1. everything RF
  2. RF Newsletters
more
PREV 18 Sept, 2019 NEXT

New RF & Microwave Products this Week

18 Sept, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 18 Sept, 2019
 
Sponsored by Signal Hound
 
 
 
New RF and Microwave Products this Week
Band Pass Filter
BAW Band Pass Filter from 3.78 to 3.88 GHz

Band Pass Filter  from Akoustis

The AKF-1938 is a 3.78 to 3.88 GHz BAW RF filter designed for radar and RF transceiver applications. It has a low insertion loss covering 100 MHz of bandwidth with a high rejection of 35 to 55 dB. The filter is available in an ultra-small module that measures 2 x 2.5 x 0.9 mm and operates over a temperature range from -40 C to +105 C.
Download Datasheet | Product Details
RF Variable Attenuator
USB Programmable Attenuator from 10 MHz to 13 GHz

RF Variable Attenuator  from Vaunix

The LDA-133 Digital Attenuator from Vaunix is a bidirectional, 50 Ohm step attenuator that operates from 10 MHz to 13 GHz. It has a step size of 0.5 dB and 63 dB of control range with reliable and repeatable solid state digital attenuation. This lab brick can handle up to 2 Watts of input power.
Download Datasheet | Product Details
RF Amplifier
75 Ohm CATV Push-Pull Amplifier from 45 to 1218 MHz

RF Amplifier  from Qorvo

The QPA8801 from Qorvo is an ultra-linear GaAs amplifier MMIC that provides over 11 dB of gain at 1218 MHz. Operating from 45 to 1218 MHz, this IC provides an output power of 27.5 dBm and is ideal for use in CATV distribution systems requiring high output power capability. This amplifier requires 12 volts of power supply and consumes less than 4.56 W of power.
Download Datasheet | Product Details
RF Amplifier
High Gain Broadband Amplifier from 1.7 to 2.2 GHz

RF Amplifier  from Integrated Device Technology

The F1421 from IDT is a high gain broadband RF amplifier that operates from 1.7 to 2.2 GHz. This amplifier provides 23 dBm of output power with a gain of 20.3 dB, and a noise figure of 5.5 dB at 1.9 GHz. It requires a 5 V supply and draws 138 mA of current. This device is packaged in a 4 x 4 mm, 24-QFN package.
Download Datasheet | Product Details
Front End Module
Dual-Band (2.4 GHz and 5 GHz) 802.11ac Front-End Module

Front End Module  from Skyworks Solutions

The SKY85813-11 from Skyworks is a Dual-Band (2.4 GHz and 5 GHz) 802.11ac Front-End Module. This FEM integrates a 5 GHz SPDT transmit/receive switch, low-noise amplifier with bypass, and power amplifier. It also contains a 2 GHz coexistence filter, diplexer, and dual-band coupler. The SKY85813-11 provides 17 dBm of output power and a gain of 26 dB on the Tx side. On the receive side, it provides a gain of 10 dB.
Download Datasheet | Product Details
RF Switch
High Power SPDT Switch from 20 to 1000 MHz

RF Switch  from Aethercomm

The SSHPS 0.020-1.000-200 from Aethercomm is a symmetrical SPDT RF switch that operates from 20 to 1000 MHz. It has an insertion loss of less than 0.75 dB, isolation of over 25 dB and a switching speed of 8 usec. The switch can handle up to 200 watts of CW power and operates from a +28 Vdc supply drawing up to 500 mA of current.
Download Datasheet | Product Details
RF Amplifier
2000 W Solid State Pulsed Amplifier from 0.8 to 2.5 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 2000SP0z8G2z5 from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled, broadband amplifier designed for pulse applications with low duty factors where instantaneous bandwidth and high gain are required. Operating from 0.8 to 2.5 GHz, it provides more than 2000 W of peak pulse power with a gain of over 63 dB.
Download Datasheet | Product Details
Sponsored by Signal Hound
VSG60A
Signal Hound’s New VSG60A
An agile streaming vector signal generator capable of frequencies up to 6 GHz. Featuring a low-phase noise local oscillator with 200 µs switch time, ideal for frequency-hopping spread spectrum testing. Capable of continuously streaming waveforms of any size – including arbitrary I/Q sample rates from 12.5 kSPS to 51.2 MSPS – An unrivaled value at $2350! Click here for more info.
 
RF Amplifier
Broadband L & S-band LNA from 1 to 3 GHz

RF Amplifier  from NuWaves Engineering

The HILNA LS from NuWaves is a broadband L & S-band low noise amplifier that operates from 1 to 3 GHz. It delivers 50 dB of gain with a noise figure of less than 2 dB and OIP3 of +33 dBm. The HILNA LS is also usable from 500 MHz to 3.75 GHz with 40 dB of gain. The amplifier requires a supply voltage of 5 to 15 V.
Download Datasheet | Product Details
RF Amplifier
C-Band Super Low Noise Amplifier with Fault Detection

RF Amplifier  from AmpliTech

The APT3-05400590-1010-LS-D4-FAC is a Low Noise amplifier that operates from 5.4 to 5.9 GHz. It provides a P1dB of 12 dBm and a gain of 28 dB with a noise figure of less than 0.9 dB. An internal limiter at the input provides protection of up to 2W CW of RF input power over the full band.
Download Datasheet | Product Details
RF Mixer
Ku-Band MMIC Double Balanced Mixer from 2 to 22 GHz

RF Mixer  from Marki Microwave

The MM1-0222H from Marki Microwave is a double balanced mixer with an RF/LO frequency from 2 to 22 GHz and an IF frequency from DC to 3.5 GHz. This Ku-band GaAs MMIC mixer works well as both an up and down converter. It has a conversion loss of 8.5 dB, high LO to RF isolation of 51 dB, and a high input IP3 of 20 dBm across the bandwidth.
Download Datasheet | Product Details
Directional Coupler
Wideband Directional Coupler from 20 to 40 GHz

Directional Coupler  from Knowles

The FPC07181 from Knowles is a Wideband Directional Coupler that operates from 20 to 40 GHz. It has a coupling value of 18.5 to 21.5 dB, an insertion loss of less than 0.3 dB and directivity of over 14 dB. The coupler is available in a surface-mount package that measures 1.651 x 1.27 x 0.254 mm and is available in Symmetrical and Asymmetrical versions.
Download Datasheet | Product Details
Directional Coupler
20 dB Directional Coupler from 1 to 12 GHz

Directional Coupler  from UMCC

The DC-R000-20S from UMCC is a broadband directional coupler that operates from 1 to 12 GHz. This 20 dB coupler provides a directivity of over 13 dB and an insertion loss of less than 0.7 dB. It can handle more than 50 watts of average input power and peak power of 1 kW. This coupler is available in a module with SMA (F) connectors.
Download Datasheet | Product Details
Between Series RF Adapter
TNC Female to N Male Between-Series Adapter up to 18 GHz

Between Series RF Adapter  from Spectrum Elektrotechnik GmbH

The 8058-4151-02 from Spectrum Elektrotechnik GmbH is a TNC female (jack) to N male (plug) Between-Series Coaxial Adapter that operates up to 18 GHz. The adapter uses a special heat dissipating dielectric between the center conductor and outer conductor and has cooling fins to dissipate power to the environment.
Download Datasheet | Product Details
RF Connector
1.0 mm (110 GHz) Edge Launch Connectors

RF Connector  from Signal Microwave

The ELF110 series from Signal Microwave are 1.0mm Edge Launch Connectors for the Digital Industry operating up to 110 GHz. These 50 Ohm connectors can handle a minimum of 500 mating cycles.
Download Datasheet | Product Details
Sponsored by Signal Hound
 
 
 
RF Shielded Test Enclosure
Benchtop RF Shield Box from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-S860 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. The enclosure has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
RF Switch
SPDT Pin Diode Switch from 24 to 45 GHz

RF Switch  from Altum RF

The ARF2000Q2 from Altum RF is an SPDT Pin Diode Switch designed for millimeter-wave 5G network applications operating from 24 to 45 GHz. This switch has an insertion loss of 1.5 dB and an isolation of over 25 dB. It can handle up to 1 W of input power and has a control voltage from 3.3 to 15 volts. The switch is internally matched to 50 Ohms with ESD protection.
Download Datasheet | Product Details
Power Divider
4-Way Power Divider from 0.698 to 2.7 GHz

Power Divider  from VidaRF

The VPD-0627A4 from VidaRF is a 4 Way Power Divider that operates from 0.698 to 2.7 GHz. This power divider can handle up to 30 watts of power and has a low insertion loss of 1.2 dB and high isolation of over 20 dB. It has a low amplitude balance of 0.3 dB and phase balance of 5 degrees. The power divider is available in a module with SMA female connectors.
Download Datasheet | Product Details
RF Module
Long Range Bluetooth 5.1 / THREAD / ANT+ / NFC Module with MCU and Antenna

RF Module  from Insight SiP

The ISP1907 is an RF module with a built-in antenna designed for classic IoT applications, which use the Bluetooth 5.1 standard for Long-Range Communication and Direction-Finding connectivity. It is based on the Nordic nRF52811 2.4 GHz wireless System on a Chip (SoC) with an integrated 2.4 GHz transceiver, a 32-bit ARM Cortex™-M4, with 192 kB flash memory, and 24 kB SRAM and analog and digital peripherals.
Download Datasheet | Product Details
Antenna
Surface Mount Monopole Antenna for LTE-M and NB-IoT Applications

Antenna  from Linx Technologies

The Splatch SP610 is a surface-mount monopole antenna for embedded LTE (700 MHz bands) and cellular IoT (LTE-M and NB-IoT) applications. This omnidirectional antenna provides a peak gain of 5.1 dBi with an efficiency of more than 60% and can handle an input power of up to 10 watts.
Download Datasheet | Product Details
Antenna
Flexible Arm Omnidirectional Antenna for MANET and MIMO Radios

Antenna  from Octane Wireless

The MG-2200-4900 from Octane Wireless is S & C-band Mini-Gooseneck antenna optimized for MANET and MIMO Radios. This vertically polarized omnidirectional antenna operates from 2.2 to 2.3 / 4.4 to 4.9 GHz and provides a gain up to 6 dBi. It can handle an input power of up to 0.5 watts. The antenna measures 5.1 x 0.56 inches and is available with different mounting options with SMA (M) connectors.
Download Datasheet | Product Details
RFID Tag
Versatile On Metal UHF RFID Tag

RFID Tag  from Confidex Ltd

The Confidex Silverline Micro is an EPC Global Class1 Gen2 passive UHF RFID tag that operates from 865 to 928 MHz (FCC & ETSI). It is a versatile On Metal RFID label for securing IT and enterprise assets, valuable items or tools. This RFID tag has a read range of up to 1.2 m on metal and up to 1 m on plastic.
Download Datasheet | Product Details
PIM Analyzer
Battery Operated Portable PIM Analyzer Series

PIM Analyzer  from Kaelus

The iPA Series of PIM analyzer from Kaelus are battery operated versatile PIM Test Analyzers that can be used in a number of test scenarios. These IEC compliant 40 Watt, rugged testers include a tablet computer in a ruggedized case for remote control. The series have a transmit range from 728 MHz to 2690 MHz and a receive range from 689 MHz to 2570 MHz (Multiple frequency configurations available).
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news stories, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]