everything RF Newsletter Index

more

25 Feb, 2019 - everything RF Newsletter

RF & Microwave industry updates.

Date: 25 Feb, 2019

MWC 2019 Coverage on everything RF

Latest News this Week

Researchers Reduce RF Interference in Electronics through a New Circuit Board Design - Missouri S&T

mm-Wave Dual Channel Vector Signal Generator with 2 GHz Bandwidth - Keysight Technologies

Qualcomm Introduces 5G RF Front-End Solutions for Sleeker 5G Multimode Mobile Devices - Qualcomm

Fractus Antennas Launches an Ultra-Compact 5G Mobile Antenna - Fractus Antennas

World’s Most Advanced Commercial Multimode 5G Modem to Accelerate 5G Deployment - Qualcomm

Robust RFID UHF Antennas Designed to Last a Lifetime - Feig Electronic

55 Commercial 5G Networks to be Operational by 2020 - Viavi Solutions

Iridium Completes $3 Billion Satellite Constellation Upgrade - Iridium Communications

Sub-Terahertz Wavelength Detection System to Help Autonomous Cars See through Dust and Fog - MIT

GaN-Based Advanced Signal Amplifiers to Enable ESA’s Mission to Survey Global Forest Cover - ESA

Small Cell 5G Network Market to be Worth $3.5 Billion by 2025 - MarketsandMarkets

Rohde & Schwarz Introduces World’s First Combined Test Solution for NB-IoT and Bluetooth - Rohde & Schwarz

Sequans Introduces World’s Most Advanced LTE for IoT Chip Platform - Sequans Communications

Blighter's Micro-Doppler Ground Surveillance Radar Deployed at the Indian Border - Blighter

Xilinx's Single-Chip Adaptable Radio Platform to Support Full sub-6GHz Spectrum - Xilinx

New White Papers

Enhancing Bluetooth Location Services with Direction Finding - Bluetooth SIG

Holographic Beam Forming and MIMO - Pivotal Communications

Reducing Life Cycle Costs with Reliable Airframe Microwave Assemblies - W. L. Gore & Associates

Distributed Antenna System (DAS) for IoT, Cellular and other Wireless Applications - AR RF/Microwave Instrumentation

Network Synthesis Wizard Automates Interactive Matching-Circuit Design - National Instruments

More White Papers

Upcoming Event

Event Image

Mobile World Congress 2019

Date: 25 to 28 February 2019

Location: Barcelona, Spain

Featured Products this Week

RF Switch

1.8 to 3 GHz High-Power SPDT Switch with Integrated Driver

RF Switch from Skyworks Solutions

The SKY12241-492LF from Skyworks is a compact, integrated high-power SPDT switch with driver circuit for TD-LTE applications. Operating from 1.8 to 3 GHz, it has an insertion loss of below 0.55 dB and an isolation of more than 17 dB. It provides a transmit power of up to 50 watts while operating with a single +5 V supply and switches with a single control voltage (0 to 3 V). The device is provided in a 5 x 5 mm, 20-pin Quad Flat No-Lead (QFN) package.

Download Datasheet | Product Details

Wireless SoC

Wave-2 802.11ac SoC for Routers, Gateways and Access Points

Wireless SoC from Qualcomm

The IPQ4019 from Qualcomm is a single-chip Wi-Fi system-on-chip (SoC) for Wave-2 802.11ac. This highly-integrated, single-chip design combines dual-band 11ac, advanced Wi-Fi features and network processing in a variety of configurations for high-performance, power-efficient and cost-effective network infrastructure products.

Download Datasheet | Product Details

RF Transistor

200 W GaN HEMT from 4.4 to 5 GHz

RF Transistor from Wolfspeed, A Cree Company

The CGHV50200F from Wolfspeed is GaN HEMT Transistor that operates from 4.4 to 5 GHz. This transistor has a saturated output power of 180 watts (200 W Peak Power) with a gain of 13 dB and PAE of 33%. It requires a 40 V supply and is matched to 50 ohms at the input and output. This GaN HEMT is ideal for C-Band SATCOM applications and is available in a ceramic/metal flange package.

Download Datasheet | Product Details

Wireless Charging Transmitter

15 W Wireless Charging Transmitter for Mobile Devices

Wireless Charging Transmitter from STMicroelectronics

The STWBC-EP from STMicroelectronics is the digital controller for the wireless battery charger transmitters specifically designed to support the WPC 1.2 EPP (Extended Power Profile) applications up to 15 W. This transmitter is responsible for controlling the transmitting coil and generating the correct amount of power requested by the RX.

Download Datasheet | Product Details

RF Amplifier

250 W Power Amplifier from 100 kHz to 1000 MHz

RF Amplifier from AR RF/Microwave Instrumentation

The 250U1000 from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled CW Amplifier that operates from 100 kHz to 1000 MHz. This broadband amplifier is ideal for applications where instantaneous bandwidth, high gain and linearity are required. The amplifier is available in a benchtop cabinet or rack mount module with front panel control options.

Download Datasheet | Product Details

RF Amplifier

30 W Power Amplifier form 2 to 18 GHz

RF Amplifier from Exodus Advanced Communications

The AMP1070 is a solid state power amplifier that operates from 2 to 18 GHz. This Class AB GaN Amplifier provides an output power (P1dB) of 30 watts with a gain of 45 dB and input return loss of 10 dB. It requires a 32 V supply and draws 11 Amps of current. The amplifier is available in high reliability and rugged module with SMA connectors. It supports all modulation standards.

Download Datasheet | Product Details

RF Amplifier

GPS Low Noise Amplifier from 1200 to 1600 MHz

RF Amplifier from NuWaves Engineering

The HILNA GPS is a broadband low noise amplifier that operates from 1200 to 1600 MHz, specifically targeting the GPS L1 (1575.43 MHz) and L2 (1227.6 MHz) bands. The module delivers a gain of 32 dB with an OIP3 of 30 dBm and noise figure of less than 1 dB. It operates over a supply of 5 to 20 V dc, while consuming less than 150 mA of current. The device is available as a module that measures 3.15 x 2.50 x 1.18 inches with SMA female connectors.

Download Datasheet | Product Details

Directional Coupler

20 dB Directional Coupler from 26 to 34 GHz

Directional Coupler from MECA

The 765-20-30.000 from MECA is a Directional Coupler that operates from 26 to 34 GHz. The coupler provides 20 dB of coupling with a directivity of 13 dB and an insertion loss of 1.2 dB. It can handle up to 20 watts of average power and 1 kW of peak power. The coupler is available in a module with 2.92 mm connectors and is matched to 50 ohms.

Download Datasheet | Product Details

Bias Tee

Broadband DC Bias Tee from 16 KHz to 18 GHz

Bias Tee from HYPERLABS Inc.

The HL9440M is an amplitude and phase-matched Broadband DC Bias Tee that operates from 16 kHz to 18 GHz. It is designed to minimize reflections of high-speed signals at the DC insertion point. The Bias Tee has an insertion loss of under 1 dB, return loss of 25 dB at 10 GHz and can handle a DC current of up to 500 mA while operating over a supply of 10 Vdc.

Download Datasheet | Product Details

Balun

0.2 MHz to 10 GHz, Unbalanced to Balanced Balun

Balun from Marki Microwave

The BAL-0010 from Marki Microwave is a high power, low loss Balun that operates from 200 kHz to 10 GHz (Balanced to Unbalanced Transformer). It has an insertion loss under 7.5 dB, an input 1dB compression of 37 dBm and an isolation of 8 dB. The balun has been tuned for optimal amplitude/phase balance of 6 dB and 6 degree with a VSWR of 1.75:1.

Download Datasheet | Product Details

Cellular Module

Low Power Module with Integrated LTE-M/NB-IoT Modem and GPS

Cellular Module from Nordic Semiconductor

The nRF9160 is a low power System-in-Package with integrated LTE-M/NB-IoT modem and GPS. The module has 1 MB of Flash plus 256 kB of RAM on-board memory with a broad range peripheral set, analog and digital interfaces, 32 GPIOs, a stand-alone modem with full LTE capability, plus a multiband RF front-end.

Download Datasheet | Product Details

Digital Phase Shifter

12-Bit Digital Phase Shifter from 6 to 18 GHz

Digital Phase Shifter from G.T. Microwave, Inc.

The P2P-68T-5 is a 12-Bit digital phase shifter that operates from 6 to 18 GHz. It has a 360-degree phase control range with up to 0.088 degree resolution and switches in less than 500 ns. This device can handle an input power of up to 15 dBm CW and has a VSWR of 1.9:1. The phase shifter is available in a module that measures 3 x 3 x 1 inches and operates over an extended temperature range from -55 to +85 Degrees Celsius.

Download Datasheet | Product Details

Termination

2.92 mm Termination from DC to 40 GHz

Termination from L3 Narda-MITEQ

The 4388M from L3 Narda-MITEQ is a 50 ohms Termination that operates from DC to 40 GHz. This 2.92 mm male termination can handle up to 1 watt of power and has a VSWR of less than 1.20:1. The termination measures 0.75 x 0.28 inches.

Download Datasheet | Product Details

DLVA

62 dB Dynamic Range DC-Coupled DLVA

DLVA from Microphase Corporation

The DSH-3218 from Microphase Corporation is a DC-Coupled DLVA that operates from 2 to 18 GHz. The DLVA has an extended dynamic range from -42 to 20 dBm and TSS of more than -42 dBm. This DLVA has an excellent log slope variation of 50 mV/dB and has fast rise time of up to 20 nS.

Download Datasheet | Product Details

Signal Generator

300 kHz to 8 GHz USB Controlled Signal Generator

Signal Generator from Pico Technology

The PicoSource AS108 Agile Synthesizer is a frequency synthesizer that operates from 300 kHz to 8 GHz. It is designed to meet the needs of both benchtop and integrated module applications. Its broad frequency range, fast settling and programmable phase, frequency and amplitude make it ideal for a wide range of applications, with the added advantages of low cost, small footprint and 12 to 15 V power requirement.

Download Datasheet | Product Details

RF Test Set

Radio Communication Test Station for 5G Test Requirements

RF Test Set from Anritsu

The MT8000A from Anritsu is a Radio Communication Test Station for developing 5G communications terminals, chipsets and devices. This all-in-one desktop tester supports RF and protocol tests for the sub-6 GHz, including band n41 and millimeter wave bands. Combining it with the OTA Chamber enables both millimeter wave band RF measurements and beamforming tests using call connections specified by 3GPP.

Download Datasheet | Product Details

Signal Generator

6 GHz USB Vector Signal Generator

Signal Generator from Triarchy Technologies

The VSG25A from Triarchy Technologies is an USB vector signal generator that operates from 1 MHz to 6.2 GHz. It features a 12-bit I/Q baseband arbitrary waveform generator which can be clocked at virtually any frequency from 54 kHz to 180 MHz, and includes a 4096 times 16 bit pattern buffer for built-in or custom modulation. The VSG6G1 is very compact and easy to carry, thus is an ideal choice for field test applications.

Download Datasheet | Product Details

MWC 2019 Coverage on everything RF

About everything RF

everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, white papers, products, articles, jobs and much more.

To unsubscribe please click here

[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]

Advertisement

Need Help Finding a Product?