1. everything RF
  2. RF Newsletters
more
PREV 17 June, 2020 NEXT

New RF and Microwave Products this Week

17 June, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 17 June, 2020
 
Sponsored by Custom MMIC / Qorvo
 
 
 
New RF & Microwave Products this Week
Power Divider
2-Way MMIC Power Divider from DC to 18 GHz

Power Divider  from Mini Circuits

The EP2RKU+ from Mini-Circuits is a 2-way, In-phase, GaAs MMIC power divider/combiner that operates from DC to 18 GHz. It can handle up to 0.6 W input power with an insertion loss of 3.3 dB and provides isolation of up to 26 dB. The divider has phase unbalance of 1.1-degree, amplitude unbalance of 0.02 dB, and VSWR of up to 1.5:1.
Download Datasheet | Product Details
RF Amplifier
25 W GaN MMIC Power Amplifier from DC to 6 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA0060025F1 from Wolfspeed is a GaN MMIC Power Amplifier that operates from DC to 6 GHz. The amplifier delivers up to 25 W of saturated output power with a small signal gain of 17 dB and a Power Added Efficiency of better than 20%. It requires a DC Supply of 50 V for operation. The amplifier is fabricated using a GaN High Electron Mobility Transistor based MMIC.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port USB Controlled VNA from 300 kHz to 9 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The SC5090 from Copper Mountain Technologies is a modular 2-port compact VNA that operates from 300 kHz to 9 GHz. It has a dynamic range of 140 dB, an output power of 15 dBm, and a typical measurement speed of 16 µs per point. The VNA has a directivity of 46 dB and can be used to measure all four S parameters (S11, S21, S12, and S22).
Download Datasheet | Product Details
RF Amplifier
0.5 W Low Noise Amplifier from 2 to 18 GHz

RF Amplifier  from AmpliTech

The AWMP-35-02001800-5227-D4 from AmpliTech is a Low Noise Amplifier that operates from 2 to 18 GHz. It provides a P1dB of 27 dBm with a gain of 35 dB with a noise figure of 5.2 dB. The amplifier requires a DC Supply of 15 V and consumes 550 mA of current. It is designed using State-of-the-Art PHEMT Technology and follows MIL-883 and MIL-45208 constructional standards for reliability.
Download Datasheet | Product Details
RF Amplifier
13 dBm Waveguide Power Amplifier from 60 to 90 GHz

RF Amplifier  from AT Microwave

The AT-PA-6090-1313 from AT Microwave is a Waveguide Power Amplifier that operates from 60 to 90 GHz. It provides a saturated output power of 13 dBm, P1dB of 11 dBm, a gain of 13 dB and a noise figure of 6 dB. It is suitable for applications such as E-Band Communication, Foreign Object Debris, Test Equipment, RF Over Fiber and Radar Systems.
Download Datasheet | Product Details
RF Cable
Ultra-Low Loss Cables from 0.3 to 67 GHz

RF Cable  from MegaPhase

The Phase3 from MegaPhase are ultra-low loss cables that operate up to 67 GHz. These cables are optimized for consistent and repeatable performance where the demand is minimum attenuation, high shielding effectiveness, and low VSWR. They can be used to make cable assemblies with 1 mm, 1.85 mm, 2.4 mm, 2.9 mm, 3.5 mm, Type-N, TNC and SMA connectors.
Download Datasheet | Product Details
Sponsored by Custom MMIC / Qorvo
CMD320C3
Industry Leading Ultra-Low Noise Amplifiers
The CMD320C3 is an Ultra-Low Noise Amplifier optimized for broadband performance delivering 18 dB of gain with a corresponding noise figure of 1.07 dB at 12 GHz. The device is ideally suited for EW and Communications Systems where small size, low power consumption and reliability are essential. Click here to learn more.
 
RF Amplifier
200 W Solid State High Power Amplifier from 1 to 32 MHz

RF Amplifier  from Exodus Advanced Communications

The AMP1053-1 from Exodus Advanced Communications is a solid-state high power amplifier that operates from 1 to 32 MHz. It delivers an output power of more than 200 Watts with a gain of over 53 dB and has a rise/fall time of less than 5 µs. This Class AB linear LDMOS amplifier requires a supply voltage of 32 VDC and consumes up to 15 A of current.
Download Datasheet | Product Details
RF Amplifier
100 W CW Power Amplifier from 100 kHz to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 100U1000 from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled CW Amplifier that operates from 100 kHz to 1000 MHz. This broadband amplifier is ideal for applications where instantaneous bandwidth, high gain, and linearity are required. The amplifier is available in a benchtop cabinet or rack-mount module with front panel control options.
Download Datasheet | Product Details
RF Amplifier
2 Stage RF Amplifier from 30 kHz to 25 GHz

RF Amplifier  from SHF Communication Technologies

The SHF P101 A from SHF Communication is a 2 Stage RF amplifier that operates from 30 kHz to 25 GHz. It provides a P1dB of 18 dBm with a gain of 16 dB and a low noise figure. The amplifier consumes 4.5 W of power and requires 9V of input supply. This MMIC amplifier and is available in a package that measures 51 x 40 x 16 mm with SMA Female connectors.
Download Datasheet | Product Details
General Crystal Oscillator
SMD Crystal Oscillators from 1 to 200 MHz with CMOS Output

General Crystal Oscillator  from Dynamic Engineers

The XO2016BM Series from Dynamic Engineers are Crystal Oscillators that operate from 1 to 200 MHz. They have a frequency stability of ±25 ppm and can operate over a temperature range from -40 to +85°C. The crystal oscillators require a supply voltage of 1.8, 2.5, or 3.3 V, and provide a CMOS waveform at the output. They have a rise/fall time of up to 3 ns and a duty cycle of up to 55%.
Download Datasheet | Product Details
Frequency Synthesizer
RF Synthesizer Module from 10 MHz to 12.5 GHz

Frequency Synthesizer  from Holzworth Instrumentation

The HSM12001B from Holzworth Instrumentation is an RF synthesizer module that operates from 10 MHz to 12.5 GHz. This microwave CW source is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliments the phase coherent nature of this digital-analog hybrid signal source.
Download Datasheet | Product Details
RF Switch
SP8T Absorptive Switch from 2 to 18 GHz

RF Switch  from Planar Monolithics Industries

The P8T-2G18G-60-T-SFF-NSI from Planar Monolithics Industries is an SP8T Absorptive Switch that operates from 2 to 18 GHz. This switch has an insertion loss of 4.5 dB, isolation of 60 dB, and can handle up to 20 dBm of power. It has a VSWR of 2:1 and a switching speed of 100 nsec. The switch module requires a +/-5V DC Supply with a maximum current consumption of 300 mA.
Download Datasheet | Product Details
Sponsored by Custom MMIC / Qorvo
 
 
 
RF Variable Attenuator
63 dB Solid-State Programmable Attenuator from 0.1 to 18 GHz

RF Variable Attenuator  from JFW Industries

The 50P-2103 from JFW Industries is a Solid-State Programmable Attenuator that operates from 0.1 to 18 GHz. This USB-controlled attenuator has seven individually controlled attenuation steps: 0.5, 1, 2, 4, 8, 16, and 32 dB to cover a total attenuation range of 0 to 63 dB. This 50-ohm attenuator requires a 5 V DC supply and is available in a module with SMA connectors.
Download Datasheet | Product Details
Directional Coupler
10 dB Directional Coupler from 1 to 18 GHz

Directional Coupler  from Eclipse MDI

The ECP118010 from Eclipse MDI is an Ultra-Broadband 10 dB Directional Coupler that operates from 1 to 18 GHz. It has a directivity of over 14 dB, an insertion loss of 1.5 dB, and frequency sensitivity of +/-0.45 dB. This coupler can handle up to 20 watts of CW power and peak power of 3kW. The ECP118010 is MIL-E-5400 and MIL-E-16400 qualified and is available in two different compact packages with SMA female connectors.
Download Datasheet | Product Details
Block Up Converter
Ultra-Compact Outdoor Ku-Band BUC from 13.75 to 14.5 GHz

Block Up Converter  from Amkom Design Group Inc

The APKU80-XXXXX from AMKOM is a Ku-Band BUC that converts an input frequency from 950 - 1700 MHz to an output frequency from 13.75- 14.50 GHz. It provides saturated output power up to 80 Watts with a gain of 78 dB. The BUC exceeds all IESS-308/309 phase noise standards and is compliant with MIL-STD810E, MIL-STD810F and Method 514.5 C-2 Transport standards.
Download Datasheet | Product Details
RF Module
Ultra-Low Power Wi-Fi / Bluetooth Combo Module for IoT Applications

RF Module  from InnoPhase

The INP1010/1011 from INNOPHASE is a Multi-Protocol Wireless Module that supports 802.11 b/g/n and Bluetooth 5.0. In the TX mode of Wi-Fi, the module transmits 18 dBm (802.11b), 15.5 dBm (802.11g), and 12 dBm (802.11n). It has a receiver sensitivity of -96 dBm (802.11b). The low power module requires a DC Voltage of 3.3V and draws less than 19 µA of current.
Download Datasheet | Product Details
RF Module
Bluetooth 5.0 Module with an Integrated PCB Antenna

RF Module  from TAIYO YUDEN

The EYSLSNZWW from Taiyo Yuden is a Bluetooth 5.0 low energy module that supports data rates of up to 2 Mbps. This module operates from 2402 to 2480 MHz and provides an output power of up to 4 dBm. It is based on the Nordic nRF52810 chipset (Arm Cortex M4 32 Bit Processor) with 192 kB Flash and 24 kB RAM and has an integrated system clock.
Download Datasheet | Product Details
RF Amplifier
150 W Power Amplifier from 250 kHz to 220 MHz

RF Amplifier  from RF-Lambda

The RFLUPA250K220MA from RF-Lambda is a power amplifier from 250 kHz to 220 MHz. It provides 150 W of output power with a gain of 60 dB (2.5 dB gain flatness) and an efficiency of 55%. The amplifier has an output IP3 of 56 dBm at 50 W output power and a VSWR of 1.5:1. It requires a 48 V supply and consumes 8 A of current.
Download Datasheet | Product Details
RF Variable Attenuator
AlGaAs PIN Diode Based Variable Attenuator from 80 to 100 GHz

RF Variable Attenuator  from MACOM

The MAAV-011014-DIE from Macom is a Voltage Variable Attenuator (VVA) that operates from 80 to 100 GHz. This device is designed and manufactured utilizing MACOM’s AlGaAs PIN diode technology which is ideally suited for high frequency, high linearity, and high power applications. It provides attenuation of over 25 dB that can be controlled via voltage ranging from -5 to +1.4 V.
Download Datasheet | Product Details
Analog to Digital Converter
5.4 GSPS 12-bit Analog-to-Digital Converter for LiDAR Applications

Analog to Digital Converter  from e2v

The EV12AS350A from Teledyne e2v is a 12-bit Analog-to-Digital Converter (ADC) featuring four identical cores where all four ADCs are interleaved together delivering a 5.4 GSPS conversion rate. All four ADCs are clocked by the same external input clock signal delayed with the appropriate phase. It receives an external 5.4 GHz clock (maximum frequency) and preferably a low jitter sinewave signal.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]