1. everything RF
  2. RF Newsletters
more
PREV 22 June, 2020 NEXT

Latest News & White Papers this Week

22 June, 2020 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 22 June, 2020
 
Sponsored by Coilcraft
 
 
 
Latest News this Week
National Instruments is now NI - National Instruments
DARPA Enabling Long-Range Communications without Large, Power-Hungry Antennas - DARPA
Bloomberg Finds 5G Networks Across Asian Cities to be Patchy - Bloomberg
Reconfigurable mm-Wave Antenna Test Chambers for 5G and Radar Applications - mmWave Test Solutions
GaN Based Micro-LED Achieves 7.7 GBPS Data Transmission Using LiFi Technology - CEA-Leti
Vaunix Releases 64x8 Digital Matrix Attenuator Handover Test System for 5G MIMO Testing - Vaunix
AdauraTech's Multi-Channel Programmable Attenuators Now Support Wi-Fi 6E Bands and PoE - Adaura Technologies
Calian Introduces a New Spectrum Analyzer with Signal Analysis Capabilities - Calian
Anritsu & Bluetest Introduce OTA Test Solution for 5G FR1/FR2 Mobile Terminals - Anritsu
Airbus Introduces SATCOM On-The-Move Solution for Military Applications - Airbus
Altum RF Introduces LNA Demo Boards for 5G mm-Wave and 24 GHz ISM Applications - Altum RF
New Narda STS Personal Monitor Detects Electromagnetic Fields up to 60 GHz - Narda STS
Ericsson Mobility Report Shows Mobile Networks’ Crucial Role During COVID-19 Pandemic - Ericsson
MIPI Alliance Updates the RF Front End Interface Standard to Aid Successful 5G Rollouts - MIPI Alliance
More News
Interesting White Papers
Guide to Selecting a Coaxial Switch - Dow-Key Microwave
GNSS Receiver Stimulation on Automotive Test Beds for Self-Driving Cars - Rohde & Schwarz
How Is Noise Generated? - Noisecom
Reducing 5G Deployment Costs Using Holographic Beam Forming Repeaters - Pivotal Commware
Understanding the LoRa Adaptive Data Rate - Semtech
More White Papers
Upcoming Webinar
Event Image
The Importance of Standards for Broad Adoption of Wireless Power
Date: June 25, 2020
Location: Online
More Events
Sponsored by Coilcraft
Coilcraft
Wirewound Ferrite Beads Offer a High Magnitude of Attenuation across a Wide Frequency Range
Coilcraft wirewound ferrite beads provide superior attenuation and frequency performance, allowing smaller solution sizes compared to traditional thick-film chip ferrite beads. Click here to Learn more!
 
Featured Products this Week
Front End Module
GaN Tx/Rx MMIC from 26 to 34 GHz for Radar and Space Applications

Front End Module  from OMMIC

The CGY2750UH/C1 from OMMIC is a GaN Tx/Rx MMIC that operates from 26 to 34 GHz. The device consists of a high-performance power amplifier, low noise amplifier, and Tx/Rx switch. It delivers an output power of 35 dBm with a PAE of over 15% and on the Rx side it provides a gain of 20 dB with a noise figure of 3 dB.
Download Datasheet | Product Details
RF Amplifier
9.5 dBm Waveguide Amplifier from 75 to 110 GHz

RF Amplifier  from Norden Millimeter

The NA75110G30N10P-3 from Norden Millimeter is a Waveguide Amplifier that operates from 75 to 110 GHz. It provides a saturated output power more than 9.5 dBm, a P1dB of 5.5 dBm, gain of 30 dB and a noise figure of 10 dB. The amplifier consumes 375 mA of current from a 12 V input supply and have a VSWR of less than 4.5:1.
Download Datasheet | Product Details
Low Pass Filter
400 W Absorptive Low Pass Filter from 10 to 500 MHz

Low Pass Filter  from Werlatone Inc

The AF9350 from Werlatone is an Absorptive Low Pass Filter with a passband from 10 to 500 MHz and a stopband from 750 to 3000 MHz. It has an insertion loss of less than 0.5 dB in the passband with a rejection of 45 dB in the stopband. The filter can handle up to 400 W of CW input power with a VSWR of 1.25:1 in the passband and 25 W of CW input power with a VSWR of 1.6:1 in the stopband.
Download Datasheet | Product Details
Bi-Directional Coupler
10 dB Surface Mount Bi-Directional Coupler from 2.5 to 6 GHz

Bi-Directional Coupler  from Innovative Power Products

The IPP-8048 from Innovative Power Products is a Bi-Directional Coupler that operates from 2.5 to 6 GHz. It provides a coupling factor of 10 dB (0.5 dB coupling deviation) with directivity of 15 dB and has an insertion loss of less than 0.4 dB. The coupler can handle up to 100 W of input power and has a VSWR of 1.35:1. It is available in a surface-mount package that measures 25.41 x 8.89 x 1.935 mm.
Download Datasheet | Product Details
RF Spectrum Analyzer
World’s Smallest mm-Wave Spectrum Analyzer from 24 to 43 GHz

RF Spectrum Analyzer  from SAF Tehnika

The J0SSAP54 from SAF Tehnika is a Handheld Spectrum Analyzer that operates from 24 to 43 GHz. It has RBW of 100, 300, 1000 kHz, VBW of 1, 3, 10, 30, 100 kHz and a DANL of -100 dBm at RBW of 100 kHz. The analyzer has a minimum span of 10 MHz and can scan the full bandwidth of 100 MHz in 0.2 seconds. This spectrum analyzer has the essential tools for interference detection, site survey and path alignment.
Download Datasheet | Product Details
RF Amplifier
Ku-Band Waveguide Low Noise SATCOM Amplifier

RF Amplifier  from AmpliTech

The APTW6-10701275-75K10-WR75-D6 from AmpliTech is a high gain, low noise SATCOM amplifier that operates from 10.7 to 12.75 GHz. It delivers an output power of 15 dBm with a gain of more than 60 dB and a noise figure of 0.88 dB. This amplifier is pressurizable to 5 psi and has inbuilt reverse voltage protection. It is ideal for SATCOM applications, such as for military and civil Satellite Downlinks.
Download Datasheet | Product Details
RF Amplifier
60 Watt L & S-Band Power Amplifier from 960 to 1390 MHz

RF Amplifier  from NuWaves Engineering

The L60T01 from Nuwaves is an L & S-Band Power Amplifier that delivers 60 watts of RF power from 960 to 1390 MHz to extend the operational range of airborne telemetry links and transmitters. It can handle an RF input power of 0 dBm (1 mW) and provides 48 dB of gain for continuous wave (CW) and near-constant-envelope waveforms.
Download Datasheet | Product Details
SATCOM Amplifier System
Ka-Band Low Noise Amplifier from 17.7 to 21.2 GHz

SATCOM Amplifier System  from General Dynamics SATCOM Technologies

The LKKC-20120 from General Dynamics SATCOM Technologies is a Ka-Band Low Noise Amplifier that operates from 17.7 to 21.2 GHz. It has an output P1dB up to 22 dBm, gain of over 50 dB (±0.5 dB) and a noise temperature of 120K. The noise temperature specification (120K) is guaranteed over the full bandwidth of the LNA and is measured using a cryogenic hot/cold load test setup.
Download Datasheet | Product Details
Block Up Converter
Ku-Band BUC from 17.3 to 17.8 GHz for Satellite Earth Stations

Block Up Converter  from ITS Electronics

The UC-17A317A8-1533-1U from ITS Electronics is a Ku-Band BUC that converts an input frequency from 950-1450 MHz to an output frequency from 17.30-17.80 GHz. It provides a P1dB of up to 15 dBm with a gain of over 33 dB. The device requires an AC supply voltage of 90 to 250 V and consumes up to 50 watts of power. It supports a 10/100 Base-T Ethernet interface and features a DB-9 socket for +15 VDC Output at the rear panel.
Download Datasheet | Product Details
Phase Noise Analyzer
Phase Noise Test System from 50 kHz to 40 GHz

Phase Noise Analyzer  from Keysight Technologies

The N5511A is a Phase Noise Test System that operates from 50 kHz to 40 GHz (3 GHz and 26.5 GHz option also available) with offsets from .01 Hz to 160 MHz internally. It can be configured for either single or dual-channel operation and has a high dynamic range. This system can measure phase noise down to kT (-177 dBm/Hz at room temperature), which is the theoretical limit for thermal phase noise floor.
Download Datasheet | Product Details
Wireless Charging Coil
15 W Qi-compliant Wireless Charging Transmitter Coil

Wireless Charging Coil  from Vishay

The IWTX9955DEEB110KF3 from Vishay is a Qi-compliant Wireless Charging Transmitter Coil. The coil has an inductance of 11.3 uH, Q factor of 100, and can operate over a temperature range from -40 to +125°C. It has a DCR of up to 80 mW and can handle 15 watts of power. This RoHS-compliant and Pb-free device has 3 coils and can be used for general wireless charging applications.
Download Datasheet | Product Details
RF Mixer
GaAs MMIC IQ Mixer from 2 to 18 GHz

RF Mixer  from Marki Microwave

The MMIQ-0218H from Marki Microwave is a low LO drive, GaAs MMIC IQ Mixer with RF/LO frequency range from 2 to 18 GHz and IF frequency range from DC to 3 GHz. It provides an image rejection of 35 dB, has a noise figure of 10.5 dB and a conversion loss of 7.5 dB. The mixer has an LO-RF isolation of 53 dB, LO-IF isolation of 26 dB and RF-IF isolation of 36 dB.
Download Datasheet | Product Details
OCXO
10/100 MHz Ultra Low Phase Noise Dual Frequency OCXO

OCXO  from NEL Frequency Controls

The O-CDFEXYZXX-X-X-10MHz/100MHz from NEL Frequency Controls is an Ultra Low Phase Noise Dual Frequency OCXO that operates at 10 MHz and 100 MHz. The Lower frequency OCXO provides excellent frequency stability of ±2 ppb over-temperature, low time aging of 0.25 ppb/day, supply and load variations, as well as exceptionally low phase noise of -145 dBc/Hz at 10 Hz offset, and short-term stability.
Download Datasheet | Product Details
Cellular Module
Low Power Cellular SoC for IoT and M2M Applications

Cellular Module  from Riot Micro

The RM1000 is a low power SoC for Cellular IoT and Machine-to-Machine (M2M) applications. The device is a dual-mode LTE-M / NB-IoT cellular baseband with integrated SRAM and full software stack comprising LTE L2/L3, AT Command stack, and TCP/UDP/IP stack. It is ideal for asset management, home automation, industrial, point-of-sale, smart energy, vending and automotive applications.
Download Datasheet | Product Details
Antenna
Peel & Stick Antenna for UAV & Drone Applications

Antenna  from Octane Wireless

The AA-1700-6000 from Octane Wireless is a Peel & Stick Applique Antenna that operates from 1700 to 6000 MHz. This C/S-band antenna delivers a gain of 1.3 dBi and can handle up to 10 watts of input power. It has a VSWR of less than 2:1 and features an adhesive backing that allows for quick installations. This linearly polarized antenna has low visibility and can provide stealthy installations on vehicles.
Download Datasheet | Product Details
RFID Tag
860 to 960 MHz UHF RFID Inlay

RFID Tag  from Avery Dennison

The AD-810r6 from Avery Dennison is an ISO-18000-6C, EPC Class 1 Gen 2 UHF RFID tag that operates from 860 to 960 MHz (Globally). It has been developed using the Impinj Monza R6 chip. This RFID tag measures 16 mm in diameter and has an EPC memory of 96 bits. It is ideal for asset tracking, beauty, pharmaceutical and healthcare applications.
Download Datasheet | Product Details
Delay Line
Programmable Delay Lines from DC to 18 GHz

Delay Line  from Colby Instruments

The PDL-100A Series from Colby Instruments are Programmable Delay Line (PDL) Instruments that operate from DC to 18 GHz. These delay lines provide a range of variable and programmable delays up to 100 nanoseconds (depending on specific model) in a single system unit. These delay lines are available in a benchtop unit that measures 13.375 x 12.875 x 5.625 inches.
Download Datasheet | Product Details
Sponsored by Coilcraft
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]