PREV 16th Sept, 2019 NEXT

Latest News & White Papers this Week

16 Sept, 2019 - everything RF Newsletter

RF & Microwave industry updates.

 
Date: 16 Sept, 2019
 
Sponsored by Coilcraft
 
 
 
Latest News this Week
SEAKR to Provide Advanced RF Signal Processor for Northrop Satellites - Northrop Grumman
IMS 2020 is Now Open for Paper Submissions! - IEEE MTT-S
Analyze Spectrum from 8 kHz to 8 GHz Using this Portable Monitoring Receiver - Rohde & Schwarz
Qualcomm Introduces mm-Wave Antenna Module for its Snapdragon 5G Chipset - Qualcomm
Real-time RF Emulator Simulates Channel Interactions among 256 Wireless Devices - DARPA
60 GHz WiGig Chipset for Fixed Wireless and Small Cell Applications - Peraso Technologies
UMS to Highlight its Latest Advancements in GaN Process Technology at EuMW - United Monolithic Semiconductors
NXP to Showcase its Latest RF & Microwave Products at EuMW 2019 - NXP Semiconductors
Facebook's All-in-One VR Gaming System Uses Skyworks Wi-Fi FEM - Skyworks Solutions
Vapor-Sealed Microwave/RF Cable Assemblies for Airborne Environments - W. L. Gore & Associates
dB Control Acquires EW Solutions Expert, TTT-Cubed - dB Control
u-blox has sold over 500 Million GNSS Receivers - u-blox AG
RFS Deploys the Highest Power Broadcast Antennas in China - Radio Frequency Systems
More News
New White Papers & Articles
How to Avoid Common Manufacturing Problems in PCBs Before They Occur - Sunstone Circuits
Low-Cost EMI Pre-compliance Testing Using a Spectrum Analyzer - Tektronix, Inc.
How GaN is Changing the Satcom RF Front-End - Qorvo
A User Guide to Simplifying LTE-M/NB-IoT Design Projects - Laird Connectivity
Advanced Antenna Systems for 5G - 5G Americas
More White Papers
Upcoming Event
Event Image
EuMW 2019
Date: 29 September to 4 October, 2019
Location: Minneapolis, MN, United States
More Events
Sponsored by Coilcraft
Q/Tight Tolerance Air Core Inductors
Q/Tight Tolerance Air Core Inductors – Free Samples!
Coilcraft’s tight tolerance “spring” inductors combine the exceptionally high Q of an air-wound coil with the convenience of surface mounting. Offered in a wide variety of sizes & configurations with Q factors as high as 230 and current ratings up to 5.7 amps. Free samples available!
 
Featured Products this Week
RF Transceiver
Highly Integrated Transmitter Subsystem Tunable from 75 MHz to 6 GHz

RF Transceiver  from Analog Devices

The ADRV9008-2 is a highly integrated, RF transmitter sub-system that is tunable over a range of 75 MHz to 6 GHz. The IC has a bandwidth of 450 MHz and consists of integrated dual channel transmitters, an observation path receiver, integrated synthesizers, and digital signal processing functions.
Download Datasheet | Product Details
Power Divider
2-Way Power Divider from 0.35 to 6 GHz

Power Divider  from JFW Industries

The 50PD-846 from JFW is a 2-way power divider that operates from 0.35 to 6 GHz. It has an insertion loss of less than 0.9 dB, isolation of over 15 dB, and can handle up to 10 watts of input power. This divider uses a reactive Wilkinson splitter design which is ideal when the application is to fan-in or fan-out RF signals with minimum loss. It is available in a module with SMA (F) coaxial connectors.
Download Datasheet | Product Details
RF Amplifier
3.1 to 3.5 GHz Low Noise Amplifier for Space & Radar Applications

RF Amplifier  from AmpliTech

The APT3-03100350-0708-D4-H1 from AmpliTech is an ultra-low noise amplifier that operates from 3.1 to 3.5 GHz. This S-band LNA provides a P1dB of 9.3 dBm with a gain of over 28 dB, and a noise figure of less than 0.7 dB. The amplifier requires 11 to 16 volts of power supply and is reverse voltage protected.
Download Datasheet | Product Details
Microwave Generator
915 MHz Microwave Generator with 50 kW Output Power

Microwave Generator  from Muegge GMBH

The MG050KG-510KY is a Microwave Generator for industrial heating and plasma technology applications operating at 915 MHz. It delivers a CW output power of up to 50 kW. This device can be restarted and jump to full power in only 65 ms in case of any interruptions. It is available in a cabinet that measures 1200 x 2200 x 800 mm and has over charge, over current protection, idling, overload and short circuit protection.
Download Datasheet | Product Details
SATCOM Amplifier System
400 W Satellite Uplink Amplifier for the Ku Band

SATCOM Amplifier System  from Rohde & Schwarz

The PKU100 from Rohde & Schwarz is a solid-state power amplifier for the Ku band with a peak power of 400 W and peak efficiency of over 20%. This amplifier combines the advantages of solid-state and tube-based amplifiers. It features optional adaptive linearization at the RF level to provide a previously unattainable spectral purity.
Download Datasheet | Product Details
USB Power Sensor
1 MHz to 26 GHz True RMS Power Sensor

USB Power Sensor  from LadyBug Technologies

The LB5926A from LadyBug Technologies is a high accuracy, platform-independent True-RMS Power Sensor that operates up to 26 GHz. This general-purpose power meter can measure average power, True RMS and conduct scalar measurements. The sensor uses a highly accurate, thermally stabilized, two path, RMS responding, square law diode detection scheme.
Download Datasheet | Product Details
RF Spectrum Analyzer
Real-Time Modular Benchtop Spectrum Analyzer from 9 kHz to 20 GHz

RF Spectrum Analyzer  from Aaronia AG

The Spectran V5 Real Time Spectrum Analyzer from Aaronia is available as a benchtop device in four frequency configurations: 9 kHz to 6 GHz, 12 GHz, 16 GHz and 20 GHz. This analyzer has a real time analysis bandwidth that varies from 44 MHz in the 6 GHz model to 175 MHz in the 20 GHz model. The analyzer has a very fast sweep time that enables it to scan 20 GHz of spectrum in less than 20 ms.
Download Datasheet | Product Details
Automotive Radar Chipset
24 GHz Automotive Radar Transceiver MMIC

Automotive Radar Chipset  from Infineon Technologies

The BGT24ATR11 is a SiGe MMIC transceiver for signal generation and reception, operating in the 24 GHz ISM band from 24 to 24.25 GHz. The Tx side of the transceiver has a 24 GHz VXO and delivers 11 dBm of signal power to the antenna. It has an auxiliary LO output that is available to provide LO signal to separate receiver components.
Download Datasheet | Product Details
Frequency Synthesizer
450 MHz to 18.25 GHz Synthesizer with 10 MHz steps

Frequency Synthesizer  from Cobham Signal & Control Solutions

The 435-36105 from Cobham is a Frequency Synthesizer that operates from 450 MHz to 18.25 GHz with 10 MHz steps. This device provides a switching speed of 250 µs from any start frequency to any stop frequency in the full range and has a parallel control interface to facilitate pipelined hopping. The spurious content is -55 dBc from 450 MHz to 12 GHz and -50 dBc from 12 to 18.25 GHz.
Download Datasheet | Product Details
GPS/GNSS  Disciplined Oscillator
Miniature GPS Disciplined Oscillator

GPS/GNSS Disciplined Oscillator  from Brandywine Communications

The miniature GPS Disciplined Oscillator from Brandywine Communications is a combination of a GPS receiver and a high stability oscillator. This GPSDO supplies a low noise, precision 10 MHz frequency reference signal output. It is available in a surface mount package that measures 2 x 2 x 1 mm.
Download Datasheet | Product Details
Base Station Antenna
45 Degree Sector Antenna from 4.9 to 5.9 GHz

Base Station Antenna  from KP Performance Antennas

The KP-5SX4-45 from KP Performance Antennas is a 4-port base station antenna that operates from 4.9 to 5.9 GHz. This 45° tilted antenna delivers a gain of 20.5 dBi and can handle up to 50 watts of power per port. It has a maximum port to port isolation of 35 dB and a Front-to-Back Ratio of more than 38 dB. This antenna suppresses side-lobes and back-lobes for mitigating inter-sector interference.
Download Datasheet | Product Details
SATCOM Amplifier System
C-band Solid State Power Amplifier from 5.850 to 6.725 GHz

SATCOM Amplifier System  from General Dynamics SATCOM Technologies

The DPCM6450N from General Dynamics is a SATCOM Amplifier System that provides an output power of 450 watts across the standard 5.850 to 6.425 GHz or extended 5.850 to 6.725 GHz satellite uplink bands. It provides a maximum gain of up to 75 dB with 20 dB digital gain adjustment.The SSPA incorporates a modular architecture that includes the RF modules, power supplies, logic, fans, and front panel assembly.
Download Datasheet | Product Details
RF Module
Bluetooth 5.0 Module for IoT Applications

RF Module  from Silicon Labs

The Bluetooth Xpress BGX13S from Silicon Labs is a Bluetooth 5 SiP module that delivers a serial-to-Bluetooth 5 solution that requires no wireless firmware development for applications. It has integrated antenna, RF certifications, built-in cloud connectivity for secure updates through the Xpress framework for iOS and Android development.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Low Noise VCO from 27 to 40 GHz

Voltage Controlled Oscillator  from NI Microwave Components

The VTO-33500-40L from NI Microwave Components is a Voltage Controlled Oscillator which can be tuned to a frequency from 27 to 40 GHz. It has a tuning voltage from 4 to 22 V. This VCO provides a phase noise as low as -83 dBc/Hz at a 100 kHz offset while operating on a supply of 5.5 VDC. It delivers an output power of 18 dBm into a 50 ohm load.
Download Datasheet | Product Details
Limiter
20 MHz to 8 GHz Two Stage Passive Limiter Module

Limiter  from RFuW Engineering

The RFLM-200802MA-299 from RFuW Engineering is a Two Stage Passive Limiter module that operates from 20 MHz to 8 GHz. This module provides passive receiver protection (always on) against average powers of up to 45 dBm and peak powers of up to 51 dBm pulsed (pulse width = 1 usec, duty cycle = 0.1%), while maintaining a low flat leakage of less than 20 dBm, and reduced Spike Leakage of less than 0.2 ergs.
Download Datasheet | Product Details
RF Switch
SP4T and SP6T Electromechanical Switches from DC to 40 GHz

RF Switch  from Radiall

The R512 series from Radiall are SP4T and SP6T Electromechanical Switches that operate from DC to 40 GHz. They have an isolation of over 55 dB, switching speed of less than 15 ms and can handle an input power of up to 1 W while operating from a 24 VDC supply. The switches are available in a module with SMA/2.9mm connectors and are suitable for automated test & measurement equipment, and signal monitoring devices.
Download Datasheet | Product Details
Sponsored by Coilcraft
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, interviews, articles and much more.