1. everything RF
  2. RF Newsletters
more
PREV 16th Oct, 2019 NEXT

New RF & Microwave Products this Week

16 Oct, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 16 Oct, 2019
 
Sponsored by Signal Hound
 
 
 
New RF & Microwave Products this Week
Tunable Filter
Digitally Tunable Band Pass Filter from 3 to 4 GHz

Tunable Filter  from Wainwright Instruments

The WTBCF5-3000-4000-40-100-40M series from Wainwright Instruments are digitally tunable band pass filters with a 40 MHz passband. The center frequency (Fo) can be tuned by the customer to be between 3000 and 4000 MHz to match 5G NR DL Band n78 (3300-3800 MHz) and other applications.
Download Datasheet | Product Details
RF Amplifier
DC Coupled Low Noise Amplifier from DC to 8 GHz

RF Amplifier  from Atlanta Micro

The AM1164-1 from Atlanta Micro is a high dynamic range DC-coupled low noise amplifier that operates from DC to 8 GHz. It provides a P1dB of 20 dBm with a gain of 21 dB and a noise figure of 1.5 dB. The amplifier has an OIP3 of 33 dBm and requires a DC supply voltage from 3.3 to 5 V. It is available in a 16-lead 3mm QFN or 6-lead 1.3 x 2 mm DFN package.
Download Datasheet | Product Details
RF Switch
Radiation Tolerant SPDT Switch from 9 kHz to 60 GHz

RF Switch  from Teledyne e2v HiRel Electronics

The TDSW0602T from Teledyne e2v HiRel is a silicon-on-insulator (SOI) reflective SPDT switch that operates from 9 kHz to 60 GHz. It has an insertion loss of less than 3.8 dB and a port to port isolation of over 36 dB. The switch has an IIP3 of 48 dBm and a maximum switching time of 12 ns.
Download Datasheet | Product Details
RF Test Set
Test System for Infotainment with FM/DAB Handover Emulator

RF Test Set  from Becker Nachrichtentechnik GmbH

The TSI-6X32H is a broadcast distribution infrastructure solution for large infotainment integration and verification laboratories. Connected to a set of up to 6 FM/DAB generators, the system can provide up to 32 outputs which can be supplied with a composite RF signal that is individually composed of a programmable mix of the generator signals.
Download Datasheet | Product Details
RF Test Set
Customizable All-in-One RF Test System up to 20 GHz

RF Test Set  from Elite RF

The S-Series Pro from Elite RF is an All-in-One RF Test System that operates up to 20 GHz. The test setup can be customized to contain a range of test equipment including a Real-Time Spectrum Analyzer, Vector Network Analyzer, Signal Generator, RF Power Meter and other devices.
Download Datasheet | Product Details
RF Module
Bluetooth 5.0 Module with Integrated Patch Antenna

RF Module  from TAIYO YUDEN

The EYSKBNZWB from Taiyo Yuden is a Bluetooth 5.0 low energy module that supports data rates of up to 2 Mbps (2M / 1M / 500k / 125kbps). This module operates from 2402 to 2480 MHz and provides an output power of up to 8 dBm. It is based on an ARM® Cortex M4F 32-bit processor with 1 MB flash and 256 KB RAM.
Download Datasheet | Product Details
RF Amplifier
7 W Solid-State Power Amplifier from 1 to 2.5 GHz

RF Amplifier  from NuWaves Engineering

The NW-PA-LS-5-MI01 from NuWaves is a Micro L & S-Band Solid-State Power Amplifier that operates from 1 to 2.5 GHz. It provides a saturated output power of 7 watts and a gain of over 41 dB with an efficiency of 35 %. This amplifier requires a supply voltage of 26 to 30 VDC and consumes less than 1.25 A of current.
Download Datasheet | Product Details
RF Amplifier
GaN Doherty Hybrid Amplifier from 2515 to 2685 MHz

RF Amplifier  from RFHIC

The RPM26008-30H from RFHIC Corporation is a 2-stage Doherty GaN hybrid power amplifier that operates from 2515 to 2685 MHz. It provides a saturated output power of 56.2 W with a power gain of 32 dB and an efficiency of 46%. This RoHS-compliant amplifier is available in a plastic SMD package that measures 13 x 17 x 2.2 mm and is ideal for 5G Massive MIMO systems, small cells, and low power remote radio head applications.
Download Datasheet | Product Details
RF Amplifier
20 W Power Amplifier from 2 to 6 GHz

RF Amplifier  from RFcore

The RCA2060H45A from RFCore is a High-Power Amplifier that operates from 2 to 6 GHz. It delivers a saturated output power of more than 20 W with a large signal gain of 47 dB while operating on a DC supply of 28 V. The PA is available in a module that measures 136 x 110 x 25 mm with SMA female connectors.
Download Datasheet | Product Details
RF Transistor
1930 to 1995 MHz LDMOS Transistor for Base Station Applications

RF Transistor  from Ampleon

The BLC10G19XS-600AVT from Ampleon is an LDMOS Doherty power transistor that operates from 1930 to 1995 MHz. It delivers peak power exceeding 600W with a Doherty gain of 15.5 dB and a drain efficiency above 48%. Integration of internal video decoupling minimizes memory effects, providing excellent digital pre-distortion capability.
Download Datasheet | Product Details
Multiplexer
Downlink Multiplexer for 5G NR Frequency Bands 12/5/2/4/30

Multiplexer  from Anatech Electronics

The AE737-882-1960-2132-2355MP1020 from Anatech Electronics is a 5-Channel Downlink Multiplexer for 5G NR frequency bands 12/5/2/4/30 (729 to 2630 MHz). The multiplexer has an insertion loss of below 1 dB and provides more than 80 dB of attenuation above and below the bands. It can handle an input power of up to 100 watts.
Download Datasheet | Product Details
RF Switch
SP16T Absorptive Switch from 0.1 to 50 GHz

RF Switch  from Planar Monolithics Industries

The P16T-100M50G-100-T-DEC from Planar Monolithics is an SP16T absorptive switch that operates from 0.1 to 50 GHz with TTL control. It has an insertion loss of under 18 dB, isolation of over 70 dB, and a switching speed of 100 nsec. The switch can handle CW input power of up to 20 dBm and requires a 12 V DC supply.
Download Datasheet | Product Details
RF Switch
SP16T Solid State Switch from 0.5 to 40 GHz

RF Switch  from American Microwave Corporation

The MSNK-16DR/DT-05 from American Microwave Corporation is a solid-state SP16T switch that operates from 0.5 to 40 GHz. The switch has an insertion loss of less than 14 dB and isolation of more than 60 dB. It can handle up to 20 dBm of CW power and has an ON/ OFF speed of up to 100ns. The switch requires a supply voltage of -5 / 5 V and is available in a module with 2.92 mm female connectors
Download Datasheet | Product Details
RF Variable Attenuator
Voltage Controlled PIN Attenuator from 40 to 4000 MHz

RF Variable Attenuator  from UMCC

The AG-4040-30V from Universal Microwave is a Voltage Controlled PIN Attenuator that operates from 40 to 4000 MHz. It has an attenuation range from 0 to 30 dB with 10 dB steps (10 dB/V of control voltage) and an insertion loss of less than 2.6 dB. The attenuator can handle up to 17 dBm of input power (30 dBm survival) and requires a 12 to 15 VDC power supply.
Download Datasheet | Product Details
RF Amplifier
10 W Solid-State Power Amplifier from 10 kHz to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 10U1000 from AR RF/Microwave Instrumentation is a portable, self-contained, air-cooled, solid-state power amplifier that operates from 10 kHz to 1000 MHz. It delivers over 10 watts of CW output power and has a gain of more than 40 dB with a noise figure of 8 dB.
Download Datasheet | Product Details
Sponsored by Signal Hound
Signal Hound
A Headless RF Spectrum Analyzer Unrivaled In Value
Signal Hounds latest spectrum analyzer, the 20 GHz SM200B, now offers 160 MHz instantaneous bandwidth (IBW) I/Q capture, accessible via an API. The SM200B still has the dynamic range, phase noise, 1 THz/s sweeps, and 100 kHz to 20 GHz range that made the SM200A popular, but now features 2-seconds of segmented I/Q capture memory with triggering options such as frequency mask triggering (FMT) to satisfy the ever-increasing analysis bandwidth demands of the wireless industry. Available now for $12,300.
 
RF Amplifier
4000 W Pulsed Solid State Power Amplifier for X-Band Radars

RF Amplifier  from Comtech PST

The BHCDP938988-4000 from Comtech PST is a GaN solid-state power amplifier that operates from 9.3 to 9.8 GHz in the X-band. This Class AB amplifier delivers a pulsed peak output power of up to 4000 W with a gain of 66 dB and requires a 50 VDC supply.
Download Datasheet | Product Details
RF Amplifier
125 W GaN Power Amplifier from 500 to 2500 MHz

RF Amplifier  from Empower RF

The SKU 1211 from Empower RF is a solid-state broadband Class AB high power amplifier that operates from 500 to 2500 MHz. It provides a saturated output power of 125 W with a gain of 64 dB. The amplifier is suitable for broadband mobile jamming and high power linear applications in the L and S bands.
Download Datasheet | Product Details
RF Transceiver
Quad-Channel RF Transceiver with Dual Feedback Paths 600 MHz to 6 GHz

RF Transceiver  from Texas Instruments

The AFE7769 is a Quad-channel RF transceiver that operates from 600 MHz to 6 GHz. This multichannel transceiver integrates four direct up-conversion transmitter chains, four direct down-conversion receiver chains, and two wideband RF sampling digitizing auxiliary chains (feedback paths).
Download Datasheet | Product Details
RF Capacitor
High Q, Low ESR Chip Capacitors from 1 to 100 pF

RF Capacitor  from Passive Plus Inc

The 0708N series from Passive Plus are Low ESR RF Capacitors with capacitance values from 1 to 100 pF. The capacitors have a high Q of more than 2000 at 1 MHz and a working voltage (WVDC) of 500 V. The dielectric can withstand a voltage of up to 250% of working voltage for 5 seconds.
Download Datasheet | Product Details
RF Inductor
Broadband Conical Flying Lead Inductors from 1.47 to 10.47 µH

RF Inductor  from Gowanda

The C182FL Series from Gowanda are Conical Flying Lead Inductors available in five inductance values ranging from 1.47 to 10.7 µH. The inductors have a DCR up to 7.10 Ohm and can handle an input current of 694 mA DC. These RoHS components meet the = 0.1% lead requirement and are compatible with soldering processes up to 260°C.
Download Datasheet | Product Details
RF Amplifier
100 W Power Amplifier from 2 to 6 GHz

RF Amplifier  from Inspower

The INS3072 from Inspower is a high-power, class AB solid state amplifier that operates from 2000 to 6000 MHz. It provides a saturated output power of 100 Watt with a gain of 50 dB. The amplifier requires a 28 V supply voltage and consumes 22 A of current (@100 W output). It has harmonics of -20 dBc and spurious of -70 dBc.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-3170 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that attenuates standing waves and reflections, providing an isolation of more than 120 dB @ 3 GHz. The enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
Antenna
High Performance Parabolic Antenna from 71 to 86 GHz

Antenna  from mWAVE Industries

The HRP Series from mWAVE Industries are High Performance Parabolic Antennas that operate from 71 to 86 GHz. These linearly polarized antennas provide a gain of 45 dBi and a half power beamwidth (HPBW) of 0.8 degrees across the band. The antennas have good radiation efficiency and a return loss of 15.6 dB.
Download Datasheet | Product Details
Sponsored by Signal Hound
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]