PREV 27th Feb, 2019 NEXT

New RF & Microwave Products this Week

27 Feb, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 27 Feb, 2019
 
Sponsored by Maxim
 
 
 
New RF & Microwave Products this Week
Signal Generator
Dual-Channel 44 GHz Microwave Signal Generator

Signal Generator from Keysight Technologies

The M9384B from Keysight Technologies is a dual-channel, multi-touch vector signal generator that operates from 1 MHz to 44 GHz with a 2 GHz RF Bandwidth. This signal generator has an output power range from -110 to 23 dBm. The high output power allows it to compensate for system loss and enable 5G power amplifier and over-the-air (OTA) testing.
 
Download Datasheet | Product Details
 
Antenna
5G mm-Wave Beam-Steering Antenna from 27 to 29 GHz

Antenna from Taoglas

The KSF410.A from Taoglas is a 28 GHz 5G mm-wave beam-steering antenna with a sixteen-element linear phased-array. It delivers a gain of up to 17 dBi and has a wide 3dB beamwidth for wide angular coverage in azimuth, with most of the energy focused within 45° of the main beam. The antenna employs beam steering/forming at the RF level using RF phase and amplitude shifters, or beam forming networks. Antennas in the array are grouped in groups of four, each group with an integrated phase shifter, LNA and power amplifier.
 
Download Datasheet | Product Details
 
OCXO
10 MHz GPS Disciplined OCXO

OCXO from Bliley Technologies

The Atlas 1PPS from Bliley Technologies is a GPS Disciplined OCXO (GPSDO) with a 10 MHz frequency. By combining an OCXO and GPS short and long-term stability, this OCXO provides high precision frequency stability. It has a software interface for BIT status and 1PPS output steering that is not typically provided with traditional GPSDOs. The OCXO has a handover stability of ±10 ppb and requires a steady-state power of 250 mW.
 
Download Datasheet | Product Details
 
Antenna
5G IoT Antenna Booster from 3.4 to 3.8 GHz

Antenna from Fractus Antennas

The DUO mXTEND (NN01-S4-SEN20) Booster / Virtual Antenna from Fractus Antennas is a ultra-compact chip antenna that has been developed for 5G Applications from 3400 to 3800 MHz. The antenna measures just 7.0 mm x 3.0 mm x 2.0 mm and does not require any additional clearence beyond its footprint.
 
Download Datasheet | Product Details
 
Wireless SoC
Wireless SoC for Wi-Fi 6 and Bluetooth 5.1

Wireless SoC from Qualcomm

The QCA6390 from Qualcomm is an advanced 14nm 2x2 Mobile Connectivity SoC supporting the full suite of Wi-Fi 6 and Bluetooth 5.1 features for mobile and computing devices. It is designed to deliver faster, more secure, and more robust Wi-Fi experiences and enable new Bluetooth audio capabilities such as ultra-high-definition voice and low-latency gaming over wireless headphones, earbuds, and speakers.
 
Download Datasheet | Product Details
 
Front End Module
FEM for Wi-Fi 6 (802.11ax) Applications from 5150 to 5925 MHz

Front End Module from Qorvo

The QPF4588 from Qorvo is a front end module for WiFi 6 (802.11ax) access points from 5150 to 5925 MHz. The FEM consists of a 5 GHz power amplifier (PA), regulator, single pole two throw switch (SP2T), bypassable low noise amplifier (LNA), coupler and power detector with optional DC voltage or RF signal output.
 
Download Datasheet | Product Details
 
Sponsored by Maxim
Concerned About GNSS Inaccuracy?
Deliver Pinpoint Navigational Directions from Portable Devices
Worried about GNSS inaccuracy? A multi-constellation GNSS receiver quickly provides accurate location, velocity, and time estimates. Create a more powerful satellite navigation system using the MAX2771 multiband universal GNSS receiver. Click here to learn more.
 
 
 
RF Test Set
Functional Radio Communication Tester up to 6 GHz

RF Test Set from Rohde & Schwarz

The R&S CMW290 is an IoT radio communication tester that simultaneous supports all common wireless communications standards – cellular and non-cellular up to 6 GHz on up to two channels. It is a lean solution that has been optimized for typical hardware verification task and basic mobile network emulation.
 
Download Datasheet | Product Details
 
RF Amplifier
40 W GaN Power Amplifier from 0.6 to 6 GHz

RF Amplifier from Empower RF

he 1219 from Empower RF is a 40 watt solid state broadband high power amplifier that operates from 600 to 6000 MHz. It delivers a gain of 61 dB with a noise figure of 15 dB. This class AB amplifier module is suitable for broadband mobile communications, jamming and band specific high power applications in the UHF, L, S and C frequency bands. It has built-in control and monitoring, with protection functions to ensure high availability.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing

RF Shielded Test Enclosure from RF Electronics

The HDRF-2124-T from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides an isolation of more than 90 dB. It has shielded power filters for providing power connection in the box while blocking all wireless signals.
 
Download Datasheet | Product Details
 
RF Transistor
29 W RF GaN on SiC HEMT from 3.3 to 3.6 GHz

RF Transistor from Wolfspeed, A Cree Company

The GTRA362002FC-V1 from Wolfspeed is a GaN on SiC HEMT that operates from 3.3 to 3.6 GHz. It provides an average power of 29 W with a gain of 13.5 dB and an efficiency of 42% while operating from 48 V supply. This device is available in a thermally-enhanced surface mount package with earless flange and is ideal for multi-standard cellular power amplifier applications.
 
Download Datasheet | Product Details
 
RF Amplifier
300 W Solid State Power Amplifier Module from 2 to 6 GHz

RF Amplifier from Comtech PST

MODEL BME2969-300 from Comtech PST is a solid-state power amplifier module that operates from 2 to 6 GHz. The amplifier provides 300 watts of saturated output power and can accept an input RF power of -10 to 0 dBm. It requires a 28 V DC Voltage and consumes up to 1800 watts of power. It is available in a module that measures 15.25 x 7 x 2.67 inches and weighs 17 lbs.
 
Download Datasheet | Product Details
 
RF Amplifier
15/40 W, Dual-Band Solid-State Amplifier from 0.7 to 18 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 15/40S1G18A is a portable, self-contained, air-cooled, dual-band, broadband, solid-state amplifier that operates from 0.7 to 18 GHz. The amplifier provides an output power of more than 15 watts from 0.7 to 6 GHz and more than 40 watts from 6 to 18 GHz. It has been designed for applications where instantaneous bandwidth, high gain and linearity are required.
 
Download Datasheet | Product Details
 
Sponsored by Maxim
 
 
 
RF Module
High-Performance LoRa Module

RF Module from Miromico

The FMLR-61-U-RSS3 from Miromico AG is a low power LoRaWAN RF Module that can be used to provide low-data rate wireless connectivity over a distance of more than 50km. The module integrates the Semtech SX1261 ultra-long-range spread-spectrum wireless transceiver and Renesas S3A6 ARM Cortex-M4 32-bit microcontroller, and features 256 KB code flash memory, 8 KB data flash, and 32 KB SRAM.
 
Download Datasheet | Product Details
 
Cellular Module
Low Power LTE Cat NB2/GSM Dual-Mode Module

Cellular Module from Quectel

The BC97 from Quectel is a LTE Cat NB2/GSM dual-mode module which supports switchover between GSM and NB-IoT networks and ensures utilizing network coverage of both technologies. The module features low power consumption, extended operating temperature range, global dual-mode operation, and supports GSM Voice and Bluetooth Low Energy (BLE).
 
Download Datasheet | Product Details
 
Directional Coupler
Thermal Vacuum Qualified Directional Coupler from 2 to 8.6 GHz

Directional Coupler from KRYTAR

The 102008616-TV from Krytar is a Thermal Vacuum Qualified Directional Coupler that operates from 2 to 8.6 GHz. It has a coupling value of 16 dB and frequency sensitivity of ±0.25 dB. The coupler has a directivity of over 20 dB and an insertion loss of less than 0.5 dB. It can handle up to 50 watts of average power and has a VSWR of 1.30:1.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
100 W, 90 Degree Hybrid Coupler from 1 to 8 GHz

90 Degree Hybrid Coupler from Werlatone Inc

The QH10828 from Werlatone is a 90 Degree Surface Mount Hybrid Coupler that operates from 1 to 8 GHz. It can handle up to 100 watts of CW power, has an insertion loss of under 0.9 dB, isolation of over 17 dB and a VSWR of 1.40:1. This 3 dB surface mount coupler has a phase balance of +/- 5 Degrees and amplitude balance of +/- 0.7 dB.
 
Download Datasheet | Product Details
 
Directional Coupler
20 W Directional Couplers from 500 MHz to 18.5 GHz

Directional Coupler from Werbel Microwave

The Series C-1185 Directional Couplers from Werbel Microwave operate from 500 MHz to 18.5 GHz. They are available in coupling values of 10, 15, 20 and 30 dB with a directivity of up to 20 dB and a VSWR of 1.4:1. The couplers can handle up to to 20 watts of average power. They are available in a module with SMA connectors which are matched to 50 ohms.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
5-Bit Digital Attenuator from DC to 18 GHz

RF Variable Attenuator from Custom MMIC

The CMD280C3 is a wideband GaAs MMIC 5-bit digital attenuator that operates from DC to 18 GHz (L, S, C, X, Ku Band). Each bit of the attenuator is controlled by a single voltage of either 0 V or -5 V. The attenuator bit values are 0.5 (LSB), 1, 2, 4, and 8 dB, for a total attenuation of 15.5 dB with an attenuation accuracy of 0.1 dB.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
2-Port Computer Controlled Metrology-Grade VNA from 300 kHz to 18 GHz

Vector Network Analyzer from Copper Mountain Technologies

The M5180 is a 2-port compact metrology-grade performance VNA from Copper Mountain Technologies that operates from 300 kHz to 18 GHz. This VNA is available in a more economical package that excludes a number of advanced features. It has a dynamic range of 130 dB and can measure up to 200,001 test points with a speed of 30 µs per point.
 
Download Datasheet | Product Details
 
RFID Tag
Low Cost RFID/NFC Dry Inlay Tag

RFID Tag from Identive

The I00XXXN39025 from IDENTIV is a low-cost RFID tag that has been developed using NXP's near field communication (NFC) IC NTAG210µ. This RFID tag is a dry inlay that is 25 mm in diameter. It is compatible with any Android or Apple iOS 11 and up NFC-enabled device, the inlay is ideal for enabling NFC use cases including Internet of Things (IoT) and customer engagement applications.
 
Download Datasheet | Product Details
 
RFID Antenna
Dual-Element RFID Reader Antenna

RFID Antenna from Zebra

The AN440 from Zebra is a high-performance RFID antenna that operates from 865 to 868 MHz (EU) and 902 to 928 MHz (US). It delivers a gain of up to 6 dBi and can handle an input power of 10 watts. This antenna has a dual-element architecture and is ideal for bi-static operation. It can also be used as two separate monostatic antenna in a single package.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, white papers, information on new product releases, upcoming events and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]