1. everything RF
  2. RF Newsletters
more
PREV 2nd Sept, 2019 NEXT

Latest News & White Papers this Week

2 Sept, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 2 Sept, 2019
 
Sponsored by PCB Directory
 
 
 
Latest News this Week
R&S to Exhibit Wide Range of RF & Microwave Test Solutions at EuMW 2019 - Rohde & Schwarz
40 Gbps E-Band Wirelss Link Provides Connectivity of 11 Km - ELVA
NGMN Recommends a Common RF Cluster Connector for 5G Deployments - NGMN Alliance
Researchers Use Wi-Fi to Track Movement in Indoor Environments - North Carolina State University
5G Wireless Network Infrastructure Revenue to Double Over the Next Year - Gartner
FCC Probes Apple and Samsung for Emitting RF Radiations above Allowed Limits - Chicago Tribune
New RF Front-End Solutions Improve Range of Bluetooth Modules for IoT - Skyworks Solutions
Link Microtek Develops Complex Microwave Feed Assembly for Mobile Satcom Antenna System - Link Microtek
A Tiny Long-Range Wireless Charging Solution for IIoT Sensors - ANSYS
Switched Multi-Beam Portion of 5G Smart Antenna Market to Reach $3.1 Billion by 2024 - ResearchAndMarkets
Minimize Drone Threats with this Counter-UAS Solution - Rohde & Schwarz
MEGA Introduces New 16-Way Coaxial Gysel Combiner - Mega Industries
More News
New White Papers & Articles
Choosing or Specifying an RF Switch Matrix - I.F. Engineering
Ferrimagnetic Substrates for Microwave Integrated Circuits - Skyworks Solutions
Bluetooth and Antenna Matching - AVX Corporation
RF Board Connector: Footprint Optimization The Key To Maximize Your Performance - Huber+Suhner
Simulating Performance of a Low Cost, Chipless RFID System - Remcom
More White Papers
Upcoming Event
Event Image
DSEI 2019
Date: 10 to 13 September, 2019
Location: ExCeL, London
More Events
Featured Products this Week
Frequency Multiplier
6X Active Frequency Multiplier from 60 to 90 GHz

Frequency Multiplier  from Farran Technology

The FXA-12-0003 from Farran Technology is a 6x active frequency multiplier that up-converts an input frequency from 10 to 15 GHz to an output frequency from 60 to 90 GHz. It can handle input power up to 8 dBm and delivers an output power of more than 7 dBm. The multiplier requires a supply voltage of 5.5 to 8 VDC while consuming 800 mA of current and has a harmonic suppression of -20 dBc.
Download Datasheet | Product Details
RF Switch
SP8T Absorptive Switch from 0.1 to 20 GHz

RF Switch  from Amplical Corporation

The SW8A004 from Amplical Corporation is an SP8T ultra-broadband PIN diode switch that operates from 0.1 to 20 GHz with TTL control. This coaxial absorptive switch has an insertion loss of less than 4.8 dB, a port to port isolation of over 65 dB, and a switching speed of 100 nsec. It can handle up to 0.5 W of input power and requires 5 volts of DC supply.
Download Datasheet | Product Details
Signal Generator
Automotive Radar Echo Generator

Signal Generator  from Rohde & Schwarz

The R&S AREG100A automotive radar echo generator reliably tests radar sensors in the 24 GHz ISM band and in the E band at 77 GHz or 79 GHz. It simulates echoes of up to four artificial target objects at fixed distances. User-configurable Doppler offsets can optionally be applied to simulate the radial movement of the objects.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port USB Vector Network Analyzer, 100 kHz to 9 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The C1209 is a vector network analyzer that operates from 100 kHz to 9 GHz. It has a dynamic range of 148 dB and can be operated with any Windows PC or laptop. The VNA efficiently handles advanced test applications, and with dimension of 14.8 x 8.3 x 3.7 in. (377 x 210 x 95 mm) and weighs under 10.5 lbs. (4.8 kg). The C1209 takes up about half a rack (in width) making it optimal for engineers looking for fast production without requiring a lot of space.
Download Datasheet | Product Details
Vector Network Analyzer Extender
325 to 500 GHz Waveguide VNA Frequency Extender

Vector Network Analyzer Extender  from OML Inc.

The V02.2VNA2 series from OML are Vector Network Analyzer Extenders that upconvert an input frequency from 10.8 to 16.7 GHz to an output frequency of 325 to 500 GHz. These VNA extenders have a dynamic range of over 40 dB and directivity of 25 dB that displays highly accurate and stable two-port S-parameters: S11, S21, S12, and S22.
Download Datasheet | Product Details
RF Transistor
450 W RF GaN on SiC HEMT from 3.6 to 3.7 GHz

RF Transistor  from Wolfspeed, A Cree Company

The GTRA374902FC-V1 from Wolfspeed is a GaN on SiC HEMT that operates from 3600 to 3700 MHz. It provides a peak output power of 450 watts with a gain of 11.5 dB and efficiency of 60% while operating 3700 MHz from a 48V supply. This Pulsed device has a pulse width of 10 µs and a duty cycle of 10%.
Download Datasheet | Product Details
RF Amplifier
Cryogenic Amplifier from 18 to 40 GHz for R&D Applications

RF Amplifier  from B&Z Technology

The BZ1840CR1 from B&Z Technology is a cryogenic amplifier that operates from 18 to 40 GHz. It provides a gain of over 27 dB with a noise figure of less than 1.4 dB. The amplifier requires a 5V supply and draws 60 mA of current. It is available in a module with connectors and is ideal for research and scientific applications.
Download Datasheet | Product Details
Microwave Generator
100 W, 2.4 GHz Software Controlled Microwave Generator and Amplifier

Microwave Generator  from Emblation Microwave

The ISYSconnect from Emblation Microwave is a Software Controlled Microwave Generator and Amplifier that is capable of generating variable power over 100 W at 2.45 GHz with superior reflection measurement capability and temperature stability. The output power can be varied in 5 Watt increments from 0-100W using pulse width modulation (PWM) techniques with power stability maintained within 5% of the set value.
Download Datasheet | Product Details
RF Variable Attenuator
64 dB Digital Attenuator from 2 to 18 GHz

RF Variable Attenuator  from G.T. Microwave, Inc.

The A6P-69N-0MG from GT Microwave is a multi-octave digitally controlled attenuator that operates from 2 to 18 GHz with an 8-bit binary TTL control logic. This PIN diode attenuator can provide attenuation from 0 to 64 dB in 0.25 dB steps. It has an insertion loss of less than 4.5 dB, a switching speed of 1.5us, and can handle 1 W of input power. The attenuator is available in a module that measures 1.7 x 1.8 x 0.75 inches.
Download Datasheet | Product Details
GNSS Module
Compact GNSS Module with an Integrated Antenna

GNSS Module  from ftech Corporation

The FMP3306 is a compact GPS + GLONASS Module with an integrated smart antenna. The module has a tracking sensitivity of -165 dBm and consumes 26 mA of current in acquisition mode and 20 mA of current in tracking mode. It is based on the MediaTek Single Chip Architecture (MT3333) and has 99 acquisition channels and 33 simultaneous tracking channels.
Download Datasheet | Product Details
Antenna
0.30 to 10 GHz Omni-Directional Antenna for IED Countermeasure Applications

Antenna  from Cobham Antenna Systems

The OA2-0.3-10.0V/1668 from Cobham is a high power Omni-directional antenna designed for security and IED Countermeasure applications. This vertically polarized antenna operates from 0.30 to 10 GHz and delivers a gain of over 2 dBi across the band. It provides an approximate beam-width of 360° (Az) x 65° (El) and can handle an input power of up to 100 watts.
Download Datasheet | Product Details
TCXO
1 to 200 MHz TCXO Clock Oscillator

TCXO  from HM International

The SP2CT from HM International is a TCXO Clock Oscillator with an oscillation frequency from 1 to 200 MHz. This TCXO requires a 3.3 V, 5 V supply voltage and provides a CMOS Output waveform with the stability of up to 3 ppm versus temperature. It has a phase noise of less than -135 dBc/Hz @ 1 kHz.
Download Datasheet | Product Details
Analog Phase Shifter
0 to 180 Degrees Analog Phase Shifter from 1 to 4 GHz

Analog Phase Shifter  from Planar Monolithics Industries

The PS-1G4G-180-A-SFF from PMI is an Analog Phase Shifter that operates from 1 to 4 GHz. It has 0 to 180 degrees phase-shifting range and a control voltage of +11V / -11V. The phase shifter is available in a module that measures 5 x 3 x 0.9 inches with SMA female connectors.
Download Datasheet | Product Details
RFID Tag
Low Cost RFID/NFC Dry Inlay Tag

RFID Tag  from Identive

The I00XXXN39025 from IDENTIV is a low-cost RFID tag that has been developed using NXP's near field communication (NFC) IC NTAG210µ. This RFID tag is a dry inlay that is 25 mm in diameter. It is compatible with any Android or Apple iOS 11 and up NFC-enabled device, the inlay is ideal for enabling NFC use cases including Internet of Things (IoT) and customer engagement applications.
Download Datasheet | Product Details
RF Probe
Dual Probe for Characterization of Multiport and Differential RF ICs

RF Probe  from MPI Corporation

The Dual T67 from MPI Corporation is an RF Probe that operates from DC to 67 GHz. It is available with a pitch range from 100 microns to 500 microns in GSGSG and GSSG probe tip configurations. This probe is ideal for characterization of multiport and differential front-ends, integrated circuits and components of commercial wireless, radar and defense applications.
Download Datasheet | Product Details
Sponsored by PCB Directory
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, interviews, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]