|
RF & Microwave industry updates.
| New RF & Microwave Products this Week |
|
| Ku-Band SATCOM Receiver IC |
Receiver
from Integrated Device Technology
|
| The F6101 is an 8-element receiver IC that operates from 10 to 14 GHz. It is designed using a SiGe BiCMOS process for Ku-Band SATCOM, Weather Radar, Test and Measurement and other phased array applications. The core IC has 6-bit phase control coupled with up to 30 dB of gain control on each channel to achieve fine beam steering and gain compensation between radiating elements. |
|
Download Datasheet |
Product Details
|
|
|
|
|
|
| GaN Doherty Hybrid Power Amplifier from 3400 to 3600 MHz |
RF Amplifier
from RFHIC
|
| The RPAM35016-25 from RFHIC is a two-state Doherty GaN hybrid power amplifier that operates from 3.4 to 3.6 GHz. This hybrid amplifier has been developed for 5G Massive MIMO systems, small cells, and low power remote radio heads. It provides an output power of up to 100 watts (50 dBm) with a gain of 27 dB. The amplifier requires a 48 V supply and is available in a surface mount package that measures 13 x 17 x 2.2 mm. |
|
Download Datasheet |
Product Details
|
|
|
|
|
|
| 8-Channel Digital Attenuator from 0.2 to 6 GHz |
RF Variable Attenuator
from Vaunix
|
| The LDA-906V-8 from Vaunix is a highly accurate, bidirectional, 8-Channel Digital Attenuator that operates from 0.2 to 6 GHz. It has a step size of 0.1 dB and typical accuracy 0.25 dB over a 90 dB of control range. This lab brick can handle up to 26 dBm of input power. This Digital Attenuator a portable USB powered device that is sized to fit into a single rack unit for ATE applications. It can be used with WiMAX, 3G, 4G, 5G, LTE, DVB and microwave radio fading simulators as well as in engineering and production test labs. |
|
Download Datasheet |
Product Details
|
|
|
|
|
|
| DC to 40 GHz Broadband Pick-off Tee |
Pick-off Tee
from HYPERLABS Inc.
|
| The HL9465 is a Broadband Pick-off Tee that operates from DC to 40 GHz. It can be used as a trigger source with minimum perturbation of the through signal path. The Pick-off has a thru insertion loss of -4 dB, a pick-off insertion loss of -14 dB and can handle an input power of up to 30 dBm. It is available in a module that measures 32.69 x 24.23 x 13.59 mm with 2.4 mm male/female connectors at the input, pick-off and output interfaces. |
|
Download Datasheet |
Product Details
|
|
|
|
|
|
| Low Noise Gain Block Amplifier from 4 to 6 GHz |
RF Amplifier
from Qorvo
|
| The QPL9098 is an ultra-low noise gain block amplifier that operates from 4 to 6 GHz. At 5.5 GHz, the amplifier provides a gain of 19 dB, OIP3 of 32 dBm and a noise figure of 1.3 dB while drawing 68 mA current from a 4.2 V supply. The LNA integrates a bypass path and is internally matched to 50 ohms. It requires only four external components for operation from a single positive supply: an external RF choke and blocking/bypass capacitors. |
|
Download Datasheet |
Product Details
|
|
|
|
|
|
| SP4T Reflective Switch from 100 MHz to 44 GHz |
RF Switch
from Analog Devices
|
| The ADRF5046 is a silicon-based, reflective SP4T Switch that operates from 0.1 to 44 GHz. The switch has a low insertion loss of under 3 dB and an isolation of more than 35 dB. It has an RF input power handling capability of 27 dBm for both the through path and hot switching. The switch draws a low current of 3 microA from a positive supply of +3.3 V and -110 microA from a negative supply of -3.3 V. |
|
Download Datasheet |
Product Details
|
|
|
|
|
|
| Low Power, Dual-band Wi-Fi and Bluetooth Module |
RF Module
from Telit Communications
|
| The WE866C3-P is a low power, dual-band Wi-Fi and Bluetooth module designed for enterprise, transportation and industrial applications. This module supports Wi-Fi - 802.11 a/b/g/n/ac and Bluetooth 5 at 2.4 GHz. It has an integrated LTE-WiFi/BLE coexistence filter, that offers a powerful cellular backhaul with Telit's LE910Cx 4G LTE module family. The module also has a high bandwidth Wi-Fi/BLE transceiver solution for Linux & Android powered IoT systems, using the advanced 802.11ac technology. |
|
Download Datasheet |
Product Details
|
|
|
|
|
|
| Wideband LTE/Cellular/5G SMD Antenna |
Antenna
from Taoglas
|
| The Reach PCS.66.A from Taoglas is an LTE/Cellular/5G SMD antenna that operates from 600 to 6000 MHz covering all LTE cellular bands and all sub-6 GHz bands for 5G deployments. It also covers 3G and 2G bands to allow for fall-back when LTE is not available. This omnidirectional antenna delivers a gain of up to 5.7 dBi with an efficiency as high as 80% and can handle an input power of up to 5 watts. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| | About everything RF | | everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, white papers, articles, interviews and much more. |
|
|
../
TOP
Please Wait...
Newsletter
|
|