PREV 12 Aug, 2020 NEXT

New RF and Microwave Products this Week

12 Aug, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 12 Aug, 2020
 
Sponsored by I-PEX
 
 
 
New RF & Microwave Products this Week
RF Variable Attenuator
6-Bit Digital Step Attenuator from 9 kHz to 45 GHz

RF Variable Attenuator  from pSemi, A Murata Company

The PE43614 from pSemi is a 6-Bit Digital Step Attenuator that operates from 9 kHz to 45 GHz. It has an attenuation range of 31.5 dB with a step size of 0.5 dB. This DSA features glitch-safe attenuation state transitions and has a control voltage of 1.8 V with an optional VSS_EXT bypass mode to improve spurious performance, making this device ideal for test and measurement, point-to-point communication systems, and very small aperture terminals (VSAT).
Download Datasheet | Product Details
Tunable Filter
Miniaturized High-Power 7-Channel Filter from 225 to 512 MHz

Tunable Filter  from Menlo Micro

The MM6005 from Menlo Micro is a Miniaturized 7-Channel UHF Filter based on their breakthrough Ideal Switch™ technology that provides a seven-channel discrete tuning range from 225-512 MHz. This high power filter can handle up to 60 W of input power and has an insertion loss of 1.5 dB at 512 MHz. It is suitable for military communications, EW systems, frequency mitigation, and amplifier filtering applications.
Download Datasheet | Product Details
Cellular Module
5G Sub-6 GHz Module for NSA/SA Networks

Cellular Module  from SIMCom

The SIM8202G-M2 from SIMCom is a Multi-Band 5G module that supports NSA/SA networking and covers most Sub-6GHz (FR1) frequency bands across major network carriers around the world. The module uses a new 4-antenna design, which effectively increases communication capacity, sends and receives data in an active manner, and maintains high data speed and stability. It has a sub-6G downlink data rate of 2.4 Gbps and an uplink data rate of 500 Mbps.
Download Datasheet | Product Details
Up Converter
Q/V Band RF Upconverter from 36 to 56 GHz

Up Converter  from Rohde & Schwarz

The R&S®SZV100A from Rohde & Schwarz is a Q/V Band RF Upconverter that can be used for testing broadband transponders in the payloads of very high throughput satellites. With 2 GHz modulation bandwidth, the R&S SZV100A covers the entire frequency range from 36 GHz to 56 GHz. The upconverter provides a high output power up to +16 dBm.
Download Datasheet | Product Details
RF Amplifier
2-Stage RF Amplifier from 1.8 to 5 GHz for 5G MIMO Systems

RF Amplifier  from Renesas

The F1490 from Renesas is a 2-Stage RF Amplifier that operates from 1.8 to 5 GHz. It delivers an OP1dB of 24 dBm with two selected gain modes of 35.5 dB and 39.5 dB and has a noise figure of 2.5 dB. This amplifier is ideal for 5G Sub-6 GHz massive MIMO, wireless infrastructure base stations, FDD or TDD systems, point-to-point infrastructure, public safety infrastructure, military handhelds, repeaters, DAS, and general-purpose RF applications.
Download Datasheet | Product Details
RF Amplifier
Low Noise Cryogenic Amplifier from 4 to 10 GHz

RF Amplifier  from AmpliTech

The APTC3-04001000-1K00-D4-V from AmpliTech is a Low Noise Cryogenic Amplifier that operates from 4 to 10 GHz. It provides a gain of 42 dB, has a noise temperature of 25 degree K at +23 degree C case temperature across the band, and a P1dB of -6 dBm. The LNA can handle up to -10 dBm of CW input power and requires a single +0.7 V bias voltage.
Download Datasheet | Product Details
RF Amplifier
GaAs Power Amplifier MMIC from 5 to 18 GHz

RF Amplifier  from Microwave Systems JSC

The MC120-2 from Microwave Systems JSC is a GaAs Power Amplifier MMIC that operates from 5 to 18 GHz. It delivers an output power of up to 31 dBm with a small signal gain of over 9.5 dB. The device operates at a voltage of 8V and can handle up to 28 dBm of input power. This amplifier is available as a die and is ideal for fiber optic, microwave radio, radar systems, telecom infrastructure, test instrumentation, and VSAT applications.
Download Datasheet | Product Details
Sponsored by I-PEX
I-PEX
New 5G RF Connector from I-PEX
Introducing a new 5G solution, the MHF® 7S Micro-Coaxial RF Connector, from I-PEX. This innovative design gives unparalleled EMI performance in a small form factor. With a 1.5 VSWR max at 15 GHz, the MHF 7S solves 5G problems now. Click here to learn more.
 
RF Amplifier
Ka-Band GaN Power Amplifier from 34 to 36 GHz

RF Amplifier  from QuinStar Technology Inc

The QBP-35025055 from Quinstar Technology is a Ka-Band GaN Power Amplifier that operates from 34 to 36 GHz. It provides a saturated output power of 50 dBm with a gain of 55 dB. This solid-state amplifier requires a DC Supply between 28V to 48V and has a current consumption from 25 A to 14 A. The amplifier can be used in a wide range of applications like high-reliability communication links, radars and general test and measurement applications.
Download Datasheet | Product Details
Directional Coupler
20 dB Directional Coupler from 2 to 8 GHz

Directional Coupler  from Mesa Microwave

The MMCDC0208-20 from MESA Microwave is a Directional Coupler that operates from 2 to 8 GHz. This 20 dB coupler has a directivity of over 20 dB and an insertion loss of less than 0.4 dB. It can handle up to 50 watts of average power, 1kW of peak power, and has a VSWR of under 1.2:1. This RoHS-compliant coupler is available in a module with SMA-female connectors.
Download Datasheet | Product Details
Power Divider
2-Way Surface Mount Power Divider from 2800 to 4200 MHz

Power Divider  from BeRex, Inc.

The BD3526 from BEREX is a 2-Way Power Divider that operates from 2800 to 4200 MHz. It provides an insertion loss of 0.6 dB with isolation of over 25 dB. The divider has an amplitude balance of 0.15 dB and a phase balance of 0.4 degrees. The divider is fully passivated for enhanced performance and reliability and is ideal for WCDMA/LTE/5G wireless Infrastructure, base station infrastructure, and commercial/industrial/military wireless system applications.
Download Datasheet | Product Details
RF Amplifier
35 W GaN HEMT Power Amplifier from 6 to 18 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA601J025D from Wolfspeed is a GaN HEMT-based MMIC Power Amplifier that operates from 6 to 18 GHz. The PA provides an output power of over 35 watts with a power gain of 18 dB and an efficiency of up to 42%. It requires a supply voltage of 22 Volts and has a high breakdown voltage. This amplifier is ideal for jamming, test equipment, broadband and radar applications.
Download Datasheet | Product Details
RF Transistor
61 W LDMOS 2-Stage Power MMIC from 600 to 1000 MHz

RF Transistor  from Ampleon

The BLM9H0610S-60PG from Ampleon is a 2-Stage LDMOS Power MMIC that operates from 600 to 1000 MHz. It provides a P1dB of 61.4 W with a gain of 38.1 dB and has a drain efficiency of 69.1%. The device uses Ampleon’s state-of-the-art GEN9 HV LDMMIC technology and provides high section-to-section isolation enabling multiple transistor combinations along with integrated ESD protection.
Download Datasheet | Product Details
RF Variable Attenuator
95 dB Ethernet/USB Controlled Attenuator from 50 to 8000 MHz

RF Variable Attenuator  from Adaura Technologies

The AD-USB1AR38G95 from ADAURA Technologies is a Single Channel Ethernet/USB Controlled Attenuator that operates from 50 to 8000 MHz. It has an attenuation range from 0 to 95 dB with a step size of 0.25 dB. The attenuator has an insertion loss of 12.5 dB with isolation of 120 dB. The wide frequency range support makes this attenuator ideal for a number of applications including the new Wi-Fi 6E standard.
Download Datasheet | Product Details
RF Variable Attenuator
Variable Attenuator with Integrated Limiter from 14.65 to 15.35 GHz

RF Variable Attenuator  from Planar Monolithics Industries

The PLA-14D65G15G35G-20DB-SFF-250W is an Attenuator with integrated limiter that operates from 14.65 to 15.35 GHz. It has a 20 dB attenuation range with an insertion loss of 3.5 dB. The device can handle up to 250 watts of peak power (i.e a pulse width of 40 us) and an average power of up to 25 watts. The limiter is has a P1dB threshold of 5 dBm and a flat leakage of 50 mW. It is available in a module with SMA connectors at the RF ports and a TTL control interface.
Download Datasheet | Product Details
Sponsored by I-PEX
 
 
 
RF Variable Attenuator
Solid-State Programmable Attenuator from 200 to 6000 MHz

RF Variable Attenuator  from JFW Industries

The 50P-2057 from JFW Industries is a Solid-State Programmable Attenuator that operates from 200 to 6000 MHz. This USB-controlled device has eight individually controlled attenuation steps: 0.5, 1, 2, 4, 8, 16 and 32 dB to cover a total attenuation range from 0 to 95.5 dB in 0.5 dB steps. It has an insertion loss of less than 8 dB, VSWR of under 1.8:1, and a switching speed of up to 4 microseconds.
Download Datasheet | Product Details
Frequency Synthesizer
RF Synthesizer Module from 10 MHz to 2 GHz

Frequency Synthesizer  from Holzworth Instrumentation

The HSM2001B from Holzworth Instrumentation is an RF Synthesizer Module that operates from 10 MHz to 2 GHz. This microwave CW source is architected on a non-PLL based platform. It is based on a digital/analog hybrid design that provides excellent phase noise performance and spurious response, which compliment the phase coherent nature of these hybrid signal sources.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Modular VNA from 1 MHz to 43.5 GHz

Vector Network Analyzer  from Anritsu

The ShockLine™ ME7868A from Anritsu is a 2-port Modular Vector Network Analyzer that operates from 1 MHz to 43.5 GHz by utilizing Anritsu’s Extended-K™ components. Powered by the revolutionary PhaseLync™ technology, it enables engineers to synchronize two portable ShockLine MS46131A 1-Port VNAs and connect them directly to a DUT to conduct vector transmission measurements over distances of 100 meters or more.
Download Datasheet | Product Details
RF Module
Dual-Band Wi-Fi / Bluetooth 5.0 Module for IoT Applications

RF Module  from H&D Wireless

The SPB228 from H&D Wireless is Dual-Band Wi-Fi and Bluetooth 5.0 module built on a 28 nm process. It supports WLAN (802.11 a.b.g.n) 2x2 MU-MIMO dual-band (2.4 and 5 GHz) and Bluetooth (5 Classic and LE) for Linux and Android platforms. This low power module provides a feature-rich client solution with a nominal 867 Mbps (Wi-Fi) data rate and supports the concurrent or independent operation of WLAN and Bluetooth.
Download Datasheet | Product Details
RF Module
4x4 MU-MIMO Module for WiFi 6E Applications

RF Module  from Compex Systems

The PN02.7 from Compex is a Single-Band 4x4 MU-MIMO (802.11ax) wireless module that supports the 6 GHz (WiFi 6E) band. Based on Qualcomm's Atheros QCN9074 chipset, this module provides 23 dBm of power at 6 GHz (per chain) and uses multi-user beamforming technology to provide data rates of up to 4949 Mbps. It has a PCI Express 3.0 interface and supports the Orthogonal Frequency Division Multiplexing (OFDMA).
Download Datasheet | Product Details
Antenna
GNSS Chip Antenna from 1560 to 1605 MHz

Antenna  from Johanson Technology

The 1582AT54A0045 from Johanson Technology is a GNSS (GPS, GLONASS, Beidou, Galileo) Chip Antenna that operates from 1560 to 1605 MHz. It delivers a peak gain of 1.5 dBi, an average gain of -0.5 dBi with up to 82% of efficiency, and can handle 3 W of CW power. This antenna is available in a surface-mount package and can operate over a temperature range from -40 to +85°C.
Download Datasheet | Product Details
Low Noise Block
Ku-Band Block Downconverter from 10.7 - 11.7 GHz / 11.7 - 12.75 GHz

Low Noise Block  from ETL Systems

The FN-D-K1L1-24100-S5XX from ETL Systems is a Low Noise Block that accepts an input frequency from 10.7 - 11.7 GHz (Mode 1) / 11.7 - 12.75 (Mode 2) and downconverts them to 950 - 1950 MHz (Mode 1) / 950 to 2000 MHz (Mode 2). It provides an OP1dB of 17 dBm with a conversion gain of over 5 dB and a noise figure of 10 dB. The device requires an AC supply voltage of 85 to 264 V and consumes 150 W of power.
Download Datasheet | Product Details
OCXO
CMOS VCOCXO from 10 to 40 MHz for 5G Infrastructure

OCXO  from Suntsu Electronics Inc

The SOC09C Series from Suntsu Electronics are VCOCXOs that operate from 10 to 40 MHz. They provide a CMOS output, have a phase noise of -150 dBc/Hz at 1 kHz offset, and frequency stability of ±20 ppb over an operating temperature range from -40 to +95 °C. The oscillators require 3.3 V of supply voltage and have control voltage from 0 to 3.3 V. They have a rise/fall time of 5ns and a warm-up time of 3 minutes.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, articles, white papers, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]