PREV 15th May, 2019 NEXT

New RF & Microwave Products this Week

15 May, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
Date: 15 May, 2019
 
Sponsored by Signal Hound
 
 
 
New RF and Microwave Products this Week
Band Pass Filter
35200 MHz Waveguide Bandpass Filter

Band Pass Filter  from Anatech Electronics

The AE35200WB11561 from Anatech Electronics is a Waveguide Band Pass Filter with a center frequency of 35200 MHz and bandwidth of 500 MHz. The filter has an insertion loss of under 2 dB and more than 50 dB of rejection above and below the passband. It can handle up to 10 watts of power and is available in a module that measures 80 x 15 x 8.5 mm with 2.92 mm female connectors.
Download Datasheet | Product Details
RF Amplifier
Linear Gain Block from 0.05 to 3.8 GHz

RF Amplifier  from Guerrilla RF

The GRF2011 from GuerrillaRF is a broadband linear gain block that operates from 50 to 3800 MHz. It provides a P1dB of 22.7 dBm with a gain of 15.2 dB and a noise figure of 2 dB while operating at 900 MHz. The device requires a supply voltage from 2.7 to 8 V and consumes up to 100 mA of current. It is available in a 1.5 x 1.5 mm surface mount package and is ideal for small cells, wireless infrastructure and cellular repeater applications.
Download Datasheet | Product Details
RF Transistor
20 W Power Transistor from DC to 18 GHz

RF Transistor  from United Monolithic Semiconductors

The CHK8015-99F from UMS is a Gallium Nitride High Electron Mobility Transistor that operates up to 18 GHz. It provides 20 watts of power with 17 dB of signal gain and a power added efficiency of 68% @ 9 GHz. This device requires a 30 V supply and has been designed for a variety of RF power applications.
Download Datasheet | Product Details
RF Transistor
RF Heterojunction Bipolar Transistor from DC to 12 GHz

RF Transistor  from Infineon Technologies

The BFR740EL3 is a wideband RF heterojunction bipolar transistor (HBT) that operates from DC to 12 GHz. It delivers a gain of 20 dB with a noise figure of 0.8 dB @ 5.5 GHz while operating from a 3 V supply. This device is available in a low profile and small form factor leadless surface mount package. It is ideal for wireless communications, GNSS, satellite communications, ISM, TV, CATV and FM radio applications.
Download Datasheet | Product Details
RF Amplifier
500 W GaN Power Amplifier from 0.8 to 4.2 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2090B is a solid state power amplifier from Exodus that operates from 0.8 to 4.2 GHz. It provides an output power of more than 500 watts with a gain of over 57 dB. The class AB linear GaN amplifier has a wide instantaneous bandwidth and is suitable for all single channel modulation standards. It is available in a 6U rackmount chassis with N-type female connectors and has built-in protection circuits.
Download Datasheet | Product Details
RF Switch
400 W Symmetrical SPDT RF Switch from 20 to 520 MHz

RF Switch  from Aethercomm

The SSHPS 0.020-0.520-400 from Aethercomm is a high power symmetrical SPDT RF switch that operates from 20 to 520 MHz. This switch has been designed to be integrated into communication and Electronic Warfare (EW) systems where high power, low loss, and excellent isolation are required. It can handle up to 400 watts of CW power and has a switching speed of 8 uSec.
Download Datasheet | Product Details
Sponsored by Signal Hound
Spike Software
New WLAN Modulation Analysis Mode Included in Spike Software
Signal Hound’s Spike spectrum analyzer software now includes specialized WLAN (Wi-Fi) modulation analysis features for IoT development, providing RF metrics for evaluating signal performance and quality – including demodulation of waveforms for viewing header signal information and modulation analysis quality down to the bit level. Click here to learn more.
 
Directional Coupler
10 dB Directional Coupler from 10 to 110 GHz

Directional Coupler  from KRYTAR

The 1100110010 from Krytar is a directional coupler that operates from 10 to 110 GHz. It has a coupling value of 10 dB with 1.8 dB variation over the band. The coupler has a directivity of over 7 dB and an insertion loss of less than 5.5 dB. It can handle up to 20 watts of power and has a VSWR of 2.5:1. The coupler is available in a module that measures 1.55 (L) x 0.38 (W) x 0.80 (H) inches with 1.0 mm female connectors.
Download Datasheet | Product Details
RF Transceiver
290 to 928 MHz Low Power Transceiver

RF Transceiver  from Semtech

The SX1209 is a highly integrated RF transceiver that operates from 290 MHz to 928 MHz. This ISM Band transceiver has an Rx sensitivity down to -120 dBm at 1.2 kbps and is optimized for low power consumption while offering high RF output power and channelized operation. All major RF communication parameters are programmable and most of them can be dynamically set.
Download Datasheet | Product Details
RF Transceiver
Low-power Digital Voice and Data Transceiver for 2.4 GHz Applications

RF Transceiver  from CML Microcircuits

The SCT2400 is a highly integrated digital radio transceiver based on spread spectrum modulation that operates in the 2.4 GHz ISM band. It is designed to provide secure digital voice and data communication channels over a long range (up to 12km line of sight) for systems operating in both licensed and unlicensed bands.
Download Datasheet | Product Details
Termination
15 W Coaxial RF Termination from DC to 3.8 GHz

Termination  from Hytem

The 02.02.65 from Hytem is a Termination that operates from DC to 3.8 GHz. This N-type male termination can handle up to 15 watts of power and has a VSWR of less than 1.30:1. The termination measures 70 x 36 x 43 mm and can operate from -55 to 125 degrees C.
Download Datasheet | Product Details
Digital Phase Shifter
Analog + Digital Phase Shifter from 24 to 28 GHz

Digital Phase Shifter  from RFIC Solutions

The RFICPS01 from RFIC Solutions is an analog + digital hybrid phase shifter that operates from 24 to 28 GHz. It can be used with front end modules for beam steering a phased array antenna system. This phase shifter has a low insertion loss of under 10 dB @ 26 GHz and provides full 360-degree phase shift coverage over the band. It is available as a die that measures 1.4 x 1.2 mm.
Download Datasheet | Product Details
Directional Coupler
6 dB Directional Coupler from 0.380 to 0.960 GHz

Directional Coupler  from MECA

The 715-6-0.670 from MECA is a directional coupler that operates from 0.380 to 0.960 GHz. Available with coupling value of 6 dB, this coupler has an insertion loss of 0.1 dB and directivity of over 20 dB. It can handle an average power of up to 10 watts and has a VSWR of 1.20:1.
Download Datasheet | Product Details
Sponsored by Signal Hound
 
 
 
Power Divider
2-Way Power Divider from 698 to 2700 MHz

Power Divider  from VidaRF

The VPD-0627N2 from VidaRF is a 2-Way Power Divider that operates from 698 to 2700 MHz supporting all wireless applications from cellular through UMTS. This power divider can handle up to 50 watts of power and has a low insertion loss of 0.5 dB and high isolation of over 22 dB. It has an excellent amplitude and phase balance. The power divider is available in a module with N-type female connectors.
Download Datasheet | Product Details
Power Divider
2-Way Power Divider from 0.5 to 18 GHz

Power Divider  from Werbel Microwave

The D-2185 from Werbel Microwave is a 2-way power divider that operates from 0.5 to 18 GHz. The divider has an insertion loss of less than 2.5 dB and an isolation of over 15 dB. It can handle up to 20 watts of power and has a good VSWR. The D-2185 is available in a module with SMA female connectors.
Download Datasheet | Product Details
Power Divider
3-Way Power Divider/Combiner from 0.9 to 1.6 GHz

Power Divider  from Mini Circuits

The SCG-3-162+ from Mini-Circuits is a 3-way power divider/combiner that operates from 0.9 to 1.6 GHz. It can handle up to 2 W of input power, has an insertion loss under 1.8 dB and isolation over 11.5 dB. This model is available in a surface mount ceramic package and is ideal for ISM and GPS applications.
Download Datasheet | Product Details
RF Switch
SP8T PIN Diode Reflective Switch from 6 to 12 GHz

RF Switch  from Panda Microwave

The SP8TR-060120S_A from Panda Microwave is an SP8T reflective PIN diode switch that operates from 6 to 12 GHz. It provides a low insertion loss of below 2.8 dB with the isolation of more than 80 dB and has a switching speed of less than 100 nsec. The switch can handle a power of up to 1 watt and has a VSWR of 1.5:1. It is available in a module that measures 105 x 38 x 10.2 mm with SMA female connectors.
Download Datasheet | Product Details
Base Station Antenna
8-Port Base Station Antenna from 617-896 and 1695-2690 MHz

Base Station Antenna  from Galtronics Corporation Ltd

The GP2408-06789 is a single-sector 8-Port MIMO antenna that operates from 617-896 MHz and 1695-2690 MHz covering 600 MHz/LTE/CELLULAR and AWS/PCS/WCS/BRS Bands. This 65° beamwidth dual-polarized antenna delivers a gain of up to 15.6 dBi and can handle an input power of 100 watts. It has a front-to-back ratio of less than 30 dB and port-to-port isolation of 20 dB.
Download Datasheet | Product Details
Wireless SoC
2.4 GHz Bluetooth Low Energy Wireless SoC

Wireless SoC  from NXP Semiconductors

The KW31Z from NXP Semiconductors is an ultra-low-power, highly-integrated SoC that enables Bluetooth low energy v4.2, Generic FSK (at 250, 500 and 1000 kbps) or IEEE Standard 802.15.4 RF connectivity for portable, extremely low-power embedded systems. This Wireless SoC integrates a 2.4 GHz transceiver supporting FSK/GFSK modulations, an Arm Cortex-M0+ CPU, up to 512 KB Flash and up to 128 KB SRAM.
Download Datasheet | Product Details
Antenna
Lightweight Helical GNSS Antenna for UAV Applications

Antenna  from Tallysman Wireless

The HC872 is a lightweight helical antenna covering the GPS L1/L2, GLONASS G1/G2, Galileo E1, and BeiDou B1 frequency bands, as well as L-band correction services coverage, is designed and crafted for precision positioning. It has a precision-tuned helix element that provides excellent axial ratios and operates without the requirement of a ground plane, making them ideal for a variety of high-precision Unmanned Aerial Vehicle (UAV) applications.
Download Datasheet | Product Details
RFID Tag
High-Temperature EPC Class 1 Gen 2 RFID Tag

RFID Tag  from The Tag Factory

The 390V1 (M-Cable tag) is an Alien Higgs 3 EPC Class 1 Gen 2 RFID tag that operates from 865 to 868 MHz. It is a high temperature tag that can operate from -40°C to +85°C & is specially designed for applications like boiler and engine identification. This tag has a very good read range, especially when attached to the metal. It measures 28 x 15 x 5 mm.
Download Datasheet | Product Details
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.