1. everything RF
  2. RF Newsletters
more
PREV 21st Oct, 2019 NEXT

Latest News & White Papers this Week

21 Oct, 2019 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
Date: 21 Oct, 2019
 
Sponsored by ANSYS
 
 
 
Featured products this Week
RF Variable Attenuator
Bi-directional Computer Controlled Step Attenuator from 50 MHz to 18 GHz

RF Variable Attenuator  from Vaunix

The LDA-5018V from Vaunix is a highly accurate, bi-directional, 50 Ohm digital attenuator that operates from 50 MHz to 18 GHz (S to KU-band). It has a 50 dB attenuation range with a step size of 0.1 dB and an attenuation accuracy of 1 dB. This lab brick can handle up to 23 dBm of input power.
Download Datasheet | Product Details
Cellular Module
Low Power Module with Integrated LTE-M/NB-IoT Modem and GPS

Cellular Module  from Nordic Semiconductor

The nRF9160 is a low power System-in-Package with integrated LTE-M/NB-IoT modem and GPS. The module has 1 MB of Flash plus 256 kB of RAM on-board memory with a broad range peripheral set, analog and digital interfaces, 32 GPIOs, a stand-alone modem with full LTE capability, plus a multiband RF front-end.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
50 W, 90-Degree Hybrid Coupler from 700 to 6000 MHz

90 Degree Hybrid Coupler  from Innovative Power Products

The IPP-2316 from Innovative Power Products is a 90 Degree Hybrid Coupler that operates from 700 to 6000 MHz. It can handle up to 50 Watts of average power and has a VSWR of over 1.35:1. The coupler has an insertion loss of less than 1 dB and an isolation of more than 15 dB.
Download Datasheet | Product Details
Limiter
1 W Power Limiters from 0.01 to 18 GHz

Limiter  from Herotek

The LL series from Herotek are Power Limiters that operate from 10 MHz to 18 GHz. They can handle up to 1 Watt of input CW power and 100 Watts of peak power with a low flat leakage of less than 5 dBm. The Limiters have a low insertion loss of less than 4 dB and a VSWR of up to 2.0:1.
Download Datasheet | Product Details
RF Switch
Terminated SPDT Switch from DC to 50 GHz

RF Switch  from RLC Electronics

The STR-2-H-50 from RLC Electronics is an SPDT coaxial switch that operates from DC to 50 GHz. It has an insertion loss of less than 1.1 dB, isolation of over 50 dB, and a switching speed of up to 25 nsec. The switch is available in a module with 2.4mm (F) connectors. This failsafe switch is available with an internal 2 W termination that can be replaced by connectors for special applications.
Download Datasheet | Product Details
SAR Measurement System
SAR Measurement & Certification System

SAR Measurement System  from Microwave Vision Group

The COMOSAR Measurement Systems from SATIMO performs both compliance SAR measurements for certification and rapid SAR measurements for R&D development phases at frequencies from 30 MHz to 6 GHz. They are available in three configurations: with one, two or four phantom tables.
Download Datasheet | Product Details
RF Amplifier
C-Band GaN 1.1 kW Pulsed Solid State PA Module

RF Amplifier  from Communications & Power Industries

The VSC3644 from CPI is a GaN Solid State Power Amplifier Module that operates from 5.2 to 5.9 GHz in the C-band. This air-cooled amplifier delivers a saturated peak output pulsed power of more than 1.1 kW (1 to 100 µsec, 10% duty cycle) with a gain of 46 dB and an efficiency of 24%.
Download Datasheet | Product Details
RF Amplifier
1000 W Solid-state High-power Amplifier from 10 kHz to 100 MHz

RF Amplifier  from Exodus Advanced Communications

The AMP2080E-1 from Exodus Advanced Communications is a solid-state high-power amplifier that operates from 10 kHz to 100 MHz. This class A/AB linear amplifier provides over 1000 Watts of saturated power (700 W P1dB) with a power gain of over 60 dB. Suitable for all single channel modulation standards, this LDMOS amplifier has built-in protection circuits.
Download Datasheet | Product Details
RF Amplifier
2 to 18 GHz High Gain Limiting Amplifier

RF Amplifier  from AmpliTech

The APT55-02001800-7016-66-LMS from AmpliTech is a Limiting Amplifier that operates from 2 to 18 GHz. It provides an output power of 20 dBm and gain of 80 dB with a noise figure of under 4 dB. The input signals can be as large as +10 dBm. It is available in a drop-in package with SMA female connectors and is ideal for radar systems and EW/ECM communication system applications.
Download Datasheet | Product Details
Directional Coupler
10 dB Directional Coupler from 18 to 40 GHz

Directional Coupler  from MECA

The 765-10-29.000 from MECA is a 5G ready millimeter-wave coupler that operates from 18 to 40 GHz. Available with a coupling value of 10 dB, this coupler has an insertion loss of 1.3 dB and directivity of over 12 dB. It can handle an average power of up to 20 watts and has a VSWR of 1.80:1. The 765-10-29.000 is available in a module with 2.92mm female connectors.
Download Datasheet | Product Details
RF Cable Assembly
VNA Test Cable Assemblies from DC to 67 GHz

RF Cable Assembly  from Arance Electronics

The NAC Series from Arance are Precision Cable Assemblies specially designed for vector network analyzer (VNA) test applications. Operating from DC to 67 GHz, these cable assemblies exhibit excellent phase and amplitude stability, achieving highly reliable test results under rough lab testing environments.
Download Datasheet | Product Details
Frequency Synthesizer
SMT PLL Frequency Synthesizer from 3100 to 4100 MHz

Frequency Synthesizer  from Synergy Microwave Corporation

The FCPH310410-10 from Synergy Microwave is a PLL frequency synthesizer that operates from 3100 to 4100 MHz. The synthesized signal has a low phase noise of -92 dBc/Hz @ 10 kHz and -98 dBc/Hz at 100 kHz offset with 10 MHz input reference. The synthesizer provides an output power of over 5 dBm and has a power up time of 90 msec.
Download Datasheet | Product Details
RF Amplifier
2.025 to 2.400 GHz LNAs for Earth Station Receiver Applications

RF Amplifier  from Advantech Wireless

The ALNA-S Series of Low Noise Amplifiers operate from 2.025 to 2.400 GHz in the S-band. These low noise, high dynamic range amplifiers are suitable for use in satellite earth station receiver applications where ultra-low noise and high reliability are critical. The LNAs provide a gain of over 50 dB with an output power of more than 10 dBm and Noise Temperature ranging from 50° K to 70° K.
Download Datasheet | Product Details
RF Module
Dual Mode Multi-Protocol Wireless Solution for V2X Communications

RF Module  from Redpine Signals

The WaveCombo Module (Part No. WCMBA1-NBZ-D0P) from Redpine signals is a multi-protocol wireless module that supports 802.11a/b/g/n, 802.11p, dual-mode Bluetooth and 802.15.4/Zigbee. The module can be used in either 802.11p mode or 802.11n/Bluetooth/802.15.4 mode with an application layer switching between the two modes.
Download Datasheet | Product Details
Signal Generator
4-Channel DDS Signal Generator from DC to 171 MHz

Signal Generator  from Novatech Instruments

The Model 409B from Novatech is a 4-Channel Direct Digital Synthesized (DDS) Signal Generator. It generates four independent, phase synchronous sine wave output signals and is programmable in 0.1 Hz steps from 0.1 Hz to 171 MHz. The frequencies of the four outputs can be independently set and can be offset from each other by 14-bits (0.02 degrees) of programmable phase.
Download Datasheet | Product Details
Sponsored by ANSYS
ANSYS
Introducing ANSYS Motor-CAD
New product! ANSYS Motor-CAD combines the leading electric motor design software tool with multiphysics analysis capabilities to extend simulation into the design phase of the electric machine product lifecycle. Register for the webinar to learn more and see a live demo.
 
Microwave Backhaul Radio Links
2.3 Gbps, 60 GHz Point to Multi-Point Radio System

Microwave Backhaul Radio Links  from Siklu

The MultiHaul Series radios from Siklu are 60 GHz Point to MultiPoint multi-gigabit radios that leverages narrow beams to ensure interference-free and secure communication, connecting up to 8 terminal units at a range of up to 400 meters. This plug & play system provides 2.3 Gbps over the air capacity (1.8 Gbps net throughput) to rooftops or street fixtures.
Download Datasheet | Product Details
Microwave Absorber
Lossy Foam RF Absorbers from 1 to 18 GHz

Microwave Absorber  from MAST Technologies

The MF22-0003-00 from MAST Technologies are Lossy Foam Absorbers that operate from 1 to 18 GHz. These RF absorbers are designed with a constant coating to exhibit high reflection loss and are intended to be applied to metal surfaces inside microwave cavities, housings, radomes, network enclosures, or antennas.
Download Datasheet | Product Details
Sponsored by ANSYS
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]