PREV 1st May, 2019 NEXT

New RF & Microwave Products this Week

1 May, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
Date: 1 May, 2019
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
RF Amplifier
10 W GaN Distributed Amplifier from 2 to 20 GHz

RF Amplifier  from Altum RF

The ARF1307C7 from Altum RF is a GaN distributed amplifier that operates from 2 to 20 GHz. The amplifier provides 20 dB of small signal gain, 10 W of saturated output power with 14 dB of power gain and 25% power added efficiency. It is available in a RoHS-compliant 7 x 7 mm ceramic QFN package and is suitable for higher performance commercial and defense-related applications, such as test & measurement equipment, EW, and commercial or defense radar systems.
Download Datasheet | Product Details
Waveguide Mixer
40 to 60 GHz Sub Harmonic Mixer

Waveguide Mixer  from Farran Technology

The SPM-19-000X is a Sub-Harmonic Mixer that operates from 40 to 60 GHz. It has a LO frequency from 20 to 30 GHz and an IF Frequency from 0.01 to 6 GHz. The mixer has a LO Drive power from 7 to 13 dBm and a conversion loss of 6 dB. It has a WR-19 Waveguide interface at the RF port, K Type connector at the LO port and SMA Female connector at the IF port.
Download Datasheet | Product Details
RF Switch
SPDT Reflective Coaxial Switch from 50 to 86 GHz

RF Switch  from RF-Lambda

The RFSP2TR50G90G from RF-Lambda is a reflective coaxial SPDT switch that operates from 50 to 86 GHz. It has an insertion loss of less than 7 dB, isolation of more than 22 dB and switching speed of under 100 ns. The switch can handle an input power of up to 23 dBm and requires a supply voltage of +5V / -5V. It is available in a module with 1.0 mm female connectors and is ideal for test & measurement, R&D, military and aerospace applications.
Download Datasheet | Product Details
Low Pass Filter
Low Pass Filters from DC to 20 GHz

Low Pass Filter  from Wainwright Instruments

The WLNX10 is a series of Low Pass Filters with a passband from DC to 20 GHz. The cutoff frequency (Fco) of the filter can be customized between 6 to 20 GHz. These filters have an insertion loss of under 1.2 dB and a stopband attenuation of over 40 dB. The LPFs can handle an input power of up to 20 watts CW and have a 2:1 VSWR. They are available in a module with connectors that measures 37 x 10 x 10 mm with PC 2.92 male/female connectors.
Download Datasheet | Product Details
OCXO
12.8 MHz High stability Low Phase-Noise OCXO

OCXO  from Dynamic Engineers

The OCXO2525AW-12.8MHz-A-V from Dynamic Engineers is an OCXO that operates at 12.8 MHz. It has a phase noise of -150 dBc/Hz at 1 kHz and stability of ±1 ppb over a temperature range from 0 to 70°C. The device requires a supply voltage of 5 V and provides an HCMOS waveform output.
Download Datasheet | Product Details
Mechanical Phase Shifter
100 W Mechanical Phase Shifter from DC to 18 GHz

Mechanical Phase Shifter  from ARRA Inc.

The 9426A from ARRA is a variable phase shifter that provides a phase shift of 60° /GHz from DC to 18 GHz. This phase shifter can handle up to 100 watts of power and 5kW of Peak power. It has an insertion loss of less than 1 dB up to 18 GHz and an insertion delay of under 1.1 nsec. This phase shifter can be controlled by a 1/4 inch non translating shaft and has an optional digital readout option. It is available in a module with SMA or N Type connectors.
Download Datasheet | Product Details
Sponsored by Mouser
Microchip Technology SAM R35
Microchip Technology SAM R35 LoRa® Sub-GHz System-in-Package (SiP) MCU's
Feature a 32-bit Arm® Cortex-M0+ processor that runs up to 48MHz (2.46 CoreMark/MHz) and offer 256KB of flash, 40KB of SRAM, along with an area of battery backed-up SRAM. Click here to learn more.
 
Band Pass Filter
2.4 to 2.5 GHz Cavity Band Pass Filter

Band Pass Filter  from Mini Circuits

The ZVBP-2450-S+ from Mini Circuits is a cavity bandpass filter with a passband from 2400 to 2500 MHz. It has an insertion loss of 0.7 dB and can handle up to 15 W of power while operating at a wide temperature range from -40 to 85 Degrees Celcius. The filter is available in a connectorized package with SMA female connectors and is ideal for radio location, ISM and mobile communication applications.
Download Datasheet | Product Details
Power Divider
4-Way Power Divider from 20 MHz to 3 GHz

Power Divider  from UMCC

The PS-3000-4S from UMCC is a 4-way power divider that operates from 20 MHz to 3 GHz. It has an insertion loss of under 2.2 dB, isolation of over 18 dB and can handle an average input power of up to 8 watts. The device is available in a module with SMA female connectors.
Download Datasheet | Product Details
RF Amplifier
30 W Hybrid Power Amplifier from 0.7 to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 30HM1G6-45 from AR RF/Microwave Instrumentation is a compact hybrid power amplifier module that operates from 0.7 to 6 GHz. When used with a sweep generator, it provides an output power of more than 30 watts with a gain of 48 dB and excellent flatness, noise figure and intermodulation distortion over the band.
Download Datasheet | Product Details
RF Amplifier
DC to 26.5 GHz Low Phase Noise Amplifier

RF Amplifier  from Custom MMIC

The CMD275 from Custom MMIC is a wideband GaAs MMIC distributed low noise amplifier die which operates from DC to 26.5 GHz. The amplifier provides 16 dB of gain, a saturated output power of 20.5 dBm and a noise figure of 5.5 dB at 10 GHz. The CMD275 provides low phase noise performance of -165 dBc/Hz at 10 kHz offset. It is matched to 50 ohms which eliminate the need for RF port matching. This broadband device is ideally suited for military, space and communications systems.
Download Datasheet | Product Details
RF Amplifier
Wideband Distributed Amplifier from 100 kHz to 67.5 GHz

RF Amplifier  from MACOM

The MAAM-011238-DIE from MACOM is a wideband distributed amplifier that operates from 100 kHz to 67.5 GHz. The amplifier provides 14 dB of gain, 33 dBm of P3dB and has a 4.5 dB noise figure at 30 GHz. The input and output pins are matched to 50 ohms with a typical return loss of more than 12 dB. The amplifier requires a positive bias voltage of 6 V and draws 135 mA.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 0.5 to 40 GHz

RF Amplifier  from Planar Monolithics Industries

The PEC-42-500M40G-20-12-292FF from PMI is a low noise amplifier that operates from 0.5 to 40 GHz. It has a gain of 42 dB with a flatness of ±2.5 dB and a noise figure of 5.5 dB. The LNA provides a saturated output power of up to 23 dBm while operating over a 12-15 V supply and drawing under 450 mA of current. It is available in a module that measures 1.37 x 1 x 0.6 inches with 2.92 mm female connectors.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
Wireless SoC
Wi-Fi 6-ready Chipset with Bluetooth 5, WPA3 Security, and Digital FM

Wireless SoC  from Qualcomm

The WCN3998 from Qualcomm is a 2x2 Wi-Fi 6-ready integrated chipset with Bluetooth 5, WPA3 Security, and digital FM. Ideal for smartphones and computing devices, this mobile connectivity chipset supports WPA3 encryption, the latest and most secure protocol announced by the Wi-Fi Alliance that provides robust protection of user passwords and stronger privacy in Wi-Fi networks.
Download Datasheet | Product Details
Frequency Synthesizer
187.5 MHz to 18 GHz RF Synthesizer with Integrated VCO

Frequency Synthesizer  from Integrated Device Technology

The 8V97003 is a Wideband Microwave Synthesizer / Phase Lock Loop (PLL) that can generate output frequencies up to 18 GHz. This device has an integrated Voltage Controlled Oscillator (VCO) with a figure of merit of -237 dBc/Hz and very low phase noise and RMS phase jitter.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
500 W, 90 Degree Hybrid Coupler from 950 to 1850 MHz

90 Degree Hybrid Coupler  from Werlatone Inc

The QH11016 from Werlatone is a 90 Degree Hybrid Coupler that operates from 950 to 1850 MHz. It can handle up to 500 watts of CW power, has an insertion loss of under 0.2 dB, isolation of over 19 dB and a VSWR of 1.25:1. This 3 dB surface mount coupler has a phase balance of +/- 5 Degrees and amplitude balance of +/- 0.5 dB. It is available in a 2.0 x 1.0 x 0.28 mm drop-in package.
Download Datasheet | Product Details
RF & Microwave Isolator
20 to 30 GHz Coaxial Isolator

RF & Microwave Isolator  from DiTom Microwave

The D3I2030 from Ditom is a coaxial isolator that operates from 20 to 30 GHz. It has an isolation of over 16 dB with an insertion loss of below 0.7 dB and can handle up to 5 watts of average forward power, 2 watts of reflective power and 30 watts of peak power. The isolator is available in a module with K-type female connectors.
Download Datasheet | Product Details
Directional Coupler
10 dB Directional Coupler from 1 to 4 GHz

Directional Coupler  from Amtery

The CP10104A-10 from Amtery is a Directional Coupler that operates from 1 to 4 GHz. It has a coupling value of 10 dB, directivity of over 19 dB and an insertion loss of under 1.3 dB. The coupler can handle up to 20 watts of power and is available in a module with SMA female connectors.
Download Datasheet | Product Details
RFID Reader IC
RAIN RFID UHF Reader Module with Four Antenna Ports

RFID Reader IC  from Impinj

The Indy RS2000 is a RAIN RFID UHF reader module that has a receiver sensitivity of -74 dBm and provides output power from 10 to 31.5 dBm. It has four antenna ports that enable a diverse range of fixed and mobile readers for inventory management, asset tracking, logistics, and industrial automation. The module is available in a 38 x 52 x 4 mm package and has a 10 meters read range.
Download Datasheet | Product Details
Antenna
LTE-MIMO/WiFi-MIMO/GNSS Antenna

Antenna  from Maxtena

The NETZ 5 in 1 from Maxtena is an LTE-MIMO/WIFI-MIMO/GNSS antenna that is ideal for high data throughput and streaming, video, industrial and IOT applications. This 5 in 1 solution has two LTE antennas, two WiFi antennas, and 1 GNSS antenna. The antenna measuring 141.98 x 66.5 mm has a low profile design with easy mounting and integrated SMA connectors.
Download Datasheet | Product Details
Antenna
Triple-Band Helix Antenna for Counter Drone Applications

Antenna  from Cobham Antenna Systems

The TAMH-1.6-2.4-5.8/2453 from Cobham is a Triple-band Helix antenna system designed for Counter Drone Applications. This antenna consists of three antennas in a single radome, covering the three most popular commercially used bands: 1.6 GHz (GPS), 2.4 GHz and 5.8 GHz. It is designed using SWaP principles – improved performance while reducing Size, Weight and Power requirement for hand-held and fixed installations.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, articles, white papers, interviews and much more.