|
RF & Microwave industry updates. View it in your browser
|
Sponsored by PCB Directory |
|
|
| |
| New RF & Microwave Products this Week |
|
| 700 W LDMOS Transistor for Avionics Applications |
RF Transistor
from Ampleon
|
| The BLA9H0912L-700 from Ampleon is an LDMOS power transistor that operates from 0.96 to 1.21 GHz. It provides an output power of 700 W with a power gain of 20 dB and a drain efficiency of 62%. This transistor requires a 50 V power supply. It has integrated dual-sided ESD protection that enables excellent off-state isolation. The transistor is available in a ceramic flanged package and is ideal for avionics applications. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 2.4 GHz Front-End Module for Bluetooth IoT Applications |
Front End Module
from Skyworks Solutions
|
| The SKY66118-11 is a high-performance, fully integrated RF front-end module (FEM) designed for Bluetooth, Zigbee, and Thread applications. The device integrates a 20 dBm power amplifier, RF switches, output matching, and harmonic filtering. The FEM supports three modes of operation, using simple 2-pin GPIO control. The low transmit current consumption and operation over a wide supply range enable the FEM to be used with a direct battery connection, supporting a wide range of battery discharge voltages. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 5.5 to 19 GHz GaAs Mixer for Radar and T&M Applications |
RF Mixer
from MACOM
|
| The MAMX-011035 from MACOM is a GaAs double balanced passive diode mixer with a LO/RF frequency from 5.5 to 19 GHz and an IF frequency from DC to 6 GHz. The mixer has an IP3 of 20 dBm, and a conversion loss of 6 dB. It has LO to RF isolation of 34 dB, LO to IF isolation of over 28 dB, and RF to IF isolation of over 10 dB. This mixer is available in a lead-free 3 mm, 12-lead QFN package. It is ideal for applications such as test and measurement, microwave radios, and radars. |
|
Download Datasheet |
Product Details
|
|
|
|
|
Sponsored by PCB Directory |
|
|
| |
|
| Low Noise Amplifier from 24 to 43.5 GHz |
RF Amplifier
from Mini Circuits
|
| The ZVA-24443G1+ from Mini-Circuits is a coaxial, low noise amplifier that operates from 24 to 43.5 GHz. The amplifier is capable of providing high gain of over 45 dB with extremely low noise of 1.7 dB and an RF power of 100mW (+20 dBm). It operates over a single positive supply range of +9 to +15 V. The amplifier is available in a module with 2.92mm female connectors and is ideal for 5G, Q-band Satcom, test and Instrumentation applications. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 6 to 20 GHz GaAs LNA for AESA Radar Applications |
RF Amplifier
from arQana Technologies
|
| The ALA4603-QA from arQana Technologies is a GaAs low noise amplifier MMIC that operates from 6 to 20 GHz. It provides an output power of 10 dBm with a gain of 22 dB, and a noise figure of 2.5 dB. This amplifier requires a supply voltage of 5 V and is available in a 4 x 4 mm surface mount QFN package. It is ideal for AESA-Radars, Point-to-point Communications, Satellite Communications, Multi-Band VSAT, and Repeaters / Boosters / DAS applications. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Low Noise Gain Block Amplifier from 10 to 2500 MHz |
RF Amplifier
from AmpliTech
|
| The APTMP3-00010250-2015-D9 from Amplitech is a low noise gain block amplifier that operates from 10 to 2500 MHz. The amplifier provides an output power of 22 dBm with a gain of 25 dB and a noise figure of 0.75 dB. The amplifier is available in multiple configurations with different supply voltages +3V/5V/10V/12V/15V. It is available in TO-8 package or SMT package or Connectorized module or can even be customized based on a users requirement. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 2.3 to 2.69 GHz LNA for LTE Receiver Applications |
RF Amplifier
from NXP Semiconductors
|
| The BGS8H2 from NXP is a low noise amplifier with a bypass switch for LTE receiver applications that operates from 2.3 to 2.69 GHz. If the received signal strength is sufficient, the LNA can be switched off and the device can operate in bypass mode at a 1 mA current. This type of product is ideal for low power operation. This amplifier has a P1dB of 1.5 dBm and a system-optimized gain of 12.5 dB for both primary and diversity applications. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| NB-IoT Wireless Module for 5G Applications |
Cellular Module
from Gemalto
|
| The ENS22 from Gemalto is an NB-IoT wireless module that supports 3GPP Release 14 and delivers Five Band LTE (3, 5, 8, 20, and 28) connectivity with deep indoor coverage and extended the range in rural areas. The module delivers data speeds up to 27 Kbit/s downlink and 63 Kbit/s uplink, making it ideal for long life data-only applications like utility meters and smart city solutions. |
|
Download Datasheet |
Product Details
|
|
|
|
| | About everything RF | | everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new products, white papers, articles, interviews, upcoming events and much more. |
|
| To unsubscribe please click here | [Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip] |
|
