PREV 19 Feb, 2020 NEXT

New RF and Microwave Products this Week

19 Feb, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 19 Feb, 2020
 
Sponsored by SV Microwave
 
 
 
New RF & Microwave Products this Week
RF Variable Attenuator
63 dB Solid State Programmable Attenuator from 0.1 to 30 GHz

RF Variable Attenuator  from API Technologies - Weinschel

The 4209-30-63-1 from API Technologies - Weinschel is a Solid State Programmable Attenuator that operates from 0.1 to 30 GHz. It has an attenuation range from 0 to 63 dB with a step size of 0.5 dB and can handle up to 28 dBm of CW power. The attenuator can be controlled by using parallel (TTL compatible), I2C, SPI, UART, or USB interfaces.
Download Datasheet | Product Details
RF Mixer
GaAs MMIC Double Balanced Mixer from 25 to 67 GHz

RF Mixer  from Marki Microwave

The MM1-2567LSM from Marki Microwave is a Double Balanced Mixer with an RF/LO frequency from 25 to 67 GHz and an IF frequency from DC to 30 GHz. This GaAs MMIC mixer works well as both an up and down converter. It has a low conversion loss of 9.5 dB and high LO to RF isolation of 40 dB at low LO powers.
Download Datasheet | Product Details
Termination
100 Watt N-Type Termination from DC to 18 GHz

Termination  from Mesa Microwave

The MMC-CT-DC18-100-N-B from Mesa Microwave is a Coaxial Termination that operates from DC to 18 GHz. It can handle up to 100 watts of average power and up to 1 kW of peak power. This termination is matched to 50 ohms and has a VSWR of less than 1.40:1. It is available in a module with N-type male connectors.
Download Datasheet | Product Details
Antenna
4-Port Directional Antenna for 2.4 and 5 GHz Wi-Fi Applications

Antenna  from Ventev

The M6130130MP1D0006W from Ventev is a 4-Port Wi-Fi Directional Antenna that has been developed for the 2.4 and 5 GHz bands. It can connect to any manufacturer's 802.11ac Wave I, II or Wi-Fi 6 access points (APs). The antenna provides a high gain of 13 dBi with a narrow vertical (11 Degrees) and a wide horizontal beamwidth (115 Degrees) which allows concise coverage for aisles and makes it ideal for warehouse deployments.
Download Datasheet | Product Details
Wireless SoC
2.4 GHz Wireless SoC for BLE, Bluetooth 5.1 and Bluetooth Mesh Applications

Wireless SoC  from Silicon Labs

The EFR32BG21 Series from Silicon Labs are 2.4 GHz Wireless SoCs optimized for Bluetooth Low Energy and Bluetooth Mesh applications, including connected lighting, smart plugs, gateways and voice assistants. They deliver up to +20 dBm of output power and have a receive sensitivity better than -104 dBm.
Download Datasheet | Product Details
RF Amplifier
100 W GaN Power Amplifier from 700 MHz to 6 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2070C from Exodus Advanced Communications is a Solid State Power Amplifier that operates from 0.7 to 6 GHz. This class A/AB GaN amplifier produces over 100 watts of power (50 W P1dB) with a gain of over 50 dB. The amplifier has excellent gain flatness, optional monitoring parameters for forwarding/reflected power, voltage, current & temperature sensing for superb reliability and ruggedness.
Download Datasheet | Product Details
Sponsored by SV Microwave
SV for your 5G Product Development
Partner with SV for your 5G Product Development
SV Microwave offers a variety of extreme frequency (26 GHz and above), millimeter wave coaxial cable assemblies and connectors for 5G mobile communication development and production. Let SV be your partner in 5G product development and order COTS today. Click here to learn more.
 
RF Transistor
250 W GaN on SiC HEMT from 2490 to 2690 MHz

RF Transistor  from Wolfspeed, A Cree Company

The GTRA262802FC from Wolfspeed is a GaN on SiC HEMT that operates from 2490 to 2690 MHz. It provides an output power (P3dB) of 250 Watts with a gain of 14.4 dB and an efficiency of 62 %. The transistor requires a supply of 48 V. This pulsed device has a pulse width of 16 µs and a duty cycle of 10%.
Download Datasheet | Product Details
Wireless Charging Receiver
5 W Wireless Power Receiver IC

Wireless Charging Receiver  from Kinetic Technologies

The KTE7000 from Kinetic Technologies is a Single-Chip 5W Wireless Power Receiver IC. This WPC/Qi v1.2.4 BPP Compatible IC receiver integrates a full-synchronous rectifier with robust voltage surge protection and an LDO to efficiently convert the wireless AC power into 5V of DC power with a current of up to 1.5A. Higher power outputs are possible in proprietary modes.
Download Datasheet | Product Details
RF Transceiver
Sub-GHz LoRa Transceiver for Smart Home and IoT Applications

RF Transceiver  from Semtech

The LLCC68 from Semtech is a Long-Range LoRa RF Transceiver designed for medium range indoor and indoor to outdoor wireless applications. The sub-GHz device supports FSK, GFSK, MSK, GMSK and LoRa modulation. It provides LoRa modulation compatible with the Semtech transceivers used by the LoRaWAN specification.
Download Datasheet | Product Details
RF Amplifier
C-Band Solid State Bi-Directional Amplifier from 4.4 to 5.1 GHz

RF Amplifier  from NuWaves Engineering

The NW-BA-C-10-RX03 from NuWaves is a C-Band Solid State Bi-Directional Amplifier module that operates from 4.4 to 5.1 GHz. The BDA has an auto-sense transmit/receive (T/R) control, with an extremely fast T/R mode switch time of under 2 µs. In Tx mode, it provides an output power of up to 10 watts with a gain of 12 dB and power efficiency of 20%. In Rx mode, it provides a gain of 10 dB with a noise figure of 3 dB.
Download Datasheet | Product Details
Signal Generator
RF Signal Generators from 150 kHz to 1.5 GHz

Signal Generator  from Aim-TTi

The TGR2051 from Aim-TTi is an RF Signal Generator that operates from 150 kHz to 1.5 GHz. It can generate a signal with output power from -127 to +13 dBm in 0.1 dBm increments (amplitude can be set in dBm, dBµV or in linear volts). This generator provides signals with a very low phase noise of less than -117 dBc/Hz (@ 1 GHz output and 10 kHz offset) and has a frequency accuracy of 1 ppm.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 6 GHz (Optional to 24 GHz) Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062C from Holzworth is a real-time fully integrated phase noise analysis system that operates from 10 MHz to 26 GHz. It utilizes the same core engine from the HA7402C analyzer along with a pair of high-performance RF Synthesizers as the test signal LOs. The stability of the agile synthesizers operating as LO sources for the high speed, cross-correlation core enables an extremely reliable phase noise analyzer.
Download Datasheet | Product Details
Sponsored by SV Microwave
PCB Edge Launch Connectors
High Frequency Solderless PCB Edge Launch Connectors
SV Microwave’s high speed RF/coaxial solderless edge launch connectors are ideal for high frequency PCB applications where precision is key and don’t cause damage to the printed circuit board. Current interface configurations include our high frequency SMA, 2.92mm, 2.4mm and 1.85mm series. Click here to learn more.
 
RF Shielded Test Enclosure
Benchtop RF Shield Box from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-S860 from RF Electronics is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. The enclosure has a thick RF absorbing foam that provides isolation of more than 120 dB @ 3 GHz. It has shielded power filters that can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
RFID Tag
Ultra-Rugged Washable RFID Linen Tag

RFID Tag  from Fujitsu

The WT-A543 from Fujitsu is an RFID Linen Tag designed for commercial and industrial textile applications. This passive tag operates from 865.6 to 867.7 MHz / 902 to 928 MHz and has a read range of up to 250 cm. The WT-A543 RFID Linen Tag is 30 percent smaller than the previous generation (7 mm form factor) and can easily be inserted into any hem.
Download Datasheet | Product Details
RFID Reader
Enterprise-Grade RAIN RFID Reader for Next-Gen IoT Solutions

RFID Reader  from Impinj

The R700 from Impinj is a RAIN RFID Reader with 4 Antenna Ports, extendable up to 32 antennas with one-wire antenna connectivity and facilitates large-scale system deployments. This reader has been designed to meet the increasing demands of next-generation IoT solutions and enterprise-grade RAIN deployments. It transmits up to 33 dBm of power and has a receive sensitivity of up to -92 dBm.
Download Datasheet | Product Details
Microwave Absorber
High-Tolerance Absorber from 800 MHz to 18 GHz

Microwave Absorber  from Laird Performance Materials

The SoftZorb MCS from Laird is an Absorbing Material for telecom equipment such as optical transceiver cavities and antennas. It is designed for the frequency range from 800 MHz to 18 GHz and has a volume resistivity of 6.05 x 1012 ohm-cm. The SoftZorb offers easier deflection (over 20 dB @ 50 psi) for use in cavities whenever a lid may potentially contact with and compress the absorber.
Download Datasheet | Product Details
Base Station Antenna
14-Port Panel Antenna from 698 to 2690 MHz

Base Station Antenna  from Amphenol Antenna Solutions

The 5796400 from Amphenol Antenna Solutions is a 14-Port Panel Antenna that operates in 4 bands (2 x 698-960, 2 x 1427-2180, 1 x 1427-2690, 2 x 2490-2690 MHz). This dual-polarized antenna provides a gain of over 12.6 dBi and has a horizontal beamwidth of 65 degrees. It features an RET (Remote Electronic Tilt) module inside the antenna for providing electrical tilt ranging from 2 to 12 Degrees.
Download Datasheet | Product Details
RF Tapper
RF Tapper from 138 to 960 MHz for Public Safety DAS

RF Tapper  from RF Industries

The RFPT-NF-PS3 from RF Industries is a Power Tapper for Public Safety Distributed Antenna System (DAS) applications. It operates from 138 to 960 MHz while covering VHF, UHF, FirstNet, 700 MHz, 800 MHz, and 900 MHz systems. The low PIM tapper can handle an average power of up to 200 W and has a split ratio of 2:1 with a 3 dB difference between the outputs.
Download Datasheet | Product Details
RF Capacitor
High-Frequency Broadband Ceramic Capacitor

RF Capacitor  from Passive Plus Inc

The 0201BB104KW160 from Passive Plus is a Broadband Ceramic Capacitor that can be used from 16 kHz to more than 40 GHz. It has a capacitance of 100 nF, a working voltage (WVDC) of 16V, and an insertion loss of less than 1 dB. The dielectric can withstand a voltage of up to 250% of the working voltage for 5 seconds.
Download Datasheet | Product Details
GNSS Module
Multi-Constellation GNSS Module for Mission Critical Applications

GNSS Module  from Telit Communications

The SE868 V3 from Telit is a Multi-Constellation GNSS Module that supports GPS, GLONASS, Beidou, Galileo, and SBAS, making it a high-performance position reporting and navigation solution. The module navigates to -161 dBm and tracks to -165 dBm, providing improved performance (0.01 m/s) in harsh environments. It also supports ephemeris file injection (A-GPS).
Download Datasheet | Product Details
Band Pass Filter
Bandpass Filter for L1 & L2 GPS Frequency Bands

Band Pass Filter  from GPS Source

The L12F-HR from GPS Source is a Single Input L1/L2 Bandpass Filter that passes only L1 (1560 to 1590 MHz) and L2 (1200 to 1250 MHz) GPS frequencies. The device features excellent sideband rejection and has an insertion loss of less than 5.5 dB. The filter may pass DC or can also be used as a DC block. It is available in a module with N, SMA, and TNC-type M/F connectors.
Download Datasheet | Product Details
OCXO
5 to 100 MHz OCXO with CMOS/TTL/Sinewave Waveforms

OCXO  from Bliley Technologies

The BOVTA Series from Bliley Technologies are Oven Controlled Oscillators that operate from 5 to 100 MHz (The required frequency can be specified when ordering). These OCXOs have a phase noise of -145 dBc/Hz at 1 kHz and a rise/fall time of 10 nS. They provide CMOS, TTL or sinusoid waveforms at the output. The OCXOs consume a start-up power of up to 7 W and a steady-state power of 2 W.
Download Datasheet | Product Details
PLDRO
1 to 50 GHz Dual Loop Phase Locked Oscillators with 10 MHz Ext. Reference

PLDRO  from Microwave Dynamics

The PLO-4200 from Microwave Dynamics is a Dual Loop PLDRO that can be configured to operate at a single frequency from 1 to 50 GHz. It also has a mechanical tuning range of 100 MHz. It provides an output power of up to 13 dBm (25 dBm also available) and has a phase noise of -110 dBc/Hz @ 10 kHz offset at 10 GHz. The device requires a supply voltage of 12/15 V and consumes 330 mA of current.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, articles, white papers and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]