1. everything RF
  2. RF Newsletters
more
PREV 28th Aug, 2019 NEXT

New RF & Microwave Products this Week

28 Aug, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 28 Aug, 2019
 
Sponsored by Mouser
 
 
 
New RF & Microwave Products this Week
RF Amplifier
4.5 W GaN Power Amplifier from 8.5 to 11 GHz

RF Amplifier  from Qorvo

The QPA1022 from Qorvo is a GaN on SiC broadband power amplifier that operates from 8.5 to 11 GHz. It provides more than 4 watts of saturated output power, a power gain of 24.5 dB, and a power added efficiency of 45%. This amplifier requires 22 volts of power supply and is matched to 50 Ohms with integrated DC blocking capacitors at RF output and DC grounded input port.
Download Datasheet | Product Details
RF Switch
SP12T Switch from 8 to 12 GHz

RF Switch  from Daico Industries

The CSWX6322 from DAICO is an SP12T RF switch that operates from 8 to 12 GHz. It has an insertion loss of 4 dB and an isolation of 70 dB. The switch can handle up to 35 dBm of input power and is available in a connectorized module.
Download Datasheet | Product Details
RF Amplifier
1 kW Radar Pallet Amplifier from 2.7 to 2.9 GHz

RF Amplifier  from RFTR Electronics

The RAP2729P60 from RFTR Electronics is a Radar Pallet Amplifier that operates from 2.7 to 2.9 GHz. This solid state class AB amplifier provides an output power of 1000 W (300 μs pulse width and 10% duty cycle) with a gain of 10.5 dB and an efficiency of over 55%. It requires a supply of 50 V and has a switching speed of up to 50 nsec. The amplifier is available in a module that measures 145.7 x 70 mm and is available with SMA female connectors.
Download Datasheet | Product Details
Voltage Controlled Oscillator
GaAs PHEMT MMIC VCO from 23.5 to 24.8 GHz

Voltage Controlled Oscillator  from Arralis

The LE-Ka1310301 is a Voltage Controlled Oscillator that operates from 23.5 to 24.8 GHz. It requires a 3V supply voltage and has a tuning voltage from 0 to 1.6 V. The VCO provides 15 dBm of output power. It is ideal for high-speed data, communications, IoT and space communications applications.
Download Datasheet | Product Details
Tunable Filter
16 to 32 GHz Tunable Band-Pass Filter

Tunable Filter  from Analog Devices

The ADMV8432 is a tunable MMIC band-pass filter with a passband from 16 to 32 GHz. The filter has a 3 dB bandwidth of more than 17% of the center frequency. The center frequency (fc) of the filter can be varied between 16.5 GHz and 29.5 GHz by applying an analog tuning voltage between 0 V to 15 V. It provides a rejection of more than 30 dB above and below the band.
Download Datasheet | Product Details
Directional Coupler
Thin Film Directional Coupler from 0.7 to 2.7 GHz

Directional Coupler  from AVX Corporation

The CP0402W2700FNTR from AVX is a thin film directional coupler that operates from 0.7 to 2.7 GHz. This 24 dB coupler has a directivity of 20 dB and an insertion loss of less than 0.3 dB. It can handle 3 watts of continuous RF power. The coupler is available in a 1 x 0.58 x 0.35 mm land grid array (LGA) package and is ideal for Mobile communications, Satellite TV receivers, GPS, Vehicle location systems, and Wireless LAN’s applications.
Download Datasheet | Product Details
RF Amplifier
150 W Solid State Power Amplifier from 10 kHz to 100 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 150A100D from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled, broadband amplifier that operates from 10 kHz to 100 MHz. The device is designed for applications where instantaneous bandwidth, high gain, and linearity are required. When used with a sweep generator, it provides more than 150 watts of RF power with a gain of over 51.8 dB.
Download Datasheet | Product Details
Sponsored by Mouser
2W GaN Amplifier
Mouser Offers 2W GaN Amplifier for Defense Applications.
Covering 2 to 20GHz, Qorvo QPA2213/QPA2213D Wideband Driver Amplifiers provide > 2W of saturated output power and 16dB of large-signal gain while achieving > 23% power-added efficiency. Click here to learn more.
 
RF Amplifier
8 kW Solid State Pulse Amplifier from 2 to 4 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2136-2-4-8KP from Exodus is a solid-state high power pulse amplifier that operates from 2 to 4 GHz. This class AB linear GaN amplifier delivers a peak output power of up to 8 kW@ 10% duty cycle, with a gain of over 69 dB. It is available in a rack-mounted unit (2 x 4 kW pulse drawers rack integrated) with N-type and 7/16 (F) connectors.
Download Datasheet | Product Details
RF Amplifier
C-Band Bidirectional Amplifier Module from 4.4 to 4.9 GHz

RF Amplifier  from NuWaves Engineering

The NW-BA-C-15-RX01 from NuWaves is a C-Band Bi-directional Amplifier module that operates from 4.4 to 4.9 GHz. It is ideal for extending the communication range of half-duplex transceivers with constant-envelope waveforms (i.e. PSK and FSK-based modulations, such as SOQPSK and GFSK), and delivers an RF transmit power of 15 Watts.
Download Datasheet | Product Details
Noise Source
10 MHz to 26.5 GHz USB Smart Noise Source

Noise Source  from Keysight Technologies

The U1831C from Keysight is a USB-powered smart noise source designed to measure DUT noise figures up to 30 dB from 10 MHz to 26.5 GHz. The noise source has a low reflection coefficient and a nominal ENR value of 15 dB. The USB connection significantly reduces setup time and provides compatibility with noise figure analyzers and signal analyzers.
Download Datasheet | Product Details
RF & Microwave Isolator
20 dB Isolator from 27 to 31 GHz

RF & Microwave Isolator  from DiTom Microwave

The D3I2731Q from DiTom Microwave is an isolator that operates from 27 to 31 GHz. It has an insertion loss of less than 0.6 dB and an isolation of more than 20 dB. The isolator can handle up to 5 W of average power and 30 W of peak power. This isolator is available in a module with 2.4 mm (F) connectors.
Download Datasheet | Product Details
Termination
50 W Low PIM Termination from 0.38 to 2.7 GHz

Termination  from MECA

The LPTC50-4310F from MECA is a coaxial termination that operates from 0.38 to 2.7 GHz. It can handle up to 50 W of average power and peak power of up to 5 kW. This termination is matched to 50 Ohms and has a VSWR of 1.25:1. It is available in a module with a 4.3/10 female connector.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-3170 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that attenuates standing waves and reflections, providing an isolation of more than 120 dB @ 3 GHz. The enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
Block Up Converter
50 dBm GaN BUC for X-band Military & Satellite Applications

Block Up Converter  from ACORDE

The ACTX-X100W-E1-V2 from Acorde is a medium power GaN Block-Up Converter (BUC) that converts an Input frequency from 950 to 1450 MHz to an output frequency from 7.9 to 8.4 GHz. This BUC has been designed for X-band professional & military satellite communication systems (ground, SOTP, SOTM, maritime, etc.).
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
Directional Coupler
16 dB Coupler from 5 to 1800 MHz for CATV Systems

Directional Coupler  from MiniRF

The MRFCP6762 from MiniRF is a 75 Ohm coupler that operates from 5 to 1800 MHz. This 16 dB coupler has a directivity of 13 dB, an isolation of 30 dB, and an insertion loss of less than 1.4 dB. It has a return loss of 20 dB and can handle up to 2 watts of input power. The coupler is available in an SMT package and is ideal for CATV/ broadband and wireless communications applications.
Download Datasheet | Product Details
RFID Tag
RFID Inlay for Dense Retail & Apparel Applications

RFID Tag  from Alien Technology

The ALN-9825 from Alien Technology is an RFID dry/wet inlay that has been designed for high volume retail, apparel and supply chain management. This UFH band (860 - 960 MHz) RFID Inlay is based on the Higgs™-EC UHF RFID IC. The ALN-9825 inlays are World Tag compliant, enabling consistent operation across the diverse set of frequencies used in the Americas, Europe, Middle East, Asia, and Africa.
Download Datasheet | Product Details
Beamforming IC
Front-End Beamformer MMIC for 5G and SATCOM Applications

Beamforming IC  from SoC Microwave

The 5GICFE01 from SoC Microwave is a 24 to 30 GHz highly integrated Front-End Beamformer MMIC for 5G and SATCOM phased array antenna systems. The chip covers full 360 degrees of phase variation with minimum amplitude variation for beam steering. It provides 28 dB of small signal gain with an output power of 20 dBm and output third order intercept of 34 dBm while transmitting.
Download Datasheet | Product Details
OCXO
10 MHz High Stability Miniature OCXO

OCXO  from Morion, Inc.

The MV333M from Morion is a high stability miniature OCXO that operates at 10 MHz. The OCXO has a short term stability (Allan Deviation) of up to 5 x 10-13 and phase noise of up to -170 dBc/Hz at 10 kHz offset. It requires a supply voltage of 12 V and provides a sinewave output.
Download Datasheet | Product Details
RF Switch
SP4T Internally Terminated PIN Switch from 3 to 7 GHz

RF Switch  from Sirius Microwave

The SW4-3000-7000 from Sirius Microwave is a SP4T internally terminated PIN switch that operates from 3 to 7 GHz. This absorptive switch has insertion loss of less than 2.8 dB, isolation of over 90 dB and switching speed of under 200 nsec. It can handle up to 18 dBm of input power and requires a +5/-5 V Supply. It is available in a connectorized module.
Download Datasheet | Product Details
Waveguide Mixer
40 to 60 GHz GaAs U-Band Mixer for Radar & Test Equipment Applications

Waveguide Mixer  from SAGE Millimeter

The SFB-40360311-1919SF-N1-M is a GaAs MMIC U-band balanced mixer with a LO/RF frequency from 40 to 60 GHz and an IF frequency from DC to 14 GHz. The mixer has a LO pumping power of 15 dBm and a conversion loss of 11 dB. It has LO to RF isolation of 30 dB, LO to IF isolation of 15 dB, and RF to IF isolation of 20 dB.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest industry news, information on new product releases, upcoming events, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]