1. everything RF
  2. RF Newsletters
more
PREV 29th April, 2019 NEXT

Latest News & White Papers this Week

29th April, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 29th April, 2019
 
Sponsored by Coilcraft
 
 
 
Latest News this Week
MACOM Getting Ready to Supply GaN-on-Si PA's to the Chinese Basestation Market - MACOM
Compact, Light-Weight and Low Cost 24 GHz Radar - KAUST University
Wire-to-Board RF Coaxial IDC Connectors for Industrial & Automotive Applications - AVX Corporation
World’s First Fully Flexible, High Performance, Ultra-thin Bluetooth IC - Nordic Semiconductor
Keysight's PathWave and RFIC Design Software Now Support Samsung’s 28nm SOI Process - Keysight Technologies
Qualcomm Using Anritsu Solution for 5G Testing - Anritsu
Boston Gets Ready to Host IMS 2019 - The Hub of Microwaves - IEEE MTT-S IMS
Future mm-Wave Networks to Use Both Low & High Frequency Bands to Improve Performance - IMDEA Networks Institute
Internet of the Skies - The Future of Cellular Drones - GSMA
Radomes for Concealment of 5G mm-Wave Radios - Raycap | STEALTH
mm-Wave Security Scanners to be Installed in UK Airports - Rohde & Schwarz
IDT to Highlight Beamforming Solutions at Satellite 2019 - Integrated Device Technology
More News
New White Papers & Articles
Low-Cost EMI Pre-compliance Testing Using a Spectrum Analyzer - Tektronix, Inc.
An Overview of Compact Range Systems - Microwave Vision Group
Creating Advanced Handover Testing Platforms Using Low Cost Programmable Devices - Vaunix
The Basics of the Doherty Amplifier - Orban Microwave
Passive Antenna Measurement and Nearfield - Farfield Transformation - Rohde & Schwarz
More White Papers
Upcoming Event
Event Image
International Microwave Symposium 2019
Date: 2 to 7 June, 2019
Location: Boston, United States
More Events
Sponsored by Coilcraft
Chip Inductors
New Chip Inductors Offer Highest L in an 0201 Sized Package
Coilcraft 0201HL Series chip inductors are available in seven inductance values ranging from 22 to 51 nH, the highest currently offered in a wirewound 0201 package. This range is fully optimized for impedance matching in 700 MHz band LTE and 5G applications. Click here for Free samples!
 
Featured Products this Week
DCXO
Digitally Controlled Differential Oscillator from 220 to 625 MHz

DCXO  from SiTime

The SiT3922 is a highly flexible, differential MEMS DCXO that supports LVPECL and LVDS outputs. This programmable device can generate any frequency from 220 to 625 MHz, along with any combination of voltage (2.5 V & 3.3 V), pull range (±25 ppm to ±1600 ppm) and package (3225, 5032, 7050).
Download Datasheet | Product Details
Microwave Backhaul Radio Links
All-Outdoor Microwave Backhaul Radio from 4.5 to 42 GHz

Microwave Backhaul Radio Links  from Trango Systems

The Apex Orion from Trango Systems is an all-outdoor point-to-point Microwave Backhaul Radio that operates from 4.5 to 42 GHz. It provides up to 761 Mbps full duplex Layer 2 Ethernet throughput in a single polarity 60 MHz channel using multi-layer header compression and up to 1.5 Gbps full duplex in a 2+0 configuration.
Download Datasheet | Product Details
Automotive Radar Chipset
77 GHz Radar Transceiver for Automotive Applications

Automotive Radar Chipset  from NXP Semiconductors

The NXP MR3003 is a high-performance, automotive qualified single chip 76 to 81 GHz transceiver for radar applications. It has been specifically developed for front or corner radar applications in automated driving, where high resolution and long-range capabilities are needed. This transceiver includes 3 transmit and 4 receive channels.
Download Datasheet | Product Details
Diplexer
439 to 511 MHz Ruggedized Cavity Diplexer

Diplexer  from Networks International Corporation

This Ruggedized Cavity Diplexer from Networks International Corporation has a passband from 439 to 472 MHz and 488 to 511 MHz. It has an insertion loss of under 1.3 dB with more than 60 dB of rejection over the band. The Diplexer can handle up to 50 watts of CW power and has a VSWR of 1.30:1. It is available in a module that measures 9 x 3.59 x 1.75 inches with BNC female connectors and is ideal for airborne, shipborne or vehicle mount applications in harsh military environments.
Download Datasheet | Product Details
RF Amplifier
250 W Solid State Power Amplifier from 10 kHz to 2 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2142ADB-250 is a solid state high power amplifier that operates from 10 kHz to 2 GHz. It provides an output power of more than 250 watts with a gain of over 54 dB. This Class A/AB linear amplifier is based on LDMOS/GaN devices and can be controlled via the front panel on the amplifier system or remotely.
Download Datasheet | Product Details
RF Amplifier
20 W Solid State Power Amplifier from 0.7 to 4.2 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 20S1G4 from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled, broadband amplifier that operates from 0.7 to 4.2 GHz. The device is designed for applications where instantaneous bandwidth and high gain are required. It provides a minimum of 20 watts of RF power with a gain of over 43 dB.
Download Datasheet | Product Details
Vector Network Analyzer
High-End VNAs from 10 MHz to 26.5/43.5 GHz

Vector Network Analyzer  from Rohde & Schwarz

The R&S ZNA series of 2/4 ports high-end vector network analyzers operate from 10 MHz to 26.5/43.5 GHz (R&S ZNA26/43). These VNAs are a powerful, universal test platform for characterizing active and passive DUTs. They provide an outstanding dynamic range of 146 dB and a trace noise as low as 0.001 dB at 1 kHz IF bandwidth.
Download Datasheet | Product Details
RF Module
Ultra-Low-Power Sigfox-Verified Module for IoT Applications

RF Module  from LITE-ON Technology

The WSG303S is a Sigfox Verified RF Module for IoT applications that support RCZ1 (Europe, Oman, Iran, and South Africa). It integrates ST's S2-LP sub-1GHz RF transceiver and STM32 microcontroller. The module provides an output power of up to 14 dBm while consuming up to 16 mA of current.
Download Datasheet | Product Details
Limiter
100 W Passive Limiter from 10 MHz to 15 GHz

Limiter  from Planar Monolithics Industries

The LM-20M15G-100W-15DBM from PMI RF is an RF Limiter that operates from 10 MHz to 15 GHz. It can handle up to 1 kW of peak power and 100 watts of CW power with leakage of less than 15 dBm and a recovery time of less than 100 ns. The limiter has an insertion loss of below 1.6 dB and a VSWR of 2.0:1. It is available in a module that measures 0.9 x 0.38 x 0.38 inches with SMA female connectors.
Download Datasheet | Product Details
RF Amplifier
2.7 to 3.5 GHz GaN MMIC Power Amplifier for Radar Applications

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA2735075F from Wolfspeed is a two-stage GaN Power Amplifier that operates from 2.7 to 3.5 GHz. This MMIC Power Amplifier provides an output power of 80 W and a gain of over 27 dB while operating from a 28 V supply. It is available in a ceramic/metal flange package that measures 0.5 x 0.5 inches and is ideal for civil and military pulsed radar amplifiers.
Download Datasheet | Product Details
RF Variable Attenuator
UltraCMOS Digital Step Attenuator from 9 kHz to 55 GHz

RF Variable Attenuator  from pSemi

The PE43508 from pSemi is a 6-bit, 50-ohm Digital Step Attenuator that operates from 9 kHz to 55 GHz. It has a 31.5 dB attenuation range in 0.5 dB and 1 dB steps, and it is capable of maintaining 0.5 dB and 1 dB monotonicity through its 55 GHz bandwidth. This high-performance DSA features low insertion loss, low attenuation error and good return loss.
Download Datasheet | Product Details
Power Divider
30 W, 2-Way Power Divider from 18 to 40 GHz

Power Divider  from MECA

The 802-3-29.000 from MECA is a 2-way power divider that operates from 18 to 40 GHz. It can handle up to 30 watts of power, has an insertion loss of under 1.80 dB and isolation over 14.5 dB. The power divider is available in a module with 2.92 mm female connectors.
Download Datasheet | Product Details
Wireless Charging Receiver
10 W Charging Receiver IC for Wireless Power Applications

Wireless Charging Receiver  from Semtech

The TS51111 from Semtech is a fully-integrated synchronous rectifier that supports both WPC Qi complaint and non-complaint wireless charging systems up to 10 W. The high-efficiency synchronous rectifier converts the input AC power signal to a DC output level for battery charging. The device supports both direct battery charging and indirect power applications.
Download Datasheet | Product Details
RF Cable
Phase/Temperature Stable RF Cables up to 40 GHz

RF Cable  from ConductRF

The PFT series of Low Loss, Phase/Temperature stable RF cable assemblies operate up to 40 GHz. The cables are available in two diameters - the 0.086-inch diameter that facilitates greater flexibility and handling and the 0.141-inch diameter that exploits the same great performance but with almost half the loss.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
Surface Mount 90 Degree Hybrid Coupler from 690 to 6000 MHz

90 Degree Hybrid Coupler  from Innovative Power Products

The IPP-7148 from Innovative Power Products is a surface mount 90-degree hybrid coupler that operates from 690 to 6000 MHz. The coupler can handle up to 130 watts of power and has a VSWR of 1.35:1. It has a low insertion loss of 0.8 dB and high isolation of 16.5 dB. The coupler is available in a compact SMT package that measures 0.50 x 1.00 inches.
Download Datasheet | Product Details
USB Power Sensor
10 MHz to 33 GHz USB Power Sensor

USB Power Sensor  from Anritsu

The MA24330A from Anritsu is a USB power sensor that can measure power from 10 MHz to 33 GHz over 90 dB of dynamic range. The sensor provides measurement speeds of over 2,100 continuous power readings/s and above 5,600 buffered readings/s. Its low noise design eliminates the need to zero the sensor before taking measurements for most applications.
Download Datasheet | Product Details
In Series RF Adapter
SMA Female to Female to Female Adapter up to 18 GHz

In Series RF Adapter  from SV Microwave

The M55339/30-30003 from SV Microwave is an SMA Female to Female to Female Adapter that operates up to 18 GHz (26.5 GHz versions available). This 50 Ohm adapter has a dielectric withstanding voltage of 1000 VRMS and can be used for more than 500 mating cycles. It operates over a temperature range of -65 to 165 degree Celcius.
Download Datasheet | Product Details
Sponsored by Coilcraft
Wirewound Ferrite Beads
Wirewound Ferrite Beads Offer a High Magnitude of Attenuation across a Wide Frequency Range
Coilcraft wirewound ferrite beads provide superior attenuation and frequency performance, allowing smaller solution sizes compared to traditional thick-film chip ferrite beads. Click Here to Learn more!
 
About everything RF
everything RF keeps users up to date with the RF & Microwave industry. We provide the latest news, product information, articles, interviews and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]