1. everything RF
  2. RF Newsletters
more
PREV 12 Oct, 2020 NEXT

Latest News & White Papers this Week

12 Oct, 2020 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 12 Oct, 2020
 
Sponsored by Mouser
 
 
 
Latest News this Week
RIGOL Adds Vector Network Analysis Capability to their Realtime Spectrum Analyzers - RIGOL Technologies
Qorvo Ultra-Wideband Technology is Helping the World Get Back to Work - Qorvo
Murata Confirms Resonant XBAR RF Filters for 5G Meet Target Performance Specs - Resonant Inc
Holzworth Extends its Phase Noise Analyzer Portfolio to 50 GHz for 5G and Radar Applications - Holzworth Instrumentation
Quik-Pak Introduces RF-Capable Air-cavity QFN Packages for Millimeter-Wave Applications - Quik-Pak
StratEdge Introduces Hermetic QFN packages for Ka-Band 5G Applications - StratEdge
Northrop Grumman Advances Maritime Electronic Warfare Capability with a Contract from the US Navy - Northrop Grumman
26.5 GHz Intelligent RF Spectrum Recorder with 765 MHz Real-Time Bandwidth - Novator Solutions
NXP Introduces 2x2 Wi-Fi 6 + Bluetooth Solutions for Gaming, Audio, Industrial and IoT Markets - NXP Semiconductors
Amphenol RF Offering Tamper Resistant Connectors to Keep Sensitive Electronics Safe - Amphenol RF
ZigBee Alliance Launches Europe Interest Group - ZigBee Alliance
Isotropic Systems to Conduct Multi-Orbit Trials of Multi-Beam Antenna Technologies for U.S. Military - SES GS
More News
New White Papers
New VNA Technologies Enable Millimeter-Wave Broadband Testing to 220 GHz - Anritsu
Keeping Defense Platforms Alive in a World of Decreasing Semiconductor Availability - Teledyne e2v HiRel Electronics
5G Millimeter Wave Frequencies and Mobile Networks Technology Whitepaper - Remcom
Spectral Analysis with a Vector Network Analyzer - Copper Mountain Technologies
New Space Applications Add to Mix of Space-Qualified Crystal Oscillators - Q-Tech Corporation
More White Papers
Sponsored by Mouser
Mouser
High-reliability FAKRA Automotive Cable Assemblies in color-coded plastic housings
Amphenol RF FAKRA Automotive Cable Assemblies are designed to perform up to 6GHz and ensure reliable communication inside, to, and from vehicles. The series offers a variety of FAKRA connectors for PCB and antenna interfaces, as well as mixed dual coax/power FAKRA connectors. These connectors comply with USCAR 17 and 18. Click here to learn more.
 
On-Demand Webinar
Event Image
Innovation with Diamond Technology-Panel Discussion
Date: On-Demand
Location: Online
More Events
Featured Products this Week
RF Amplifier
25 W GaN MMIC Power Amplifier from DC to 6000 MHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA0060025F from Wolfspeed is a GaN HEMT based Power Amplifier MMIC that operates from DC to 6000 MHz. It delivers a saturated output power of 25 W with a gain of more than 15.5 dB and has an efficiency of up to 63%. The amplifier is based on GaN technology which offers a higher breakdown voltage, thermal conductivity, power density, and a wider bandwidth as compared to Si and GaAs transistors.
Download Datasheet | Product Details
Vector Network Analyzer
4-Port Vector Network Analyzer from 100 kHz to 9 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The C2409 from Copper Mountain Technologies is a 4-port modular vector network analyzer that operates from 100 kHz to 9 GHz. The VNA can measure all S parameters S11, S12, S21, S22, S44, and can be controlled using any Windows PC or laptop. It has a dynamic range of up to 162 dB (1Hz IF BW), the directivity of 46 dB, and sweep speeds of as low as 10 microseconds per point.
Download Datasheet | Product Details
Signal Generator
300 kHz to 8 GHz USB Controlled Signal Generator

Signal Generator  from Pico Technology

The PicoSource AS108 Agile Synthesizer from Pico Technology is a frequency synthesizer that operates from 300 kHz to 8 GHz. It is designed to meet the needs of both benchtop and integrated module applications. Its broad frequency range, fast settling, and programmable phase, frequency, and amplitude make it ideal for a wide range of applications, with the added advantages of low cost, small footprint, and 12 to 15 V power requirement.
Download Datasheet | Product Details
Power Divider
4-Way Power Divider from 15 to 40 GHz

Power Divider  from Pulsar Microwave

The PS4-52-452/13S from Pulsar Microwave is a 4-Way Power Divider that operates from 15 to 40 GHz. It can handle an input power of up to 10 W, has an insertion loss of less than 2 dB and an isolation of over 12 dB. The power divider has a VSWR of 1.9:1, an amplitude balance of 0.8 dB with a phase balance of 12°. It is available in a module with 2.92 mm connectors.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
90 Degree Hybrid Coupler from 10 to 40 GHz

90 Degree Hybrid Coupler  from KRYTAR

The 3100400 from Krytar is a 90 Degree Hybrid Coupler that operates from 10 to 40 GHz. It has a coupling factor of 3 dB, an insertion loss of less than 2 dB and provides isolation of more than 12 dB. The unit has an amplitude imbalance of ±0.7 dB, a phase imbalance of ±10 degrees, and is used in circuits requiring a balanced division of power into two transmission lines with 90-degree phase separation.
Download Datasheet | Product Details
Fixed Attenuator
100 W RF Attenuator from DC to 400 MHz

Fixed Attenuator  from API Technologies - Inmet

The Model TPA100 from API Technologies – Inmet is a Thick Film RF Attenuator that operates from DC to 400 MHz. It is available in 1, 2, 3, 4, 6, 10, and 20 dB attenuation configurations and has an accuracy of ±0.5 dB. The attenuator can handle an input power of up to 100 W and is designed to uniformly reduce the power of the RF signal while generating only a small reflection, even under maximum power conditions.
Download Datasheet | Product Details
RF Amplifier
100 W Solid-State Amplifier from 1 to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 100S1G6AB from AR RF/Microwave Instrumentation is a solid-state broadband amplifier that operates from 1 to 6 GHz. It provides more than 100 W of CW output power with a gain of more than 50 dB (1.5 dB gain flatness). The amplifier has an IP3 of 56 dBm and a VSWR of less than 2.0:1. It has IEEE-488, RS-232, USB 2.0, and Ethernet ports for remote interfacing.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
Front End Module
High Power LNA/Switch Module from 0.4 to 4 GHz

Front End Module  from MACOM

The MAIA-011002 from MACOM is a high power Switch-LNA module that operates from 0.4 to 4 GHz. This compact surface-mount module contains a PIN diode switch and two low noise amplifiers assembled in a 5 mm 32-lead HQFN plastic package. It is designed to be used at the input of the receive chain of TDD cellular base stations.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Voltage Controlled Oscillator from 8 to 16 GHz

Voltage Controlled Oscillator  from Synergy Microwave Corporation

The DCYS8001600-5 from Synergy Microwave is an X to Ku-Band Voltage Controlled Oscillator that operates from 8 to 16 GHz. It can be tuned over a voltage range from 0.5 to 15 V with a tuning sensitivity from 300 to 900 MHz/V and can deliver more than -1 dBm of output power. The oscillator has a phase noise of -94 dBc/Hz at a 100 kHz offset and provides a typical harmonic suppression of 17 dB.
Download Datasheet | Product Details
RF Spectrum Analyzer
Low Cost, Software-Upgradeable Spectrum Analyzer from 5 kHz to 3 GHz

RF Spectrum Analyzer  from Rohde & Schwarz

The FPC1500 from Rohde & Schwarz is a software-upgradeable spectrum analyzer that operates from 5 kHz to 1 GHz, which can be expanded to 2 GHz or 3 GHz (keycode upgrade concept). The device provides a low noise floor level of -150 dBm, which can be further extended to -165 dBm with an optional, keycode-activated preamplifier.
Download Datasheet | Product Details
RF Test Set
Small, Light and Economical Base Station Analyzer for 2G/3G/4G Applications

RF Test Set  from Anritsu

The MT8212E Cell Master Base Station Analyzer from Anritsu is a small, light, and economical solution for 2G/3G/4G, and WiMAX base station transmitter testing and ISDB-T and DVB-T/H digital broadcast field testing from 2 MHz to 4 GHz. It's ideal for installation and commissioning as well as for maintenance and troubleshooting.
Download Datasheet | Product Details
RF Variable Attenuator
Variable Rotary Attenuator from DC to 8 GHz

RF Variable Attenuator  from JFW Industries

The 50R-400 from JFW Industries is a variable rotary attenuator that operates from DC to 8 GHz. It has an attenuation range from 0 to 9 dB with 1 dB increments. This attenuator has an insertion loss of less than 0.6 dB, can handle 2 W of average input power and peak power of up to 200 W. The attenuator is available in a module with SMA (F) connectors.
Download Datasheet | Product Details
RF Amplifier
C-Band Super Low Noise Amplifier with Fault Detection

RF Amplifier  from AmpliTech

The APT3-05400590-1010-LS-D4-FAC from AmpliTech is a Low Noise Amplifier that operates from 5.4 to 5.9 GHz. It provides a P1dB of 12 dBm and a gain of 28 dB with a noise figure of less than 0.9 dB. An internal limiter at the input provides protection against up to 2W CW of RF input power over the full band. It is available in a module with SMA female connectors and is ideal for receiver front end, radar, Satcom, and test equipment applications.
Download Datasheet | Product Details
SATCOM Amplifier System
400 W Solid State Power Amplifiers from 5850 to 7025 MHz

SATCOM Amplifier System  from Amplus Communication

The AM-2100 Series from Amplus Communications are C-Band SSPAs that operate from 5850 to 7025 MHz. They provide a saturated output power of 400 W and have a gain of over 70 dB. These SSPAs have an in-built harmonic reject filter, waveguide output isolator, and a tricolor LED status indicator to identify the SSPA operation status.
Download Datasheet | Product Details
RF Amplifier
GaAs p-HEMT Amplifier from 30 to 6000 MHz

RF Amplifier  from SJM Prewell

The PG753 from SJM Prewell is a GaAs p-HEMT Amplifier that operates from 30 to 6000 MHz. It delivers a P1dB of 19.7 dBm (at 3500 MHz) with a gain of more than 19.1 dB and has a noise figure of less than 2 dB. The amplifier operates on a single voltage supply of 3.3/5 V and can handle up to 20 dBm of input power.
Download Datasheet | Product Details
Wireless Charging Transmitter
High-Efficiency Transmitter Controller for Wireless Power Systems

Wireless Charging Transmitter  from Semtech

The Semtech TS80002 is a high-efficiency transmitter controller for wireless power systems. It supports transmission of up to 5 watts of wireless power. The chipset sends the necessary commands to the transmitter to adjust the output power level. It can be used in a wide array of low power wireless chargers for Smart Watches, Wearables, Toys, Portable Lighting and Medical Devices.
Download Datasheet | Product Details
DLVA
DLVA from 18 to 40 GHz for Military Applications

DLVA  from Advanced Microwave Inc

The ERDLA184002 from Advanced Microwave is a Detector Log Video Amplifier (DLVA) that operates from 18 to 40 GHz. It uses state-of-the-art thin film technology and provides superior CW immunity. The unit has a dynamic range from -63 to +2 dBm, a typical log accuracy of ±1.3 dB, and a log slope of 50 ± 4 mV/dB (into 100-ohm load).
Download Datasheet | Product Details
Waveguide Circulator
H-Plane 3-Port Y-Junction Circulator from 18 to 110 GHz

Waveguide Circulator  from MI-WAVE

The 180 Series from Mi-Wave are an H-Plane, 3-Port, Y-junction Circulators that operate from 18 to 110 GHz. They have an insertion loss of less than 0.7 dB and provide isolation of over 30 dB. These circulators can handle an average power of up to 30 W and have a VSWR of less than 1.30:1. They are available in standard wave-guide sizes and are ideal for radar, sensing, and communication systems.
Download Datasheet | Product Details
Waveguide Termination
Ka-Band Rectangular Waveguide Terminations from 27.5-31 GHz

Waveguide Termination  from L3Harris Narda-ATM

The 745 Series from L3Harris Narda-ATM are a Ka-Band Rectangular Waveguide Terminations that support an uplink from 27.5-31 GHz and downlink from 18.3-20.2 GHz. They can handle an average power of up to 260 W, a peak power of 120 kW, and have a VSWR of less than 1.15:1. They are mounted in the horizontal plane with free airflow and are fabricatd from 6061 graded aluminum.
Download Datasheet | Product Details
Analog Phase Shifter
360-Degree Voltage Variable Phase Shifter from 10 to 16 MHz

Analog Phase Shifter  from Mini Circuits

The SCPHS-13.6+ from Mini-Circuits is a 360-Degree Voltage Variable Phase Shifter that operates from 10 to 16 MHz. It provides a phase shift of 360 degrees and has an insertion loss of less than 2 dB. The phase shifter can handle an input power of up to 24 dBm and has a control voltage from 0-12 V. It is available in a surface-mount package that measures 0.87 x 0.80 x 0.25 mm.
Download Datasheet | Product Details
Integrated Microwave Assemblie
Digital Frequency Discriminator from 6 to 18 GHz

Integrated Microwave Assemblie  from Akon Inc

The A20-MH205 from Akon is a Digital Frequency Discriminator that operates from 6 to 18 GHz. It has a dynamic range from -63 to +7 dBm, a frequency accuracy of up to 3 MHz, and 14-bits (0.8 MHz) frequency resolution. The device can process signals with pulse widths from 100 ns to CW and has a recovery time of less than 100 ns.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, white papers, events and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]