PREV 9th Jan, 2019 NEXT

New RF & Microwave Products this Week

9 Jan, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 9 Jan, 2019
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
RF Amplifier
3.4 to 3.6 GHz Hybrid GaN PA Module for 5G Massive MIMO Applications

RF Amplifier from RFHIC

The RPAM35008-25 is a fully integrated micro-strip Doherty GaN hybrid power amplifier module designed for 5G Massive MIMO systems, small cells, and low power remote radio head applications. This 2-stage power amplifier module can deliver up to 50 Watts of saturated power, while operating from 3400 to 3600 MHz. It provides a gain of 25 dB with an efficiency of 41%.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise MMIC Amplifier from 0.5 to 8 GHz

RF Amplifier from Mini Circuits

The CMA-83LN+ from Mini Circuits is a low noise MMIC amplifier that operates from 0.5 to 8 GHz. It delivers a flat gain and a P1dB of 20.3 dBm at 2 GHz with a noise figure of 1.3 dB. The amplifier operates on a single 5V or 6V supply and is well matched to 50 ohms. It is available in a tiny, low profile package that measures 0.12 x 0.12 x 0.045 inches and is ideal for sensitive, high-dynamic-range receiver applications.
 
Download Datasheet | Product Details
 
Tunable Filter
5 W Tunable Filters from 30 to 520 MHz

Tunable Filter from Pole/Zero

The ERF-5W Series from Pole/Zero are Tunable Filters that operate from 30 to 520 MHz with 10% bandwidth. The filters have a low insertion loss, good selectivity and can handle an input power of up to 5 watts (in-band). They can be controlled using an SPI control interface and have a tuning speed of 25 uS. The filters are available in a module and are ideal for military radar, satcom, UAVs and handheld military radios applications.
 
Download Datasheet | Product Details
 
Frequency Multiplier
4x Active Frequency Multiplier from 8.25 to 12.5 GHz

Frequency Multiplier from Spacek Labs

The AQ-4X from Spacek Labs is a 4x MMIC-based, Active Frequency Multiplier that quadruples an input frequency of 8.25 to 12.5 GHz to an output frequency of 33 to 50 GHz. The multiplier can amplify an input signal of 12 dBm to have an output power of 17 dBm with spurious levels of -25 dBc. The AQ-4X requires a supply voltage of 8-12 VDC and draws up to 550 mA of current.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
75 Ohm Solid-State Programmable Attenuator from 5 to 2150 MHz

RF Variable Attenuator from JFW Industries

The 75P-217 from JFW Industries is a 75 Ohm solid-state programmable attenuator that operates from 5 to 2150 MHz. It has an attenuation range of 0 to 95 dB with 1 dB steps. The attenuator has seven individually controlled attenuation steps of 1 dB, 2 dB, 4 dB, 8 dB, 16 dB and 32 dB. It is rated for 27 dBm of RF input power. The unit is controlled via 7 TTL control lines and each of the attenuation steps has a corresponding TTL control line.
 
Download Datasheet | Product Details
 
RF Transistor
890 W GaN on SiC HEMT from 960 to 1215 MHz

RF Transistor from Wolfspeed, A Cree Company

The GTVA107001EC-V1 from Wolfspeed is a GaN on SiC HEMT that operates from 960 to 1215 MHz. It provides a peak output power of 890 W (P3dB) and a gain of 18 dB while operating from 50 V supply. This Pulsed/CW device has a pulse width 128 µs and duty cycle of 10%. It is available in a thermally-enhanced surface mount package with bolt-down flange and is ideal for avionics applications.
 
Download Datasheet | Product Details
 
RF Amplifier
C-Band Bi-Directional Amplifier with Manual Transmit/Receive Control

RF Amplifier from NuWaves Engineering

The NW-BA-C-10-RX01 from NuWaves is a C-Band Solid State Bi-directional Amplifier module that operates from 4.4 to 5.1 GHz. It provides a gain of 10 dB with a RF power of 10 watts while operating with 20% power efficiency. The BDA has a manual transmit/receive (T/R) control, with an extremely fast T/R mode switch time of under 2 uS.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
SMA to MMCX Cable Assemblies
Brass & Gold-Plated SMA to MMCX Cable Assemblies
Amphenol RF SMA to MMCX Cable Assemblies are available in 3, 6, 9, 12, 18, 24, and 36-inch lengths and RG-174, RG-178, and RG-316 cable types. Click here to learn more.
 
 
 
RF Amplifier
80 W Solid State Power Amplifier System from 40 to 47 GHz

RF Amplifier from Exodus Advanced Communications

The AMP4076-LC is a solid state GaAs power amplifier from Exodus Advanced Communications that operates from 40 to 47 GHz. It provides an output power of 80 watts with a gain of over 48 dB. The amplifier has a wide instantaneous bandwidth and is suitable for all single channel modulation standards.
 
Download Datasheet | Product Details
 
RF Module
Certified Bluetooth 5.0 Module with an Integrated Antenna

RF Module from Sierra Wireless

The BC127 from Sierra Wireless is a Certified Bluetooth 5 module with an integrated antenna. This 2.4 GHz module provides a transmit power of 10 dBm and a data rate of up to 3 Mbps (typical 1.6 Mbps). It has an RF sensitivity of -88 dBm and an operating range of up to 30 m. The module is available in an 11.8 x 18 x 3.2 mm package and has an embedded Bluetooth Stack with simple UART interface.
 
Download Datasheet | Product Details
 
Wireless SoC
WiGig / WiFi 802.11ad SoC for the 60 GHz Band

Wireless SoC from Qualcomm

The QCA9500 from Qualcomm is a multi-gigabit 802.11ad solution for mobile devices and access points (routers). Operating in the 60 GHz millimeter wave band, it provides up to 4.6 Gbps peak speed and very low latency. The chipset complies with IEEE 802.11ad specifications and WiGig requirements. It is available in a package that measures 5.17 x 3.23 x 0.344 mm.
 
Download Datasheet | Product Details
 
Cellular Module
LTE-A Cat 20 Module for M2M and IoT Applications

Cellular Module from Quectel

The EM20 from Quectel is an LTE Advanced Category 20 module that provides a maximum LTE throughput of 2.0 Gbps for Downlink and 150 Mbps uplink peak data rates. It is based on Qualcomm’s SDX24 chipset and is fully compliant with 3GPP R13 specification.
 
Download Datasheet | Product Details
 
Antenna
L2 Band GNSS Antenna with Centimetre Level Accuracy

Antenna from Antenova

The SR4G053 from Antenova is an SMD antenna capable of achieving extraordinary accuracy for GNSS applications (L1, L2, L5 GPS bands). The Raptor antenna is capable of precise positioning (in centimeters) by utilizing the L2, 1200 MHz satellite bands which recently became available for civilian use.
 
Download Datasheet | Product Details
 
Antenna
GPS L1/L2/L5, GLONASS, Galileo and BeiDou Single Feed Patch Antenna

Antenna from Taoglas

The GGBSFTP.45.9.A.08 is an embedded stacked passive patch antenna for GPS L1, GPS L2 and GPS L5 bands that also supports GLONASS, Galileo and BeiDou. It delivers a gain of up to 2.5 dBi with an efficiency of up to 63%. This right-hand circular polarized antenna measures 45 x 45 x 9 mm and is ideal for Drones, Defense and Automotive applications.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
10 MHz to 1.5 GHz Voltage-Controlled Variable Attenuator

RF Variable Attenuator from Skyworks Solutions

The SKY12239-11 from Skyworks is a voltage-controlled variable attenuator (VVA) that operates from 10 MHz to 1.5 GHz. This VVA has an attenuation range of 33 dB and a control voltage range from 1 - 5 V. It has low insertion loss for improved transceiver efficiency, high IP3 of +50 dBm and ultra-low distortion for low noise transceiver applications.
 
Download Datasheet | Product Details
 
Sponsored by Mouser
 
 
 
Wireless Charging Receiver
15 W PMA/Qi Complaint Wireless Power Receiver IC

Wireless Charging Receiver from ROHM Semiconductor

The BD57015GWL from ROHM Semiconductor is a 15 W PMA/Qi complaint stand-alone wireless power receiver IC. It supports Qi standard ver 1.2 and PMA standard SR1. The device integrates a fully synchronous rectifier circuit with low-impedance FETs, Qi-compliant and PMA compliant packet controller, has an adjustable regulated voltage output, and an open-drain output terminal to communicate with the power transmitter using amplitude modulation.
 
Download Datasheet | Product Details
 
RF Transistor
1200 W LDMOS Power Transistor for Avionics Applications

RF Transistor from Ampleon

The BLA9H0912L-1200P from Ampleon is an LDMOS RF power transistor that operates from 960 to 1215 MHz. It delivers 1200 Watts (CW) of power while operating from a 50 V power source. The transistor has integrated dual sided ESD protection, excellent thermal stability and provides an efficiency of more than 60%. It is available in a SOT539A package and is ideal for avionics applications.
 
Download Datasheet | Product Details
 
RF Amplifier
50 W Solid State Power Amplifier from 6 to 18 GHz

RF Amplifier from Ophir RF

The 4136 from Ophir RF is a Power Amplifier System that operates from 6 to 18 GHz. The amplifier delivers a saturated output power of 50 W with a gain of over 48 dB. This Class A linear amplifier has harmonics of -20 dBc and spurious of -60 dBc at 15 watts (P1dB). It requires 90 to 240 V(AC) supply and consumes up to 1200 W of power.
 
Download Datasheet | Product Details
 
Signal Generator
Multi-Channel Signal Generator from 9 kHz to 3 GHz

Signal Generator from IZT

The IZT S1000 from IZT is an advanced Digital Signal Generator that operates from 9 kHz to 3 GHz with an instantaneous bandwidth of up to 120 MHz. It has 31 virtual signal generators in one device. This compact multi-channel platform can simultaneously simulate a test environment with multiple sources and can stream multiple signals in parallel with a cumulative bandwidth of up to 320 MS/s.
 
Download Datasheet | Product Details
 
Termination
2 W N-Type Male Termination from DC to 6 GHz

Termination from Hytem

The 02.02.92 from Hytem is a Termination that operates from DC to 6 GHz. This N-type male termination can handle up to 2 watts of power and has a VSWR of less than 1.30:1. The termination measures 30 mm in length and can operate from -55 to 125 degrees C.
 
Download Datasheet | Product Details
 
RF Mixer
4 to 10 GHz Mixer with Integrated Synthesizer

RF Mixer from Texas Instruments

The LMX8410L is a high-performance mixer with an integrated LO and IF amplifier that accepts an input RF frequency from 4 to 10 GHz and downconverts it to DC to 1350 MHz. It provides an excellent dynamic range for high-performance applications with an IIP3 of 28 dBm and NF of 15 dB (both at 5 GHz).
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, interviews, technical articles, white papers and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]