PREV 5 Aug, 2020 NEXT

New RF and Microwave Products this Week

5 Aug, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 5 Aug, 2020
 
Sponsored by PCB Directory
 
 
 
New RF & Microwave Products this Week
Band Pass Filter
10 W Cavity Bandpass Filter from 11.7 to 14.500 GHz

Band Pass Filter  from Mini Circuits

The ZVBP-13R1G-S+ from Mini-Circuits is a Cavity Band Pass Filter with a passband from 11700 to 14500 MHz. It has stopbands from DC to 11000 MHz and 15000 to 22000 MHz. The filter has an insertion loss of less than 2 dB in the passband and attenuation of over 35 dB in stopbands and can handle 10 W of input power. Low insertion loss combined with excellent power handling makes it well-suited for transmitter and receiver front ends.
Download Datasheet | Product Details
Waveguide Attenuator
60 dB Ka-Band Variable Attenuator from 26.5 to 40 GHz

Waveguide Attenuator  from ERAVANT

The STA-60-28-D5 from ERAVANT is a Ka-Band Direct Reading Attenuator that operates from 26.5 to 40 GHz. It has a total attenuation range of 60 dB with a 0.01 dB step size from 0 to 20 dB attenuation and a 0.1 dB step size from 20 to 60 dB attenuation. The device has an insertion loss of 0.5 dB and a return loss of 22 dB. It can handle up to 250 mW of pulsed, 150 mW of CW, and 1000 mW of peak input power.
Download Datasheet | Product Details
RF Amplifier
Tri-Band Bidirectional Amplifier from 1350 to 4990 MHz

RF Amplifier  from NuWaves Engineering

The NW-BA-SCISR-20-M02 from NuWaves is a Tri-Band Bidirectional Amplifier that operates in the C, L & S Bands. In the C-band, it operates from 4400 to 4990 MHz, provides a saturated output power of 10 W with a gain of 10 dB. In the L-band, it operates from 1350 to 1390/ 1755 to 1850 MHz and provides a saturated output power of 20 W with a gain of 17 dB. In the S-band, it operates from 2025 to 2500 MHz, provides a saturated output power of 20 W with a gain of 15 dB. It is designed to support secure CDL ISR (SCISR) software-defined radio communications.
Download Datasheet | Product Details
Signal Generator
Benchtop Vector Signal Generator from 4 kHz to 3/6/7.125 GHz

Signal Generator  from Rohde & Schwarz

The R&S®SMCV100B from Rohde & Schwarz is a Vector Signal Generator that operates from 4 kHz to 3 GHz (6/7.125 GHz options also available). It provides up to 25 dBm of output power, has a modulation bandwidth of up to 240 MHz and a settling time of 5 ms. The device has an SSB phase noise of less than -100 dBc (20 kHz offset) at 2.5 GHz and ACLR of -65 dBc at 5 MHz offset.
Download Datasheet | Product Details
Vector Network Analyzer
Compact USB VNA from 9 kHz to 6.5 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The S5065 from Copper Mountain Technologies is a compact 2 port VNA that operates up to 6.5 GHz. It can measure all four S parameters S11, S12, S21, S22 and provides a wide variety of analysis capabilities, including time-domain with gating and frequency offset modes. The VNA can be controlled using a software application that runs on a Windows PC, laptop, or tablet, connecting to the measurement hardware via the USB interface.
Download Datasheet | Product Details
RF Cable
70 GHz Micro Coaxial Cable for 5G and Telecom Applications

RF Cable  from Times Microwave Systems

The PhaseTrack® 047 from Times Microwave Systems is a Micro Coaxial Cable that operates up to 70 GHz. Originally designed for space flight applications, this high-performance cable easily accommodates densely packed in-the-box applications. This compact, phase stable, and highly flexible cable have a bend radius of 0.25 inches and a diameter of 0.06 inches.
Download Datasheet | Product Details
RF Cable
110 GHz Semi-Rigid Coaxial Cables

RF Cable  from MegaPhase

The Semi-Rigid Cables from MegaPhase operate from 0.3 to 110 GHz. They are available in different frequency configurations, each with a different part number - SR047: 110 GHz, SR034, SR086: 50.0 GHz, SR141: 34.0 GHz, SR250: 18.0 GHz. The cables have a shielding effectiveness of -110 dB and a VSWR of less than 1.6:1. They have a propagation velocity of 69%, a time delay of 1.47 ns/ft, and a capacitance of 9 pF/m.
Download Datasheet | Product Details
Featured Interview
Aashish Mehta - CEO and Co-Founder, TransferFI
Wireless Power Solutions for Industrial IoT
everything RF interviewed Mr. Ashish Mehta, the CEO and Co-Founder of TransferFI, a company that is dedicated to creating long-range, safe, and efficient Wireless Power Solutions for Industry 4.0. Click here to read the interview.
 
RF Transceiver
Dual Channel RF Transceiver from 30 to 6000 MHz

RF Transceiver  from Analog Devices

The ADRV9002 from Analog Devices is a Dual Channel RF Transceiver that operates from 30 to 6000 MHz and covers the UHF, VHF, licensed and unlicensed cellular bands, industrial, scientific and medical (ISM) bands. This highly-integrated transceiver has dual-channel transmitters, dual-channel receivers, integrated synthesizers, and digital signal processing functions.
Download Datasheet | Product Details
RF Amplifier
90 kW Solid-State GaN Power Amplifier from 5.2 to 5.9 GHz

RF Amplifier  from Empower RF

The 2225 from Empower RF Systems is a Solid-State Class AB Pulsed Power Amplifier that operates from 5.2 to 5.9 GHz. It delivers more than 90 kW of peak pulsed output power and has a gain of more than 80 dB. The amplifier has a duty cycle from 0.5 to 20 %, a pulse width from 0.2 to 500 µs at 20% duty cycle, and a pulse rise/fall time of 25 ns. It has a 2nd harmonic of -40 dBc and spurious of -60 dBc.
Download Datasheet | Product Details
RF Amplifier
1500 W GaN SSPA from 2700 to 3700 MHz

RF Amplifier  from RFHIC

The RRP27371K5-30 from RFHIC is a GaN Solid-State Power Amplifier that operates from 2700 to 3700 MHz. The amplifier provides an output power of 1500 W with a gain of 30.7 dB (1 dB flatness) and an efficiency of 35%. It exhibits a pulse width of 200 µs and has a duty cycle of 10 %. This pallet amplifier is fabricated using RFHIC’s cutting edge GaN HEMTs technology which provides excellent thermal stability in a small form factor.
Download Datasheet | Product Details
RF Amplifier
150 W GaN SSPA from 9.6 to 9.9 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP5055P-SSC from Exodus Advanced Communications is a Solid-State GaN Power Amplifier that operates from 9.6 to 9.9 GHz. It delivers a peak power of 150 W with a gain of more than 52 dB. This class AB amplifier exhibits a pulse width of 5-50 µs and has a duty cycle of 20%. It requires a DC supply voltage of 28 V and consumes 15 A of current.
Download Datasheet | Product Details
GNSS System on Chip
L1/L5 Band GNSS SoC for Smartphones and Wearables Devices

GNSS System on Chip  from Broadcom

The BCM47765 from Broadcom is a GNSS SoC (System on Chip) that supports GPS, GLONASS, NAVIC, BeiDou, Galileo, SBAS, and QZSS in both the L1/ B1/E1 and L5/E5a/B2a frequency bands. This SoC is integrated with a sensor hub microcontroller which has a dual-processor architecture (Arm CM4+CM0) that ensures each task is handled in the most power-efficient manner.
Download Datasheet | Product Details
Wireless SoC
Bluetooth 5.2 SoC for Ultra-Compact RF Modules

Wireless SoC  from Nordic Semiconductor

The nRF52805 from Nordic Semiconductor is a Bluetooth 5.2 System-on-Chip (SoC) which is designed for small two-layer PCB designs. This SoC has been developed for cost-constrained applications and is the perfect choice for applications such as beacons, disposable medical devices, sensors, styluses, and presenters.
Download Datasheet | Product Details
RF Variable Attenuator
3-Bit AlGaAs PIN MMIC Digital Attenuator from 80 to 100 GHz

RF Variable Attenuator  from MACOM

The MAAD-011038-DIE from MACOM is a 3-Bit AlGaAs PIN MMIC Digital Attenuator that operates from 80 to 100 GHz. It has an attenuation range of 7 dB with a 1 dB LSB and has an insertion loss of 5 dB. The device can handle up to 29 dBm of input power, has an input IP3 of 38 dBm and control voltage from -5 to 1.7 V.
Download Datasheet | Product Details
Sponsored by PCB Directory
 
 
 
RF Capacitor
Metal Oxide Semiconductor Capacitors from 1 to 1000 pF

RF Capacitor  from AVX Corporation

The MS Series from AVX Corporation are Metal Oxide Semiconductor Capacitors with capacitance values from 1 to 1000 pF. These High Q capacitors operate over a frequency range of DC to 20 GHz. MOS Capacitors are Single Layer Capacitors (SLCs) that use silicon dioxide to produce small, high Q, temperature stable, high breakdown voltage, low leakage capacitors.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-S870 from RF Electronics is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides isolation of more than 90 dB. The enclosure has shielded power filters for providing power connections in the box while blocking all wireless signals. It has a number of I/O interface options that include HDMI, RJ45, USB, DB9, VGA, DB25, and AC/DC.
Download Datasheet | Product Details
RF Amplifier
100 W Solid-State Power Amplifier from 1 to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 100S1G6AB from AR RF/Microwave Instrumentation is a solid-state broadband amplifier that operates from 1 to 6 GHz. It provides more than 100 W of CW output power with a gain of 50 dB (1.5 dB gain flatness). The amplifier has an IP3 of 56 dBm and a VSWR of 2:1. It has IEEE-488, RS-232, USB 2.0 and Ethernet ports for remote interfacing.
Download Datasheet | Product Details
Directional Coupler
300 W Directional Couplers from 698 to 2690 MHz

Directional Coupler  from Fiplex Communications

The DC-W2x RSA Series from Fiplex are Directional Couplers that operate from 698 to 2690 MHz. They are available in standard coupling values of 6 dB, 10 dB, 15 dB, 20 dB, and 30 dB with the isolation of up to 45 dB. The couplers have a low insertion loss of 0.4 dB and a VSWR of 1.3:1. They can handle up to 300 W of average power and are available in a module with N-Type Female connectors.
Download Datasheet | Product Details
Power Divider
6 Way Power Divider/Combiner from 5 to 500 MHz

Power Divider  from MECA

The 806-4-0.252WWP from MECA is a 6 Way power divider/combiner that operates from 5 to 500 MHz. The divider can handle up to 2 W of power with isolation of over 25 dB, an insertion loss of under 1.3 dB and a VSWR of 1.20:1. It is available with N-Type female Brass, Albaloy connectors.
Download Datasheet | Product Details
Directional Coupler
10 dB Directional Coupler from 2 to 52 GHz

Directional Coupler  from Fairview Microwave

The FM2CP1134-10 from Fairview Microwave is a Directional Coupler that operates from 2 to 52 GHz. It has a coupling factor of 10 dB with directivity of 12 dB and an insertion loss of less than 3 dB. The coupler can handle up to 20 W of CW input power, 300 W of peak input power, and has a VSWR of 1.6:1.
Download Datasheet | Product Details
SATCOM Transceiver
Ka-Band SATCOM Transceiver Module

SATCOM Transceiver  from Skyware Technologies

The DRC 3500 from Skyware Technologies is a Ka-Band SATCOM Transceiver that has a Tx frequency from 29 to 31 GHz and Rx frequency from 19.2 to 21.2 GHz. This device provides an output power of more than 37 dBm at the Tx with a gain of 58 dB. The transceiver operates over commercial and military Ka-Band frequencies with electronic sub-band switching.
Download Datasheet | Product Details
Low Noise Block
Ku-Band Low Noise Block from 10.7 to 12.75 GHz

Low Noise Block  from Orbital Research

The Ku MULTILO EXT REF from Orbital Research is a Ku-Band Low Noise Block that accepts input frequencies from 10.7-12.75 GHz and down-converts them to 950-2150 MHz with a LO Frequency of 9.75-11.30 GHz. This LNB has a conversion gain of 55 dB and with a noise figure of less than 0.8 dB. It draws up to 350 mA of current while operating over a 17-24 VDC supply.
Download Datasheet | Product Details
SATCOM Antenna
1.3 m Flyaway Satellite Terminal for X, Ku and Ka Bands

SATCOM Antenna  from Tampa Microwave

The TM130 from Tampa Microwave is a 1.3m Flyaway Satellite Terminal that supports X, Ku, Ku-30B, and Ka-bands (military and commercial). It delivers high-speed broadband access for a wide range of critical missions. It is designed for quick deployment, rapid set up, minimal configuration time, and excellent portability. The TM130 can operate for up to 2 hours from a single BB-2590 battery.
Download Datasheet | Product Details
Receiver
434 MHz UHF Narrow Band Receiver Module

Receiver  from Circuit Design

The CDP-RX-07M from Circuit Design is a UHF Narrow Band FSK Receiver Module that has been designed to operate in the 434 MHz ISM band. This low-power module contains most of the components necessary for radio transmission in a compact housing. The operating RF channel can be selected from 4 preset frequency channels selected through the use of jumpers.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, articles, white papers and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]