1. everything RF
  2. RF Newsletters
more
PREV 17 Feb, 2020 NEXT

Latest News & White Papers this Week

17 Feb, 2020 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 17 Feb, 2020
 
Sponsored by KP Performance Antennas
 
 
 
Latest News this Week
MWC 2020 Cancelled Due to Coronavirus - MWC
DARPA to Develop Integrated Mixed-Mode RF Electronics Using Advanced CMOS Technology - DARPA
R&S Introduces 5G Site Testing Solution for Installation and Troubleshooting - Rohde & Schwarz
Skyworks Developing Wi-Fi 6E Chipsets for 5.925 - 7.125 GHz Band - Skyworks Solutions
R&S Introduces Test Solution for Wi-Fi 6 Access Points - Rohde & Schwarz
Multi-Channel RF Spectrum Record and Playback System for RADAR and EW Applications - Giga-tronics
Cadence Accelerates Innovation in 5G RF Communications by Acquiring Integrand - Cadence Design Systems
Researchers Develop World’s Smallest All-Digital PLL - Tokyo Institute of Technology
Small and Light E-band Transceiver Module for 5G Backhaul Applications - Filtronic
Ultra-Thin Active Electronically Steered Antenna Arrays for In-Flight Connectivity - Mitsubishi Electric US, Inc.
China Will Use Over 70% of the Industry's 5G RF Transceivers in 2020 - Mobile Experts Inc
Nokia, Softbank Conduct World’s First 5G Connected Car Test - Nokia
TMD Technologies Invests in GaN Amplifier Specialist Diamond Microwave - Diamond Microwave
More News
New White Papers & Articles
Mobile Filter Innovation is Alive and Well in Extending the Reach of 4G - Resonant Inc
5G NR Base Station OTA Receiver Tests - Rohde & Schwarz
Advances in mm-Wave Isolator Design Launch Manufacturers into Stratospheric Operating Frequencies - Micro Harmonics
Passive Intermodulation and Power Handling for High Power RF MEMS Switches - Menlo Micro
Key Drivers and Research Challenges for 6G Ubiquitous Wireless Intelligence - 6G Flagship, University of Oulu
More White Papers
Upcoming Event
Event Image
CMSE 2020
Date: 21 to 23 April, 2020
Location: Los Angeles, CA
More Events
Sponsored by KP Performance Antennas
 
 
 
Featured Products this Week
RF Test Set
Functional Radio Communication Tester up to 6 GHz

RF Test Set  from Rohde & Schwarz

The R&S CMW290 is an IoT radio communication tester that simultaneous supports all common wireless communications standards – cellular and non-cellular up to 6 GHz on up to two channels. It is a lean solution that has been optimized for typical hardware verification tasks and basic mobile network emulation.
Download Datasheet | Product Details
RF Spectrum Analyzer
Multi-touch Signal Analyzer from 10 Hz to 26.5 GHz

RF Spectrum Analyzer  from Keysight Technologies

The N9010B MXA Signal Analyzer operates from 10 Hz to 26.5 GHz with a 160 MHz analysis bandwidth. The analyzer has a DANL of -166 dBm, phase noise of less than -114 dBc/Hz at 10 kHz offset and a dynamic range 3rd order of over 116 dB. It shortens test times with hardware-accelerated power measurements and has a multi-touch display.
Download Datasheet | Product Details
Frequency Synthesizer
Programmable Frequency Synthesizers from 50 MHz to 12 GHz

Frequency Synthesizer  from EM Research

The HFS Series from EM Research are Programmable Frequency Synthesizers that operate from 50 MHz to 12 GHz (In-bands). The synthesizers provide an output power of up to 14 dBm and require an external reference from 5 to 200 MHz. The synthesized signal has a low phase noise with harmonics less than -20 dBc and spurious less than -60 dBc.
Download Datasheet | Product Details
Frequency Synthesizer
Low Noise Synthesizers from 100 MHz to 110 GHz

Frequency Synthesizer  from MI-WAVE

The 957 Series from MI-WAVE are Phase Locked Oscillators that use fixed frequency low noise synthesizer technology to provide an output from 100 MHz to 110 GHz. These oscillators use an external reference from 1 to 600 MHz to provide a signal with a low phase noise of -100 dBc @100 kHz, harmonics of -30 dBc and spurious of -60 dBc.
Download Datasheet | Product Details
Digital Phase Shifter
6-bit GaAs Phase Shifter Die from 2 to 4 GHz

Digital Phase Shifter  from VIPER RF

The VRFC0008-BD from Viper RF is a 6-bit GaAs phase shifter die that operates from 2 to 4 GHz and provides 360 degrees of phase coverage with a 5.625 degree phase step. The phase shifter has an insertion loss of under 7.5 dB and an RMS phase error of 3.3 degrees (at 3 GHz). The RF ports are DC blocked and matched to 50 Ohms.
Download Datasheet | Product Details
Antenna
3D RF Tracking Antenna from 400 MHz to 8 GHz

Antenna  from Aaronia AG

The IsoLOG 3D 160 from Aaronia AG is a 3D RF Tracking Antenna that operates from 400 MHz to 8 GHz. This antenna module consists of 16 sectors with 32 antennas and has a tracking accuracy of 1 to 3 degrees. This is the perfect solution for counter-surveillance measurements or drone-detection-systems (unmanned air vehicle).
Download Datasheet | Product Details
Power Sensor
Real-Time Peak USB Power Sensors from 50 MHz to 40 GHz

Power Sensor  from Boonton

The RTP5000 Series of USB Power Sensors from Boonton are Real-Time peak power sensors that operate from 50 MHz to 40 GHz. They have a dynamic range from -60 dBm to +20 dBm with a measurement rate of 100,000 measurements per second, with no gaps in signal acquisition and zero measurement latency. These USB power sensors have high video bandwidth and fast rise times.
Download Datasheet | Product Details
Vector Network Analyzer Extender
F-Band Frequency Extender from 90 to 140 GHz

Vector Network Analyzer Extender  from Farran Technology

The FES-08 from Farran Technology is an F-Band Frequency Extender Source that up-converts an input frequency from 7.5 - 11.7 GHz to an output frequency from 90 - 140 GHz.The frequency extender supports FM/PM and pulse modulations and can handle 5 dBm of input power. This extender requires a supply voltage of 12 V.
Download Datasheet | Product Details
Base Station Antenna
Choke Ring GNSS Antenna for Reference Stations

Base Station Antenna  from Orban Microwave

This antenna from Orban Microwave is a Choke Ring Antenna that supports GPS L1/L2/L5, Galileo L1/E5/E6 and Glonass frequency bands. The antenna can also be customized to provide additional L-band/SBAS frequency coverage. It has an integrated LNA that provides a standard gain of 50 dB.
Download Datasheet | Product Details
Wireless Charging Transmitter
Highly Integrated WattUp Wireless Power Transmitter

Wireless Charging Transmitter  from Dialog Semiconductor

The DA4100 from Dialog Semiconductor is a highly integrated RF transmitter System-on-Chip designed to provide optimal charging of WattUp receiver devices. It consists of the RF transmitter, power management and integrated DC-DC to power Dialog’s external Bluetooth® Low Energy ICs, delivering a complete WattUp transmitter system solution.
Download Datasheet | Product Details
Wireless Charging Receiver
15 W PMA/Qi Complaint Wireless Power Receiver IC

Wireless Charging Receiver  from ROHM Semiconductor

The BD57015GWL from ROHM Semiconductor is a 15 W PMA/Qi compliant stand-alone wireless power receiver IC. It supports Qi-standard V1.2 and PMA standard SR1. The device integrates a fully synchronous rectifier circuit with low-impedance FETs, Qi-compliant and PMA compliant packet controller, has an adjustable regulated voltage output, and an open-drain output terminal to communicate with the power transmitter.
Download Datasheet | Product Details
RF Switch
SPDT PIN Diode Absorptive Switch from 100 MHz to 20 GHz

RF Switch  from Amplical Corporation

The SW2A101 from Amplical is an SPDT PIN Diode Absorptive Switch that operates from 100 MHz to 20 GHz. This Coaxial switch can handle an input CW power of up to 2 watts, has an insertion loss of less than 3.8 dB, isolation of more than 70 dB, and a switching speed of up to 75 ns. It is ideal for use in communications systems, electronic simulators, bypass/selector switch, radar systems, EW systems, and test equipment applications.
Download Datasheet | Product Details
V2X Module
Automotive Grade C-V2X Module

V2X Module  from Quectel

The AG15 from Quectel is an automotive-grade C-V2X module based on Qualcomm's 9150 C-V2X chipset. It is designed to allow low-latency, highly reliable and highly dense data exchange between vehicles and their surroundings, enabling effective information sharing among road users in avoidance of collisions, thus improving automotive safety, automated driving and traffic efficiency.
Download Datasheet | Product Details
Frequency Divider
Divide-by-4 Frequency Divider with 10 to 26 GHz Input

Frequency Divider  from Lotus Communication Systems

The FD410G26G from Lotus Communication is divide-by-4 active Frequency Divider with an input frequency from 10 to 26 GHz. The divider can handle an input signal with power ranging from -15 to 10 dBm to provide an output signal with -4 dBm of power. It is based on GaAs HBT technology and has low additive SSB phase noise performance.
Download Datasheet | Product Details
Cellular Module
LTE Cat NB1/NB2 Module for 5G Massive IoT Applications

Cellular Module  from Sequans Communications

The Monarch NB02S is an LTE Cat NB1/NB2 module that supports 3GPP LTE Release 14/15 Cat NB1 and NB2 with up to 120.7 kbps DL and 21 kbps UL. It is based on Sequans’ second-generation Monarch-N NB-IoT chip that integrates baseband, RF transceiver and front-end, SE, MCU, RAM and power management in a single chip.
Download Datasheet | Product Details
Wireless SoC
Bluetooth Audio SoC for Enhanced Wireless Listening Experiences

Wireless SoC  from Qualcomm

The QCC5121 from Qualcomm is a Bluetooth Audio SoC based on a low power architecture. The SoC provides robust, high-quality wireless listening experiences in small devices. It is designed for compact, feature-rich wireless earbuds, headsets and portable speakers with low power consumption for longer audio playback.
Download Datasheet | Product Details
Bias Tee
50 kHz to 50 GHz Bias Tee

Bias Tee  from Atlantic Microwave

The ABT-50-EXX-YY from Atlantic Microwave is a Bias Tee that operates from 50 kHz to 50 GHz. The Bias Tee can handle an input current of up to 0.15 A and max DC levels of 25 V DC. This device has an insertion loss of less than 4 dB and an isolation of over 30 dB. It can be used in transmission systems to deliver DC power and RF signal to various components using only one coaxial cable.
Download Datasheet | Product Details
RF Mixer
13 to 21 GHz (Ku and K-band) GaAs Sub-Harmonic Mixer

RF Mixer  from Custom MMIC

The CMD303 from Custom MMIC is a GaAs Sub-Harmonic Mixer Die with an RF/LO frequency from 13 to 21 GHz and IF Frequency from DC to 3 GHz. The mixer has an integrated LO amplifier and can be used as an upconverter or downconverter. The device has a low conversion loss of 8.5 dB and excellent LO to RF Isolation of 28 dB eliminating the need for additional filtering.
Download Datasheet | Product Details
RF Surge Protector
N-Type RF Surge Protector from 0.4 to 1.2 GHz

RF Surge Protector  from PolyPhaser

The CGXJ+36NFNF-A from PolyPhaser is an RF Surge Protector that operates from 0.4 to 1.2 GHz. It utilizes a patented hybrid protection technology and integrates a silicon avalanche suppression diode, a metal oxide varistor, and a gas tube. The device has a VSWR of less than 1.1:1 and can handle surge currents of up to 20 kA.
Download Datasheet | Product Details
Sponsored by KP Performance Antennas
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers, interviews and more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]