provides 17 dB of linear gain, 16 dBm of P1dB and 4 dB of noise figure at 8 GHz. This device is ideally suited for Test and Measurement, EW, ECM, and Radar applications where ultra low phase noise and drive power is required.
 
Download Datasheet | Product Details
 
RF Amplifier
2.025 to 2.4 GHz LNAs for Earth Station Receiver Applications

RF Amplifier from Advantech Wireless

The ALNA-S Series of Low Noise Amplifiers operate from 2.025 to 2.400 GHz in the S-band. These low noise, high dynamic range amplifiers are suitable for use in satellite earth station receiver applications where ultra-low noise and high reliability are critical. The LNAs provide a gain of over 50 dB with an output power of more than 10 dBm and Noise Temperature ranging from 50 K to 70 K.
 
Download Datasheet | Product Details
 
RF Amplifier
2000 W Solid State Power Amplifier from 0.4 to 1 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2123 from Exodus Advanced Communications is a solid state power amplifier that operates from 400 to 1000 MHz. It provides up to 2,000 Watts of CW power with a gain of 63 dB. The amplifier is available in a rack mount cabinet with local/remote monitoring & control circuitry interfaces. It has built-in protection circuits and has been developed for high reliability and rugged use.
 
Download Datasheet | Product Details
 
RF Test Set
Base Station Analyzer from 9 kHz to 8 GHz

RF Test Set from Viavi Solutions

The VIAVI CellAdvisor JD786B Base Station Analyzer combines the functionality of a spectrum analyzer, cable and antenna analyzer, and power meter into a single device. The spectrum analyzer operates up to 8 GHz, cable and antenna analyzer up to 6 GHz and the power meter up to 8 GHz.
 
Download Datasheet | Product Details
 
Signal Generator
Multi-Channel Signal Generator from 9 kHz to 3 GHz

Signal Generator from IZT

The IZT S1010 from IZT is an advanced Digital Signal Generator that operates from 9 kHz to 3 GHz with an instantaneous bandwidth of up to 120 MHz. It has 31 virtual signal generators in one device. This compact multi-channel platform can simultaneously simulate a test environment with multiple sources and can stream multiple signals in parallel with a cumulative bandwidth of up to 320 MS/s.
 
Download Datasheet | Product Details
 
Sponsored by PCB Directory
 
 
 
RF Amplifier
125 W CW Microwave Power Module from 26.5 to 40 GHz

RF Amplifier from dB Control

The dB-3201 from dB Control is a microwave power module (MPM) that operates from 26.5 to 40 GHz and provides 125 watts of pulsed/CW output power. The RF signal path consists of a solid state amplifier and a vacuum power booster. The conduction-cooled MPM requires a 270 VDC supply and is designed to operate in extreme military environments.
 
Download Datasheet | Product Details
 
PLDRO
Phase Locked DRO from 1 to 40 GHz

PLDRO from Microwave Dynamics

The PLO-5000 Series is a family of Phase Locked DRO's (Dielectric Resonator Oscillator) that can operate at a single frequency from 1 to 40 GHz. The PLO-5000 series is internally referenced locked and factory tuned to a specified frequency, however has a mechanical tuning range of 100 MHz. These PLDROs provide an output power of up to 25 dBm while operating over a supply of 12 V or 15 V @200 mA.
 
Download Datasheet | Product Details
 
Power Divider
16-Way Stripline Power Divider from 2 to 18 GHz

Power Divider from Werbel Microwave

The WMPD16-2-18-S from Werbel Microwave is a 16-way stripline power divider that operates from 2 to 18 GHz. The divider has an insertion loss of less than 3.3 dB and an isolation of over 15 dB. It can handle up to 20 watts of power as a splitter and has a good VSWR. The WMPD16-2-18-S is available in a module with SMA female connectors.
 
Download Datasheet | Product Details
 
Triplexer
Triplexer for Combining PCS, AWS1-3, and BRS Bands

Triplexer from Microlab

The BK-3001E from Microlab is a triplexer which allows combination and separation of the signals in 1850-2000 MHz (PCS), 1695-1780/2110-2200 MHz (AWS1-3) and 2496-2690 MHz (BRS) frequency bands. It has low-PIM of less than -161 dBc and input isolation of more than 40 dB between the bands. The triplexer can handle input powers up to 100 W per input port. It is available in a module that measures 226.7 x 178.5 x 49 mm with 4.3-10 female connectors.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Ultra Flexible and Rugged Test Cable from DC to 32 GHz

RF Cable Assembly from MegaPhase

The Killer Bee from MegaPhase is an ultra flexible and rugged test cable that can be used from DC to 32 GHz. This light-weight test cable provides a long service life with superior phase and amplitude stability performance through the life of the cable. It is ideal for lab, production and thermal testing applications over a temperature range from -50 to 150 Celsius. A wide variety of connectors are available for use with this cable.
 
Download Datasheet | Product Details
 
RF Cable Assembly
SMP Female R/A Cable Assembly Operates up to 40 GHz

RF Cable Assembly from SV Microwave

The 7012-0799 from SV Microwave is a SMP Female R/A to SMP Female R/A Cable Assembly with a .085 Cable, operating up to 40 GHz. It has an insertion loss of 0.06 dB and shielding effectiveness of -65 dB from 3 to 26.5 GHz. This cable assembly is designed to accommodate both radial and axial misalignment. It is ideal for SATCOM, aerospace, military and telecom applications.
 
Download Datasheet | Product Details
 
Cellular Module
CAT-M1 IoT Chipset with CAT-1 Fallback

Cellular Module from Altair Semiconductor

The ALT1210 from Altair Semi is a CAT-M1 IoT Chipset with CAT-1 Fallback. This IoT module features downlink speeds up to 1 Mbps, with extremely low power consumption, and is software upgradeable to single antenna LTE CAT-1. ALT1210 is highly integrated with an on-chip PMU, DDR memory and a low-power application layer with a robust security framework for customer-developed applications, enabling designs with just a few external components.
 
Download Datasheet | Product Details
 
RF Module
Certified Bluetooth 5.0 Module with Integrated Antenna

RF Module from Sierra Wireless

The BC127 from Sierra Wireless is a Certified Bluetooth 5 module with an integrated antenna. This 2.4 GHz module provides a transmit power of 10 dBm and a data rate of up to 3 Mbps (typical 1.6 Mbps). It has an RF sensitivity of -88 dBm and an operating range of up to 30 m. The module is available in a 11.8 x 18 x 3.2 mm package and has an embedded Bluetooth Stack with simple UART interface.
 
Download Datasheet | Product Details
 
Waveguide Combiner / Divider
4 Way Waveguide Power Divider from 26.5 to 35 GHz

Waveguide Combiner / Divider from SAGE Millimeter

The SWP-27335304-28-E1 from SAGE Millimeter is a 4-Way Waveguide Power Divider that operates from 26.5 to 35 GHz. This Ka-Band in-line waveguide power divider has a typical insertion loss of 0.5 dB at each output port and a typical isolation of 25 dB. The ports are well balanced and in phase for either power dividing or power combining applications across the specified frequency range.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We keep users up to date with the latest news stories, products, white papers, articles and upcoming events.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]