1. everything RF
  2. RF Newsletters
more
PREV 13 July, 2020 NEXT

Latest News & White Papers this Week

13 July, 2020 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 13 July, 2020
 
Sponsored by Mouser
 
 
 
Latest News this Week
You Can Now Rent Rohde & Schwarz Equipment from Electro Rent in Europe - Rohde & Schwarz
SweGaN Launches New 150 mm GaN-on-SiC Epiwafer Product for RF Applications - SweGaN AB
Anritsu Introduces 43.5 GHz Extended-K Coaxial Connector Family for Test Equipment - Anritsu
Qualcomm Using Soitec's Piezoelectric-on-Insulator Substrate to Develop 5G RF Filters - Qualcomm
Empower RF Releases 90 KW Scalable Liquid Cooled SSPA from 5.2 to 5.9 GHz - Empower RF
CommScope Introduces Portable Wi-Fi Solution for Outdoor Sites - CommScope
The US Needs to Expand its 5G Spectrum by Licensing Mid-Band Frequencies - Analysys Mason
Radio Frequency Duplexer Market to Grow 11% Annually from 2020 to 2025 - Research and Markets
New Test Solution Optimizes Performance of 5G Devices that Use MIMO Technology - Keysight Technologies
BAE Systems Develops Radiation-Hardened Software Defined Radios for Space Applications - BAE Systems
Radiocraft Introduces Shielded Industrial IoT Module based on MIOTY Technology - Radiocrafts
New Ericsson Software Helps Operators Shift to Standalone 5G NR - Ericsson
More News
New White Papers & Articles
Introduction to RNVNA, A Multiport Network Analysis Solution - Copper Mountain Technologies
5G New Radio Over-the-Air Base Station Receiver Tests - Rohde & Schwarz
Design and Implementation of a Miniature X-Band Edge-Coupled Microstrip Bandpass Filter - AWR Corporation
Low Latency Software Defined Radios for Point-to-Point Networks - Per Vices
Going the Distance: Four Approaches for Expanding the Range of Bluetooth - Laird Connectivity
More White Papers
Upcoming Webinar
Event Image
Industry Applications for Vector Network Analyzers
Date: Jul 16, 2020
Location: Online
More Events
Sponsored by Mouser
Xilinx
Characterize and evaluate the Zynq UltraScale+ XCZU29DR-2FFVF1760E RFSoC
Xilinx Zynq UltraScale+ RFSoC ZCU1275 Characterization Kit offers integrated ADCs and DACs, as well as GTY, GTR transceivers. All 16 12-bit 2GSPS ADCs, all 16 14-bit 6.4GSPS DACs, all 16 GTY transceivers, and all 4 GTR transceivers are accessible through Samtec BullsEye® connectors. Click here to learn more.
 
Featured Products this Week
RF Amplifier
30 to 36 GHz Amplifier-Filter with Post Amplification Bandpass Filtering

RF Amplifier  from Lexatys

The 350-02871-0001 from Lexatys is a Filtered Microwave Amplifier that operates from 30 to 36 GHz. It delivers a P1dB of more than 15 dBm with a gain of 13 dB. This amplifier has a built-in bandpass filter which provides an attenuation of 45 dBc from 45 to 54 GHz and 55 dBc from 0.1 to 18 GHz.
Download Datasheet | Product Details
Limiter
100 W MMIC Power Limiter from 10 MHz to 6 GHz

Limiter  from Teledyne e2v HiRel Electronics

The TDLM06100 from Teledyne e2v HiRel Electronics is an RF Power Limiter that operates from 10 MHz to 6 GHz. It can handle up to 50 dBm of pulsed input power, has a P1dB of up to 13 dBm and leakage power of less than 16.8 dBm. The device has an insertion loss of less than 1.2 dB, a response time of 0.6 ns, and a recovery time of 1 ns.
Download Datasheet | Product Details
RF Cable
Low Loss Armored Test Cables for Compliance Measurements

RF Cable  from MegaPhase

The EM Series from MegaPhase are Armored Test Cables that operate up to 40 GHz. These low loss, ultra-rugged cables are constructed using materials that meet electromagnetic compatibility testing standards. They provide excellent shielding effectiveness of -120 dBc and the benefits of crush-resistant armoring.
Download Datasheet | Product Details
Horn Antenna
Microwave Horn Antenna from 0.8 to 6 GHz for EMC Testing

Horn Antenna  from AR RF/Microwave Instrumentation

The ATH800M6G from AR RF/Microwave Instrumentation is a Microwave Horn Antenna that operates from 0.8 to 6 GHz. With a minimum gain of 11 dBi, the antenna supplies the high-intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room. This horn antenna measures 18.25 x 18.25 x 27.25 inches and is available with a 7-16 DIN Female connector.
Download Datasheet | Product Details
RF Amplifier
400 W Pulsed GaN Power Amplifier from 8.2 to 9.5 GHz

RF Amplifier  from Diamond Microwave

The DM-X400-04 from Diamond Microwave is a compact pulsed X-band GaN SSPA that operates from 8.2 to 9.5 GHz. It provides peak pulsed output power of more than 400 W (+53 dBm) over a 1300 MHz bandwidth, operating with pulse widths up to 100 µs and with duty cycles up to 15%.
Download Datasheet | Product Details
Power Divider
2-Way Surface Mount Power Divider from 0.5 to 7 GHz

Power Divider  from BBTLine

The BBTLine 2Way SMT from BBTLine is a 2 Way Surface Mount Power Divider that operates from 500 MHz to 7 GHz. It has an insertion loss of under 0.7 dB and provides over 19 dB of isolation. The divider can handle up to 20 watts of power and has an excellent amplitude/phase balance of 0.1 dB/1 degrees at 6 GHz.
Download Datasheet | Product Details
RF & Microwave Isolator
Dual-Stage Isolator from 806 to 960 MHz

RF & Microwave Isolator  from Sinclair Technologies

The I421(Y)A from Sinclair Technologies is a Dual-Stage Isolator that operates from 806 to 960 MHz. It provides over 50 dB of isolation and has an insertion loss of less than 0.4 dB. The device can handle 125 watts of input power and has a VSWR of less than 1.25:1. It has threaded holes in a steel casing that allow surface mounting to any non-magnetic material.
Download Datasheet | Product Details
Fixed Attenuator
1-30 dB Fixed Attenuators from DC to 3 GHz

Fixed Attenuator  from JFW Industries

The 75FP-XXX-3G from JFW Industries are Fixed Attenuators that operate from DC to 3 GHz. They are available in various options with attenuation values from 1 to 30 dB in 1 dB increments. These 75-ohm attenuators can handle up to 0.5 W of average power and up to 100 W of peak power. They are available in a connectorized package with F-type, BNC, and N-type connector options.
Download Datasheet | Product Details
Front End Module
Switch + LNA Module for 5G Massive MIMO Base Stations

Front End Module  from pSemi, A Murata Company

The PE53111 from pSemi is a switch + LNA module that operates from 2.3 to 2.7 GHz. The module has an on-chip, fail-safe switch that can handle an average input power of up to 5W. The modules support sub-6 GHz 5G new radio (NR) bands and meet the stringent RF system requirements of massive MIMO base stations.
Download Datasheet | Product Details
RF Module
Wireless Lighting Module with Bluetooth 5.0 & Mesh Connectivity

RF Module  from Silicon Labs

The BGM210L from Silicon Labs is Wireless Gecko (EFR32MG21 SoC) Lighting Module that supports Bluetooth 5.1 and Bluetooth Mesh connectivity. The module delivers excellent RF range and performance, supports OTA firmware updates, and enhanced security. It has an Rx sensitivity of -97.0 dBm at 1 Mbps GFSK and has a maximum Tx power of 12.5 dBm. The module has a temperature rating suited for enclosed operation in lightbulb housings.
Download Datasheet | Product Details
RF Variable Attenuator
12-Bit Programmable Attenuator from 2 to 18 GHz

RF Variable Attenuator  from Planar Monolithics Industries

The DTA-2G18G-60-12-CD-1-20DBM-TS from Planar Monolithics Industries is a 12-Bit Programmable PIN Diode Attenuator that operates from 2 to 18 GHz. It has an attenuation range of 60 dB with a 0.016 dB step size and an insertion loss of less than 4.8 dB. The attenuator has a switching time of less than 1 µs, a VSWR of 2:1, and can handle up to 1 W of average input power.
Download Datasheet | Product Details
SATCOM Amplifier System
X-Band Outdoor TWTA from 7.9 to 8.4 GHz for Satellite Uplink Applications

SATCOM Amplifier System  from Communications & Power Industries

The TL05XO from CPI is an Outdoor Travelling Wave Tube Amplifier designed for satellite uplink applications from 7.9 to 8.4 GHz. This X-band amplifier delivers a TWT output power of 500 watts with a gain of over 72 dB. It has been designed and built to survive in extremely adverse environmental conditions and features an increased cooling margin for longer life.
Download Datasheet | Product Details
Bi-Directional Coupler
30 dB Bi-Directional Coupler from 0.6 to 18 GHz

Bi-Directional Coupler  from Maury Microwave

The LLC18-7 from Maury Microwave is a Bi-Directional Coupler that operates from 0.6 to 18 GHz. It provides 30 dB of coupling, has an insertion loss of 0.25 dB and directivity of up to 15 dB. The device can handle up to 500 W of CW and 2 kW of peak input power. It is available in a module with 7 mm connectors at input/output ports and 3.5 mm Female connector at the coupling port.
Download Datasheet | Product Details
Antenna
Flexible Embedded Multi-Band Antenna for IoT Applications

Antenna  from Linx Technologies

The ANT-LPX-FPC-100 from Linx Technologies is a Flexible Embedded Multiband LTE-M and NB-IoT Antenna for LTE bands 5, 8, 12, 13, 14, 17, 20, 28, while also supporting low-power, wide-area (LPWA) networking at 868 MHz and 915 MHz and WiFi/ WLAN applications at 2.4 GHz. This linear polarized antenna delivers a peak gain of over 3.1 dBi with an efficiency of up to 71% and can handle 2 watts of power.
Download Datasheet | Product Details
RF Test Set
Wireless Modular Test Set for Femtocell Manufacturing

RF Test Set  from Keysight Technologies

The E6650A EXF Wireless Test Set from Keysight is a one-box tester dedicated to femtocell manufacturing. The EXF is validated with the latest WLAN and cellular chipsets, including LTE and LTE-A. Its scalable design allows up to 4 TRX per chassis to enable parallel testing of multiple femtocells. It can be used to test signals up to 6 GHz with 80/160 MHz bandwidth on each TRX.
Download Datasheet | Product Details
Signal Generator
Low Cost Vector Signal Generators up to 6 GHz

Signal Generator  from Tektronix, Inc.

The TSG4100A Series from Tektronix, Inc. are affordable high-performance signal generators that support both analog and digital modulation. They are available in three frequency configurations DC to 2 GHz, 4 GHz, and 6 GHz. The instruments provide spur-free outputs with low phase noise (113 dBc/Hz at 1 GHz), outstanding amplitude accuracy (+/- 0.4 dB at 1 GHz) and excellent frequency resolution.
Download Datasheet | Product Details
Block Up Converter
50 W X-band GaN BUC for VSAT Applications

Block Up Converter  from Alga Microwave

The ALGA-50W from Alga Microwave is an X-band GaN BUC designed for VSAT and mobile station applications. It upconverts an input frequency from 950-1450 MHz to an output frequency from 7.9-8.4 GHz. The device provides 50 W of saturated output power (25 W linear) with a gain of 60 dB. It operates on two sets of DC (18-36 V) and (36-72 V) input voltage and consumes up to 250 W of power.
Download Datasheet | Product Details
RFID Tag IC
Long-Range Passive CMOS RFID Tag IC

RFID Tag IC  from EM Microelectronic

The EM4237SLIC/SLIX is a Long-Range Passive CMOS RFID Tag IC intended for use in applications that require contactless read/write memory with a certain level of security based on 32-bit password authentication. It offers a high level of flexibility in terms of memory management and access conditions. A memory block can be read/write protected and/or locked separately.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
About everything RF
everything RF is the leading website for the RF & Microwave Industry. We keep you up to date with the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]