PREV 20th Feb, 2019 NEXT

New RF & Microwave Products this Week

20 Feb, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 20 Feb, 2019
 
Sponsored by Digi-Key
 
 
 
New RF and Microwave Products this Week
RF Transistor
29 W RF GaN on SiC HEMT from 3.3 to 3.6 GHz

RF Transistor from Wolfspeed, A Cree Company

The GTRA362002FC-V1 from Wolfspeed is a GaN on SiC HEMT that operates from 3.3 to 3.6 GHz. It provides an average power of 29 W with a gain of 13.5 dB and an efficiency of 42% while operating from 48 V supply. This device is available in a thermally-enhanced surface mount package with earless flange and is ideal for multi-standard cellular power amplifier applications.
 
Download Datasheet | Product Details
 
RF Transistor
High Power Broadband GaN Transistor from 0.1 to 6 GHz

RF Transistor from Integra Technologies, Inc.

The IGN0160UM12 from Integra Technologies is a GaN on SiC RF Transistor that operates from 0.1 to 6 GHz. The amplifier has been specified for use under class AB operation and provides an output power of more than 12 watts with a power gain of 17 dB. The amplifier requires a 50 V power supply. It is available in a metal based package sealed with Ceramic-Epoxy Lid and is ideal for Broadband applications.
 
Download Datasheet | Product Details
 
RF Module
Low Power RF Module for the 900 MHz ISM Band

RF Module from Anaren Inc

The A1101R09C from Anaren is a high-performance RF module for the 900 MHz ISM band. This FCC & IC certified module is based on the Texas Instruments CC1101 transceiver chip and is compatible with all TI-approved software stacks. It has a programmable output power up to +10 dBm and high sensitivity of -112 dBm.
 
Download Datasheet | Product Details
 
RF Module
LoRaWAN and Bluetooth 5.0 Combo Module

RF Module from Insight SiP

The ISP4520 is a Smart LoRa and Bluetooth Low Energy Combo Module from Insight SIP that has integrated Nordic's nRF52832 BLE chip and Semtech's SX1261 LoRa transceiver. Processing power is provided by the Nordic nRF52’s onboard M4 floating point processor, with 512K of flash memory available for advanced applications.
 
Download Datasheet | Product Details
 
RF Amplifier
12 W GaN High Power Amplifier from 2.6 to 3.4 GHz

RF Amplifier from United Monolithic Semiconductors

The CHZ8012-QJA from UMS is an S-Band Quasi-MMIC GaN Power Amplifier that operates from 2.6 to 3.4 GHz. The amplifier provides 12 watts of power with 16.5 dB of signal gain and a power added efficiency of 55%. It requires a 30 V supply and has been designed for a wide range of applications, from military to commercial radar systems.
 
Download Datasheet | Product Details
 
RF Amplifier
Solid State High Power Amplifier from 26.5 to 40 GHz

RF Amplifier from Exodus Advanced Communications

The AMP3132A from Exodus Advanced Communications is a solid state high power amplifier that operates from 26.5 to 40 GHz. It delivers an output power of more than 15 watts with a gain of over 52 dB and has a noise figure of less than 12 dB. This Class AB linear GaAs amplifier requires a supply voltage of 8 VDC and consumes 32 A of current.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
RF Cable Assemblies
Extreme RF Cable Assemblies with the Reliability and Performance for Every Application
SV's offers a complete line of high frequency cable assemblies utilizing 2.92mm (SVK)/2.4mm and SMP/SMPM/SMPS connectors on 0.047 and 0.085 cables. SV’s cable assemblies feature low solder wicking and our high flexibility allows for tight bends behind the cable ferrule. Our low loss is your gain! Click here to learn more.
 
 
 
Power Divider
30 W, 2-Way Power Divider from 26 to 34 GHz

Power Divider from MECA

The 802-3-30.000 from MECA is a 2-way power divider that operates from 26 to 34 GHz. It can handle up to 30 watts of power, has an insertion loss of under 1.70 dB and isolation over 14.5 dB. The power divider is available in a module with 2.92 mm female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
10 W Bi-directional Amplifier from 1 to 2.5 GHz

RF Amplifier from NuWaves Engineering

The NW-BA-12B04A from NuWaves Engineering is a bi-directional amplifier that operates from 1 to 2.5 GHz. This L-Band/S-Band amplifier generates 10 W of output power at the Tx port (5% EVM at 34 dBm). It is ideal for extending the communication range of half duplex L or S-band transceivers with constant-envelope waveforms or near-constant-envelope waveforms.
 
Download Datasheet | Product Details
 
Band Pass Filter
1025 to 1150 MHz Tunable Bandpass Cavity Filter

Band Pass Filter from MtronPTI

The UF9978 from Mtron PTI is a tunable bandpass cavity filter that operates from 1025 to 1150 MHz with a 3 dB bandwidth of up to 4 MHz. The filter has a low insertion loss of under 2 dB, stop-band attenuation of over 80 dB and can handle an input power of up to 50 watts. It can be controlled using screw tuning mechanism.
 
Download Datasheet | Product Details
 
Tunable Filter
Tunable Bandpass Filter from 0.8 to 1.2 GHz

Tunable Filter from Netcom

The Model 5677 from Netcom is a tunable filter that operates from 0.8 to 1.2 GHz with a 9% bandwidth. The filter has a low insertion loss of 4.5 dB and can handle an input power of up to 33 dBm. It can be controlled using a serial input control interface and has a tuning speed of less than 35 us. The filter is available in a surface mount package that measures 0.575 x 0.575 x 0.280 inches.
 
Download Datasheet | Product Details
 
RF Amplifier
3400 to 3600 MHz High-Efficiency Power Amplifier for 4G/5G Applications

RF Amplifier from Skyworks Solutions

The SKY66313-11 is a high-efficiency power amplifier that operates from 3400 to 3600 MHz. This high gain, high linearity PA provides an output power of 33 dBm with a gain of 36 dB and PAE of 15%. It requires a single 5 V supply and has integrated active biasing circuitry to compensate for PA performance over temperature, voltage and process variation.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Amplifier from 0.7 to 0.96 GHz

RF Amplifier from Guerrilla RF

The GRF2806 is a low noise amplifier that operates from 0.7 to 0.96 GHz. At 0.9 GHz, it provides a gain of 20 dB with a noise figure of 1.2 dB and a P1dB of 13.5 dBm while operating from a 3.3 Volt supply and consuming 15 mA of current. It is available in a 4 x 4 mm surface mount package and is ideal for small cell, cellular repeaters, WLAN and distributed antenna system applications.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
Connectors for Every Application
Extreme RF Solderless PCB Edge Launch Connectors for Every Application
SV's high speed RF/coaxial solderless edge launch connectors are ideal for extreme frequency PCB applications where precision is key. These rugged, durable and reusable connectors are adjustable to accommodate multiple PCB thicknesses and do not damage the PCB. Click here to learn more.
 
 
 
Termination
Low-PIM 50 W Terminations from DC to 3 GHz

Termination from Innowave RF

The 301L-50 Series from Innowave RF are Low PIM Terminations that operate from DC to 3 GHz. These terminations are matched to 50 ohms and can handle an average power up to 50 watts and peak power up to 1 KW. The terminations have PIM values as low as -165 dBc. They are available with DIN, Mini-DIN, 4.3-10 or Type-N connector interfaces.
 
Download Datasheet | Product Details
 
RFID Tag
UHF RFID Tag for Metal Surfaces with a 2 Meter Range

RFID Tag from Abracon LLC

The ART915X050503OP-IC from Abracon is an ISO 18000-6C/EPC Class1 Gen2 compliant RFID Transponder that operates from 902 to 928 MHz. It utilizes the Alien H3 RFID chipset and has a read range of up to 2 m. The tag is available in a package that measures 5 x 5 x 3 mm and is compatible with any material, including metal. It is ideal for local asset tracking, medical equipment, military devices and data center applications.
 
Download Datasheet | Product Details
 
Antenna
GPS + LTE External Antenna for Wireless Applications

Antenna from Raltron

The RDM-PB0-MA3E7-5048-1M-X-001 from Raltron Electronics is a compact GPS + LTE external antenna that covers frequencies bands from 698-960 MHz and 1710-2690 MHz for LTE and 1575.420-1602 MHz for GPS/ GLONASS applications. The antenna has a gain of 28 dB (active gain) for the GNSS band and a gain of 2 dBi for the LTE band.
 
Product Details
 
Frequency Synthesizer
Programmable Frequency Synthesizer from 50 MHz to 8 GHz

Frequency Synthesizer from EM Research

The LT Series from EM Research are programmable frequency synthesizers that operate from 50 MHz to 8 GHz. The synthesizers provide an output power of up to 10 dBm and require an external reference from 5 to 100 MHz. The synthesized signal has a low phase noise with harmonics less than -20 dBc and spurious less than -60 dBc. The synthesizers require a supply voltage of 3.3, 5 Vdc and draw a current of below 150 mA.
 
Download Datasheet | Product Details
 
RF Transceiver
37/39 GHz Silicon 5G Rx Quad Core IC

RF Transceiver from Anokiwave

The AWMF-0145 is a highly integrated silicon quad-core Tx IC intended for 5G phased array applications. It supports four radiating elements, includes 5-bit phase control and 5-bit gain control for analog RF beam steering. The IC has a 4.5 dB noise figure and includes gain compensation over temperature, temperature reporting, Tx power telemetry, and fast beam switching using on-chip beam weight storage registers.
 
Download Datasheet | Product Details
 
Dual Directional Coupler
250 W Dual Directional Coupler from 0.7 to 6 GHz

Dual Directional Coupler from Innovative Power Products

The IPP-3216 from Innovative Power Products is a dual directional coupler that operates from 0.7 to 6 GHz. It has a coupling value of 40 dB, an insertion loss of less than 0.4 dB, directivity of over 17 dB and a VSWR of 1.30:1. The coupler can handle up to 250 W of average power and is available in a module that measures 1.5 x 1.5 inches with SMA/N-type female connectors.
 
Download Datasheet | Product Details
 
High Pass Filter
1.6 GHz High Pass Filter

High Pass Filter from Crystek Corporation

The CHPFL-1600 from Crystek is a high pass filter with a cutoff frequency of 1.6 GHz. This filter has excellent out-of-band rejection and can handle an input power of up to 4 watts. It is available in a module with SMA connectors and is ideal for Test Equipment and General Lab Use.
 
Download Datasheet | Product Details
 
RF Module
Dual-Band 802.11ax Wi-Fi/Bluetooth 5.0 Combo Chip

RF Module from Broadcom

The BCM4375 from Broadcom is a dual-band 802.11ax Wi-Fi/Bluetooth 5.0 combo chip. It simultaneously implements two streams of 802.11ax with Bluetooth 5.0+ to enable Wi-Fi speeds up to 1.429 Gb/s on mobile devices such as smartphones and tablets. This chipset supports 1024 QAM modulation, OFDMA and MU-MIMO operation.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, interviews, technical articles and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]