PREV 15 July, 2020 NEXT

New RF and Microwave Products this Week

15 July, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 15 July, 2020
 
Sponsored by EMC Directory
 
 
 
New RF and Microwave Products this Week
RF Transistor
1200 Watt LDMOS Power Transistor from 10 to 700 MHz

RF Transistor  from Ampleon

The BLF978P from Ampleon is an LDMOS Power Transistor that operates from 10 to 700 MHz. It delivers a P1dB of 1200 watts with a power gain of over 23 dB and a drain efficiency of 80.6%. The device requires a supply voltage of 50 V and has integrated ESD protection. This transistor is available in a flanged balanced ceramic package and is ideal for use in broadcast transmitters, and for ISM applications.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Vector Network Analyzer from 9 kHz to 4.5 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The S5045 from Copper Mountain Technologies is a 2-Port Vector Network Analyzer that operates from 9 kHz to 4.5 GHz. It has a dynamic range of 130 dB (10 Hz IF BW) and can be used to measure all four S parameters (S11, S21, S12, and S22). The output power of this VNA can be adjusted from -55 dBm to 5 dBm and has a measurement speed of 70 µs.
Download Datasheet | Product Details
RF Module
868 MHz LPWAN Module Based on MIOTY Technology

RF Module  from Radiocrafts

The RC1882CEF-MIOTY1 from Radiocrafts is an RF Module based on MIOTY Technology that operates at 868 MHz. MIOTY is a low-power, wide-area network (LPWAN) protocol that was designed to have the best-in-class reliability and scalability of all available LPWAN technologies today to support massive industrial and commercial IoT deployments.
Download Datasheet | Product Details
Front End Module
5 GHz Ultra-Linear WLAN Front-End Module

Front End Module  from Skyworks Solutions

The SKY85746-11 from Skyworks is an Ultra-Linear WLAN Front-End Module with an integrated log detector that operates at 5 GHz. This module consists of an SPDT transmit/receive switch, a low-noise amplifier with bypass, and a power amplifier. It delivers a transmit gain of 32 dB and a receive gain of 13 dB. The FEM is intended for mobile/portable 802.11ax 1024 QAM applications and systems.
Download Datasheet | Product Details
Wireless SoC
2.4 GHz Wi-Fi SoC for Linux Based IoT Applications

Wireless SoC  from Qualcomm

The QCA4531 from Qualcomm is a two-stream (2x2) 802.11b/g/n single-band programmable Wi-Fi SoC with a channel bandwidth of 20 and 40 MHz. This SoC has an integrated PA that produces an output power of 20 dBm, integrated LNA, and requires a supply voltage of 3.3V. It is ideal for smart homes, Wi-Fi repeaters, smart appliances and IoT gateway applications.
Download Datasheet | Product Details
RF Cable
50 GHz Thermal-Vacuum Cables for Altitude Testing

RF Cable  from MegaPhase

The Thermal VAC cables from MegaPhase are Thermal Vacuum Cables that operate from 0.3 to 50 GHz. These cables are manufactured specifically for users that need to test space or airborne systems and components. The cables have a shielding effectiveness of -110 dB and a VSWR of less than 1.50:1. They have a propagation velocity of 69%, a time delay of 1.47 ns/ft, and a capacitance of 95.1 pF/m.
Download Datasheet | Product Details
RF Amplifier
2000 W Pulsed Solid-State Microwave Amplifier from 1 to 2 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 200SP1G2 from AR RF/Microwave Instrumentation is a Solid-State Microwave Amplifier that operates from 1 to 2 GHz. It delivers more than 2000 W of pulsed output power, has a P1dB of 1600 W, and a gain of 63 dB (±1.5 dB gain flatness). The amplifier has an IP3 of 67 dBm, -60 dBc spurious, and up to 18 dBc harmonic distortion.
Download Datasheet | Product Details
Sponsored by Digi-Key
ADIS1650/05/07
ADI ADIS16500/05/07 Precision Miniature MEMS IMU Available Now from Digi-Key
The ADIS1650/05/07 is a precision, miniature microelectromechanical system (MEMS) inertial measurement unit (IMU) that includes a triaxial gyroscope and a triaxial accelerometer. Each inertial sensor in the ADIS1650/05/07 combines with signal conditioning that optimizes dynamic performance. Click here to learn more.
 
TCXO
High Stability 400 MHz TCXO

TCXO  from Dynamic Engineers

The TCXO2522BJ-400MHz-A-V from Dynamic Engineers is a TCXO that operates at 400 MHz. It provides a sinewave output and has frequency stability of ±1.0 ppm over a temperature range from -40°C to +85°C. The device has a phase noise of -145 dBc/Hz at 10 MHz offset and a control voltage from +0.5V to +4.5V. It requires a 5 V supply voltage and consumes up to 100 mA current.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
30 W Hybrid Coupler from 11 to 17 GHz

90 Degree Hybrid Coupler  from UMCC

The HC-G000-QS from UMCC is a 90 Degree Hybrid Coupler that operates from 11 to 17 GHz. This coupler provides 3.3 dB ± 0.8 dB of coupling with isolation of over 15 dB. It can handle up to 30 W of CW power and has a VSWR of 1.45:1. This coupler is available in a module with SMA - Female connectors that measures 0.6 x 1.1 x 0.38 inches. It can be used for both commercial and military applications.
Download Datasheet | Product Details
RF Switch
SPDT Reflective Switch from 800 to 2700 MHz

RF Switch  from JFW Industries

The 50S-1820 from JFW Industries is an SPDT Reflective Switch that operates from 800 to 2700 MHz. This solid-state switch has an insertion loss of less than 1.2 dB, isolation of over 75 dB, and switching speed of less than 10 us. It can handle up to 100 Watts of input power and has a VSWR of less than 1.4:1. The device operates over a DC supply voltage of 5-15 V and consumes less than 80 mA of current.
Download Datasheet | Product Details
RF Transceiver
GaN Transmit/Receive Module from 1.2 to 1.4 GHz

RF Transceiver  from RFHIC

The RFMR13-LTRM-250-200B from RFHIC is a GaN Transmitter/Receiver Module that operates from 1.2 to 1.4 GHz. This L-band transceiver delivers an output power of 250 watts with a Tx gain of 52 dB. It has a duty cycle of 10% and a pulse width of 2000 µs. On the Rx side, it provides a gain of 45 dB with a noise figure of less than 2.5 dB.
Download Datasheet | Product Details
Band Pass Filter
Ceramic Band Pass Filter from 5925 to 7125 MHz for Wi-Fi 6 Applications

Band Pass Filter  from Johanson Technology

The 6530BP44A1190 from Johanson Technology is a Ceramic Band Pass Filter with a passband from 5925 to 7125 MHz. It can handle up to 3 W of input power, has an insertion loss of 2.3 dB, and a ripple factor of 1.9 dB. This filter provides an attenuation of more than 33 dB from 30 to 5650 MHz and more than 6 dB from 8250 to 14210 MHz.
Download Datasheet | Product Details
Diode Detector
Tunnel Diode Square Law Detector MMIC from 75 to 110 GHz

Diode Detector  from HRL Laboratories

The V1A from HRL Laboratories is a Tunnel Diode Square Law Detector that operates from 75 to 110 GHz. This W-band detector diode MMIC is fabricated using HRL's advanced InAs/GaAlSb processes that is AS9100B certified. The zero bias diode produces a DC voltage (0.2 V) proportional to input power (-10 dBm) with high sensitivity (15 V/mW).
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 1 to 18 GHz

RF Amplifier  from AmpliTech

The AWLN-35-01001800-1520-D4 from AmpliTech is a Low Noise Amplifier that operates from 1 to 18 GHz. The amplifier provides a gain of more than 35 dB (±2.5 dB gain flatness) with a noise figure of 1.3 dB and has a P1dB of +20 dBm. It can handle up to +13 dBm of CW input power and has a VSWR of 2.5:1. This LNA has been developed using state-of-the-art pHEMT technology.
Download Datasheet | Product Details
Sponsored by Digi-Key
AD242x
ADI AD242x A²B® Audio Bus Transceiver Available Now from Digi-Key
The AD242x A²B Automotive Audio Bus® technology provides a multichannel, I2S/TDM link over distances of up to 15 meters between nodes. It embeds bidirectional synchronous data, clock, control data, and power onto a single, differential wire pair. A²B is a single master, multiple slave system. Click here to learn more.
 
RF Amplifier
125 W Microwave Power Module from 30 to 38 GHz

RF Amplifier  from dB Control

The dB-3201H from dB Control is a Microwave Power Module (MPM) that operates from 30 to 38 GHz. It provides 125 W of Pulsed/CW output power with a gain of 51 dB and has a noise power density of -20 dBm/MHz. This MPM is a power amplifier that has a Parallel Resonant Frequency of 10 kHz and harmonics of up to -10 dBc. It consumes up to 900 W of power and has a VSWR of less than 2.5:1.
Download Datasheet | Product Details
Block Up Converter
25 W X-Band BUC from 7.9 to 8.4 GHz

Block Up Converter  from Comtech Xicom Technology

The XTSLIN-25X-B1 from Comtech Xicom Technology is an X-band Solid State BUC that up-converts an input frequency from 950-1450 MHz to an output frequency from 7.9-8.4 GHz. The device includes an SSPA which provides 25 W of linear output power and has a gain of 55 dB. It requires a DC supply of 22-56 V and draws a linear power of 140 W.
Download Datasheet | Product Details
Waveguide Circulator
2.998 GHz High Power 4-port Waveguide Circulator

Waveguide Circulator  from EM Design

The 102637D from EM Design is a 4-port Waveguide Circulator that operates at a center frequency of 2.998 GHz. This high power circulator can be optimized for various other frequencies including 2.856 GHz. This S-band circulator can handle an average power of 70 KW and peak power of 15 MW. It has an insertion loss of less than 0.25 dB, isolation of over 32 dB, and a VSWR of less than 1.1:1.
Download Datasheet | Product Details
Power Divider
2-Way Power Divider from 1100 to 1650 MHz for GNSS Application

Power Divider  from Microlab

The D2-42FN from Microlab is a 2-Way Wilkinson Power Splitter that operates from 1100 to 1650 MHz. It can handle up to 0.25 W of input power, has an insertion loss of less than 1 dB, a split loss of 3 dB, and provides isolation of 25 dB. This splitter has an amplitude balance of 0.3 dB and a VSWR of less than 1.25:1.
Download Datasheet | Product Details
Antenna
2G/3G/4G/5G Outdoor Antenna for M2M Applications

Antenna  from Airgain

The M2M SN Next from Airgain is an Outdoor Antenna that operates from 617-960 MHz, 1427-1600 MHz, 1700-2700 MHz, 3550-3700 MHz, and 5150-5850 MHz. It covers 2G, 3G, 4G/LTE, and 5G (Band 71, LTE, CBRS, LAA) bands. This IP67-rated antenna delivers a peak gain of over 3.4 dBi and has been designed to mount externally to an M2M or IoT enabled asset.
Download Datasheet | Product Details
Base Station Antenna
Tri-Band Sector Antenna for Outdoor Applications from 1.15 to 8.6 GHz

Base Station Antenna  from Cobham Antenna Systems

This MSA3-1.3V-4.8V-8.4V/2060 from Cobham is a Triple-band Sector Antenna that operates from 1.15 - 1.40 GHz, 4.4 - 5.1 GHz, and 8.1 - 8.6 GHz. This linearly polarized antenna delivers a gain of over 11.1 dBi and can handle up to 30 watts of power. It has a VSWR of 2:1 and a front to back ratio of over 15 dB.
Download Datasheet | Product Details
Up Converter
Three-Stage PXI Upconverter from 1 MHz to 3.9 GHz

Up Converter  from SignalCore

The SC5405A from SignalCore is a Triple-Stage Upconverter with an output frequency from 1 MHz to 3.9 GHz. Designed to convert low-frequency broadband IF signals to higher frequency RF signals, this superheterodyne upconverter has 3rd order linearity and noise performance that rival direct-conversion devices, but without image and in-band LO leakages inherent to them.
Download Datasheet | Product Details
RFID Tag IC
UHF RFID Tag IC from 840 to 960 MHz

RFID Tag IC  from Alien Technology

The Higgs4 from Alien Technology is a UHF RFID Tag IC that operates from 840 to 960 MHz. This highly-integrated single chip has a read sensitivity of up to -16.8 dBm and a write sensitivity of up to -13.8 dBm. It has an NVM/RAM memory of 448 bits, an EPC memory of up to 128 bits, 128 user bits, and a TID memory of 64 bits.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]