PREV 7 Oct, 2020 NEXT

New RF and Microwave Products this Week

7 Oct, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 7 Oct, 2020
 
Sponsored by Rohde & Schwarz
 
 
 
New RF and Microwave Products this Week
Band Pass Filter
High-Performance BAW Filter for Band 41 5G Base Station Deployments

Band Pass Filter  from Qorvo

The QPQ1298 from Qorvo is a Bulk Acoustic Wave (BAW) Bandpass Filter with a passband from 2515 to 2675 MHz. It has an insertion loss of 2.5 dB in the passband and provides an attenuation of over 45 dB from 2400 to 2483.5 MHz. It is available in a compact 2 x 1.6 mm leadless SMT package and is ideal for sub-band 41 uplink/downlink, base station infrastructure and small cells.
Download Datasheet | Product Details
RF Transistor
300 W RF GaN Power Transistor from 2400 to 2500 MHz

RF Transistor  from NXP Semiconductors

The MRF24G300HS from NXP is an RF Power GaN Transistor that operates from 2400 to 2500 MHz. It provides an output power of 300 W with a gain of 15.2 dB and an efficiency of 73% while operating over a 50 V supply. This device is suitable for use in CW, pulse, cycling, and linear applications.
Download Datasheet | Product Details
RF Transistor
2.9 W GaN HEMT Power Amplifier from 0.5 to 3 GHz

RF Transistor  from Wolfspeed, A Cree Company

The CMPA0530002S from Wolfspeed is a GaN HEMT Power Amplifier that operates from 0.5 to 3 GHz. It provides a saturated output power of up to 2.9 W with a small signal gain of over 18 dB and has a PAE of up to 56.2%. The amplifier requires a DC supply of 28 V. It has been designed specifically for high efficiency, high gain, and wide bandwidth applications including ISM, EW, broadband amplifiers, and civil & military applications.
Download Datasheet | Product Details
RF Amplifier
GaN Hybrid Power Amplifier from 200 to 2000 MHz

RF Amplifier  from RFHIC

The TG2000-10 from RFHIC is a GaN Hybrid Power Amplifier that operates from 200 to 2000 MHz. It provides an output power of 6 W with a gain of up to 12 dB and has an average efficiency of 50%. The amplifier is designed using RFHIC’s GaN on SiC HEMT with a hybrid surface mount package and is attached to a copper sub-carrier.
Download Datasheet | Product Details
RF Spectrum Analyzer
Rugged 40 GHz Intelligent RF Receiver

RF Spectrum Analyzer  from CRFS

The RFeye Node 100-40 from CRFS is a Rugged Intelligent Wideband Receiver that operates from 9 kHz to 40 GHz. The receiver is a complete spectrum monitoring and geolocation system designed for remote deployment both indoors and outdoors and in hostile environments. Packaged in a compact, rugged and weatherproof housing, it has been optimized for size, weight and power (SWaP) and is simple to connect to power and network.
Download Datasheet | Product Details
Up Converter
RF Upconverter from 1 MHz to 3.9 GHz

Up Converter  from SignalCore

The SC5406B from SignalCore is a triple-stage, high-dynamic range, superheterodyne upconverter that converts an input IF frequency of 70 MHz to a tunable RF frequency from 1 MHz to 3.9 GHz. This upconverter has 3rd order linearity and noise performance that rivals direct-conversion devices but without images and in-band LO leakages inherent to them.
Download Datasheet | Product Details
Sponsored by Rohde & Schwarz
Rohde & Schwarz
Meet our new product family of 5G testing equipment
New technologies such as massive MIMO and the introduction of mmWave frequencies require more computing power and robust RF hardware. They also make over-the-air testing compulsory. Overcome these challenges with our new family of testing equipment perfected for 5G applications in development, QM acceptance testing and production. Click here to learn more.
 
RF Module
Bluetooth 5.2 Low Energy Modules for Advanced Applications

RF Module  from u-blox AG

The NORA-B10 Series from u-blox are Standalone Bluetooth 5.2 Low Energy Modules with an integrated MCU for industrial automation, medical and healthcare, smart cities, and smart buildings. These modules are built on the Nordic nRF5340 chip and have dual Arm® Cortex®-M33 processor cores with integrated flash and RAM memory.
Download Datasheet | Product Details
RF Module
Bluetooth 5.2 Module with Integrated Antenna

RF Module  from TAIYO YUDEN (U.S.A.) Inc

The EYSPBNZUA from Taiyo Yuden is a Bluetooth Low Energy (LE) Module that operates from 2402 to 2480 MHz. This Bluetooth v5.2 supports 2M / 1M / 500k / 125kbps / AoA / AoD. It has an ARM® Cortex M4F 32-bit processor with 512KB of flash memory and 128KB of RAM. It supports various interface options including USB, SPI, UART, etc.
Download Datasheet | Product Details
RF Module
Bluetooth (v5.1) + Thread (802.15.4) + NFC Module for Industrial IoT

RF Module  from Laird Connectivity

The BL653µ Series from Laird Connectivity are a Bluetooth (v5.1) + Thread (802.15.4) + NFC Modules which are designed for long-range Bluetooth LE and wireless industrial IoT applications. Based on Nordic's nRF52833 SoC, these modules provide a data rate of up to 2 Mbps while operating over a frequency range of 2.402 to 2.480 GHz.
Download Datasheet | Product Details
Multiplexer
Penta-Band Filter Module 826 / 920 / 1795 / 2045 / 2595 MHz

Multiplexer  from SRTechnology Corporate

The R03-M0826-01 from SRTechnology Corporate is a Penta-Band Filter Module with passbands from 790 to 862 MHz, 880 to 960 MHz, 1710 to 1880 MHz, 1920 to 2170 MHz, and 2500 to 2690 MHz. It can handle up to 20 W of input power per port, has an insertion loss of less than 0.6 dB, and provides a port to port rejection over 50 dB in the stopband.
Download Datasheet | Product Details
Integrated Microwave Assemblie
2-Channel Up/Down Converter with RF Frequency from 26 to 30 GHz and 36 to 40 GHz

Integrated Microwave Assemblie  from Taiwan Rapidtek Inc.

The RPC-MI04TNU-FR2-DB from Taiwan Rapidtek is a 2-Channel Up/Down Converter. Each channel has a different up/down conversion frequency - Channel 1 has an IF frequency from 2.5 to 6 GHz and RF frequency from 26 to 30 GHz and Channel 2 has an IF frequency from 3 to 6 GHz and RF frequency from 36 to 40 GHz.
Download Datasheet | Product Details
RF Cable
Phase and Temperature Stable Cables from DC to 110 GHz

RF Cable  from MegaPhase

The UltraPhase Series E Coaxial Cables from MegaPhase allows for phase and temperature stable transmissions at high frequencies ranging from DC to 110 GHz. They offer thermal stability without sacrificing insertion loss and phase stability versus flexure. This lightweight product line features linearity across a wide temperature range, without the notorious PTFE “knee” at ambient temperatures (+15 to +22 °C).
Download Datasheet | Product Details
Sponsored by Rohde & Schwarz
 
 
 
RF Amplifier
Low Noise Amplifier from 50 to 1000 MHz

RF Amplifier  from NuWaves Engineering

The HILNA V1 from NuWaves Engineering is a Low Noise Amplifier that operates from 50 to 1000 MHz. It provides a gain of more than 20 dB with a noise figure of less than 0.8 dB and has a P1dB of over 17 dBm. The amplifier requires a DC supply of 12 V and consumes less than 70 mA of current. It is designed to achieve a high gain while maintaining low noise and has a high third-order intercept point across the frequency band.
Download Datasheet | Product Details
RF Amplifier
Ka-Band GaN Power Amplifier from 34 to 36 GHz

RF Amplifier  from QuinStar Technology Inc

The QBP-35025055 from Quinstar Technology is a Ka-Band GaN Power Amplifier that operates from 34 to 36 GHz. It provides a saturated output power of 50 dBm with a gain of 55 dB. This solid-state amplifier requires a DC Supply from 28 to 48 V and has a current consumption of 14 to 25 A. It is available in a module that measures 14 x 7.1 x 3 inches (excluding the DC connector).
Download Datasheet | Product Details
RF Amplifier
3-Band Solid State Power Amplifier from 18 to 40 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP4037 from Exodus Advanced Communications is a Solid State Power Amplifier that operates in three bands (A, B, and C). In-band A, it operates from 18 to 26.5 GHz and provides a saturated output power of 10 Watts. In-band B, it operates from 26.5 to 31.5 GHz and provides a saturated output power of 8 Watts. In-band C, it operates from 31.5 to 40 GHz and provides a saturated output power of 8 Watts.
Download Datasheet | Product Details
RF Amplifier
400 W Ka-Band TWT Amplifier from 32 to 36 GHz

RF Amplifier  from dB Control

The dB-3861 from dB Control is a Ka-band TWT amplifier that operates from 32 to 36 GHz. The amplifier uses a periodic permanent magnet (PPM) for power amplification. It provides a peak output power of 400 W with a gain of over 56 dB. The unit has a pulse width from 0.2 to 50 µsec, a duty cycle of up to 25%, and a maximum PRF (Pulse Repetition Frequency) of 300 kHz.
Download Datasheet | Product Details
Microwave Generator
100 W, 2.45 GHz Microwave Generator for Medical Applications

Microwave Generator  from Emblation Microwave

The MSYS245 from Emblation Microwave is a highly efficient microwave generator that operates at 2.45 GHz. It delivers a variable output power of up to 100 W. This 60601 compliant microwave generator is ideal for hyperthermia and coagulation/ablation based procedures requiring low to moderate microwave power at 2.45 GHz.
Download Datasheet | Product Details
Antenna
4G/5G SMD Antenna from 600 to 3800 MHz

Antenna  from Antenova

The SR4L054 (Lepida) from Antenova is a Cellular 4G/5G Antenna that operates from 600 to 3800 MHz. The antenna can be used for cellular bands B71 (617-698 MHz), LTE 700, GSM850, GSM900, DCS1800, PCS1900, WCDMA2100, B40 (2300 - 2400 MHz), B7 (2500-2690MHz), and B78 (3300-3800MHz). This linearly polarized antenna delivers a peak gain of over 0.5 dBi with an average efficiency of more than 65%.
Download Datasheet | Product Details
Antenna
Isolated Magnetic Dipole Antennas from 2.4 to 8.5 GHz

Antenna  from Ethertronics

The 1001312 from Ethertronics are Ceramic Isolated Magnetic Dipole (IMD) Antennas that operate from 2.4 to 8.5 GHz. These antennas utilize patented IMD technology to deliver high performance in a small package. They are linearly polarized and deliver a gain of 1.88 dBi with an average efficiency of 62%. The antennas can handle up to 0.5 W of CW power and have a VSWR of less than 1.8:1.
Download Datasheet | Product Details
Antenna
Embedded Surface Mount Antenna for 5G-NR/4G /3G/2G

Antenna  from 2J Antennas

The 2JE21 from 2J Antennas is an Embedded Surface Mount Antenna that operates from 617-960, 1427-2690, 3300-5000, and 5150-5925 MHz. It supports 5G-NR, 4G LTE, FirstNet, CBRS, LPWA, CAT-X/CAT-Mx, CAT-NBx, and NB-IoT standards. This linearly polarized antenna delivers a peak gain of over 3.3 dBi and with an efficiency of up to 60.8% and can handle up to 25 W of input power.
Download Datasheet | Product Details
GPS/GNSS Antenna
High Precision GNSS Antenna for Autonomous Vehicle Navigation

GPS/GNSS Antenna  from Tallysman Wireless

The VSS6037L from Tallysman is a GNSS Precision Antenna with L-band Correction Sevices that operates from 1160 to 1300 MHz (Lower Band), 1539 to 1559 MHz (L-band corrections services), and 1559 to 1606 MHz (Upper Band). The patent-pending VSS6037L antenna employs Tallysman’s unique VeroStar™ technology, providing a high gain of more than 37 dB over the full GNSS spectrum.
Download Datasheet | Product Details
Cellular IoT Module
Quad-Band GSM Module with Integrated GNSS Receiver for IoT

Cellular IoT Module  from Telit Communications

The GE310 from Telit is a Quad-Band GSM/GPRS Module which is integrated with a Multi-constellation GNSS receiver and a Bluetooth transceiver. This module is recommended for new designs requiring quad-band GSM/GPRS coverage in a compact and robust package delivering easy integration thus reducing the impact on final application costs.
Download Datasheet | Product Details
RF Amplifier
50 W Broadband Power Amplifier from 2.5 to 6 GHz

RF Amplifier  from RFcore

The RCA2560H47D1 from RFCore is a broadband high power amplifier that operates from 2.5 to 6 GHz. It provides an output power of more than 50 W with a gain of over 48 dB. This amplifier requires a DC supply of 28 V and consumes up to 13 A of current. It is available in a module that measures 200 x 125 x 25 mm with SMA (F) connectors.
Download Datasheet | Product Details
RF Inductor
Thin Film Spiral Inductors from 1.2 to 2.8 nH

RF Inductor  from Passive Plus Inc

The PLS Series from Passive Plus are a Thin Film Spiral Inductors with an inductance from 1.2 to 2.8 nH. They operate from DC to 500 MHz with a Q factor of 14 @ 500 MHz and have 1.5 – 7 turns. These inductors consist of a thin film gold spiral pattern on a substrate and can be used in a wide variety of applications.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, white papers and more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]