1. everything RF
  2. RF Newsletters
more
PREV 13th May, 2019 NEXT

Latest News & White Papers this Week

13 May, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
Date: 13 May, 2019
 
Sponsored by Keysight Technologies
 
 
 
Latest News this Week
Millimeter Wave Test Solution for 5G-NR Devices up to 70 GHz - Advantest
Ampleon Introduces Rugged 2 KW LDMOS Transistor for ISM Applications - Ampleon
Cree to Invest $1 Billion to Expand its Silicon Carbide Capacity - Wolfspeed, A Cree Company
u-blox Signs Global Distribution Agreement with Digi-Key - u-blox AG
Pasternack Introduces millimeter-Wave Horn Antennas up to 220 GHz - Pasternack Enterprises Inc
Researchers Develop Radar Sensors that Can be Embedded in Car Headlights - Fraunhofer
Tiny Antenna for GNSS Applications that Require Higher Accuracy - Antenova
A Rising demand for Autonomous Vehicles Strengthens the Global Automotive Radar Market - Yole Développement
High Performance Composite Carbon Fiber Antennas for Satellite Communications - Calian
HENSOLDT Unveils AESA-Based Naval Friend or Foe Identification Systems - HENSOLDT
Anokiwave Introduces Ku Band Beamformer ICs for Phased Array-based SATCOM Ground Terminals - Anokiwave
Mission Microwave Unveils New Ka-Band BUCs for LEO/MEO/GEO Satellite Networks - Mission Microwave
Norsat Introduces New Line of GaN-Based Block Upconverters - Norsat
More News
New White Papers & Articles
The Importance of Filters in Point-to-Point Microwave Cellular Backhaul Networks - Anatech Electronics
WiGig Technology Antenna Evaluation - Microwave Vision Group
Evolution of the Modern Receiver in a Crowded Spectrum Environment - Rohde & Schwarz
Is Your Spectrum Monitoring Tool Prepared For Modern Communication Technologies? - Berkeley Nucleonics Corporation
IP2 Measurements of Wideband Amplifiers - Custom MMIC
More White Papers
Upcoming Event
Event Image
Space Tech Expo USA 2019
Date: 21 to 22 May, 2019
Location: California, United States
More Events
Sponsored by Keysight Technologies
Keysight
Ensure 5G QoS: Get Coexistence Poster
Today’s spectrum is already overcrowded. 5G NR needs to operate without introducing interference. Get Keysight’s Coexistence poster: Reference tables of frequency ranges and operating bands, Top 5 issues that jeopardize quality of service, Terms and acronyms, Solutions for coexistence testing. Request a copy.
 
Latest News & White Papers this Week
RF Variable Attenuator
31.5 dB Digital Attenuator from 1 MHz to 2 GHz

RF Variable Attenuator  from pSemi

The PE43665 from pSemi is a 75-Ohm, 6-Bit Digital Step Attenuator that operates from 1 MHz to 2 GHz. It has an attenuation range of 31.5 dB with a step size of 0.5 dB. This DSA operates on a single 3-volt supply and maintains high attenuation accuracy over frequency and temperature. The PE43665 exhibits very low insertion loss and low power consumption.
Download Datasheet | Product Details
DC Block
2.92mm DC Block from 4 kHz to 40 GHz

DC Block  from Marki Microwave

The DCZ(M-F)29(M-F)29 from Marki Microwave is a DC block with 2.92mm connectors that operates from 4 kHz to 40 GHz. It has an insertion loss of less than 1.4 dB and can handle up to 1 watt of input power with a voltage rating of 16 V.
Download Datasheet | Product Details
Delay Line
Dual-Channel Programmable Delay Line from DC to 18 GHz

Delay Line  from Colby Instruments

The PDL-200A-625PS from Colby Instruments is a series of dual-channel programmable delay line that operates from DC to 18 GHz. These delay lines provide a delay from 0 to 625 ns on both channels with a resolution of 0.50 picoseconds (ps). They can handle up to 10 watts of power and are available as a module with SMA connectors.
Download Datasheet | Product Details
Diplexer
2.45 / 5.4 GHz Low Loss Ceramic Chip Diplexer for Wi-Fi

Diplexer  from Johanson Technology

The 2450DP15L5400 from Johanson Technology is a low loss ceramic chip diplexer with a low passband from 2.4 to 2.5 GHz and high passband from 4.9 to 5.95 GHz. It provides isolation of more than 20 dB with an insertion loss of less than 0.65 dB. The diplexer can handle up to 2 watts of power. This diplexer has been developed for Wi-Fi applications and exhibits low pass filtering (LPF) for the 2G band and bandpass filtering (BPF) for the 5G Band.
Download Datasheet | Product Details
DLVA
2 to 18 GHz SDLVA with 60 dB Dynamic Range

DLVA  from Akon Inc

The A15-MH069 from Akon is an SDLVA (Successive Detector Log Video Amplifier) that operates from 2 to 18 GHz. It has a dynamic range of 60 dB and Tangential Signal Sensitivity (TSS) of -66 dBm. This SDLVA has an excellent log slope variation and has a fast rise and fall times of 10 nS and 40 nS. It is available in a ruggedized package that measures 3.2 x 1.85 x 0.4 inches and is ideal for Military, Space and Industrial applications.
Download Datasheet | Product Details
Signal Generator
300 kHz to 8 GHz USB Controlled Signal Generator

Signal Generator  from Pico Technology

The PicoSource AS108 Agile Synthesizer is a frequency synthesizer that operates from 300 kHz to 8 GHz. It is designed to meet the needs of both benchtop and integrated module applications. Its broad frequency range, fast settling and programmable phase, frequency and amplitude make it ideal for a wide range of applications, with the added advantages of low cost, small footprint and 12 to 15 V power requirement
Download Datasheet | Product Details
RF Test Set
Small, Light and Economical Base Station Analyzer for 2G/3G/4G Applications

RF Test Set  from Anritsu

The MT8212E Cell Master Base Station Analyzer from Anritsu is a small, light and economical solution for 2G/3G/4G, and WiMAX base station transmitter testing and ISDB-T and DVB-T/H digital broadcast field testing from 2 MHz to 4 GHz. It's ideal for installation and commissioning as well as for maintenance and troubleshooting.
Download Datasheet | Product Details
RF Spectrum Recording and Playback System
Multi-Channel RF Record & Playback System from 10 MHz to 6 GHz

RF Spectrum Recording and Playback System  from Averna

The RP-6100 from Averna is an RF Spectrum Recording and Playback System that operates from 10 MHz to 6 GHz. This multichannel device has a bandwidth of up to 160 MHz with a 1 Hz step frequency resolution. This system can capture most worldwide broadcasting standards like GNSS, HD Radio, LTE, and WiFi. It has a dynamic range of 80 dB and channel switching time of under 2 ns.
Download Datasheet | Product Details
RF Amplifier
30 W Hybrid Power Amplifier from 1 to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 30HM1G6AB-45 from AR RF/Microwave Instrumentation is a compact hybrid power amplifier module that operates from 1 to 6 GHz. When used with a sweep generator, it provides an output power of more than 30 watts with a gain of 48 dB and excellent flatness, noise figure and intermodulation distortion. This power amplifier can be used for both military and commercial applications.
Download Datasheet | Product Details
RF Amplifier
5.2 to 5.9 GHz GaN MMIC Power Amplifier for Radar Applications

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA5259050F from Wolfspeed is a GaN MMIC Power Amplifier that operates from 5.2 to 5.9 GHz. This C-Band MMIC Power Amplifier provides an output power of 50 W and a gain of over 30 dB with a drain efficiency of 50%, while operating at 28 V.
Download Datasheet | Product Details
Band Pass Filter
6 to 12 GHz Digitally Tunable Filter Bank

Band Pass Filter  from Atlanta Micro

The AM3065 from Atlanta Micro is a miniature filter bank IC that contains digitally tunable bandpass filters operating from 6 to 12 GHz. It has an insertion loss of less than 4 dB and can handle up to 40 dBm of power. The filter has separate low-pass and high-pass tuning voltages that provide independent control of both the center frequency and bandwidth.
Download Datasheet | Product Details
Block Up Converter
260 W Ku-band GaN Block Up Converters

Block Up Converter  from New Japan Radio

The NJT8371 series from New Japan Radio is Ku-band GaN Block Up Converters with an output power of 40 W. They accept an input signal from 950 to 1450 MHz and upconvert it to 13.75 to 14.5 GHz. The RoHS complaint BUC's consume 260 Watts of power while operating from a DC supply of 36 to 60 V.
Download Datasheet | Product Details
RF Cable
Low Loss, Phase Stable Flexible Cables Operating up to 40 GHz

RF Cable  from Electro-Photonics LLC

The LL100 Series from Eletro-Photonics are low loss and phase stable flexible cables that operate up to 40 GHz. These cables have good return loss, insertion loss and amplitude stability. The 50 ohm cables are available in custom lengths with various connector options.
Download Datasheet | Product Details
Wireless Charging Transmitter
15 Watt Multi-Coil Wireless Charging Transmitter for Mobile Devices

Wireless Charging Transmitter  from STMicroelectronics

The STWBC-MC from STMicroelectronics is the digital controller for the wireless battery charger transmitters specifically designed to support the Qi MP-A15 EPP (Extended Power Profile) multi-coil applications up to 15 W. This Qi 1.2.4 compliant transmitter detects a valid receiver and selects the most efficient coil for power transfer, and also ensures extended Foreign Object Detection (FOD) through bi-directional communication with the receiver.
Download Datasheet | Product Details
GNSS Module
GNSS Location IC with an Integrated Sensor Hub

GNSS Module  from Broadcom

The BCM47755 from Broadcom is a single-chip device that combines location awareness capabilities with the typical functions of a sensor hub. The combination provides synergistic benefits that cannot be achieved with multiple ICs, such as low power consumption, higher accuracy, reduced footprint and a smaller BOM.
Download Datasheet | Product Details
Sponsored by Keysight Technologies
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, interesting white papers, articles, interviews and much more.