PREV 14 Oct, 2020 NEXT

New RF and Microwave Products this Week

14 Oct, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 14 Oct, 2020
 
Sponsored by Coilcraft
 
 
 
New RF and Microwave Products this Week
Fixed Attenuator
10 dB Precision-Grade Attenuator from DC to 110 GHz

Fixed Attenuator  from Marki Microwave

The ATN10-00110 from Marki Microwave is a Precision-Grade Fixed Attenuator that operates from DC to 110 GHz with 1mm coaxial connectors. This GaAs MMIC based attenuator provides an attenuation of 10 dB (up to ±0.4 dB accuracy) and has a typical return loss of less than 22 dB. It is an ideal solution for test equipment protection and signal overload prevention in various RF circuits.
Download Datasheet | Product Details
RF Variable Attenuator
6-Bit Digital Step Attenuator from 9 kHz to 13 GHz

RF Variable Attenuator  from pSemi, A Murata Company

The PE43610 from pSemi is a 6-Bit Digital Step Attenuator that operates from 9 kHz to 13 GHz. It has an attenuation range from 0-31.5 dB with a step size of 0.5 dB. This attenuator is capable of maintaining 0.5 dB and 1 dB monotonicity through the 13 GHz bandwidth and doesn’t require any external blocking capacitors on the RF ports.
Download Datasheet | Product Details
Down Converter
50 GHz Heterodyne Downconversion System for Phase Noise Measurements

Down Converter  from Holzworth Instrumentation

The HA7063A from Holzworth is a Heterodyne Downconversion System that can accept an input RF signal from 10 MHz to 50 GHz. It supports both absolute and residual (additive) measurements to 50 GHz, making it one of the only solutions available on the market for taking accurate additive phase noise measurements at frequencies of greater than 18 GHz, without using external mixers. This heterodyne device utilizes an analog architecture that is similar to the dual-channel design that is used in the Holzworth real-time phase noise analyzers with which it operates.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 27.5 to 43.5 GHz

RF Amplifier  from United Monolithic Semiconductors

The CHA2595-QDG from United Monolithic Semiconductors is a wideband Low Noise Amplifier that operates from 27.5 to 43.5 GHz. It provides a gain of 19.5 dB with a noise figure of less than 2.3 dB and has a P1dB of 11 dBm. The amplifier requires a supply of 3.3 VDC and draws 61 mA of current.
Download Datasheet | Product Details
RF Amplifier
1.8 to 6 GHz Low Noise Amplifier for S-band Radar and C-band SATCOM Applications

RF Amplifier  from Mini Circuits

The ZX60-63GLN+ from Mini Circuits is a Low Noise Amplifier that operates from 1.8 to 6 GHz. It provides a linear gain of 29.6 dB with a noise figure of less than 0.9 dB and has a P1dB of 12 dBm. This amplifier requires a DC supply of 5 V and draws up to 80 mA of current. It is available in a rugged, compact module that measures 0.74 x 0.75 x 0.46 inches with SMA connectors.
Download Datasheet | Product Details
GNSS Module
Multi-Band, Multi-Constellation GNSS Receiver

GNSS Module  from Septentrio

The mosaic-X5 from Septentrio is a Multi-Band, Multi-Constellation GNSS Receiver which is specifically designed for the needs of mass-market applications like robotics and autonomous systems. This high-reliability receiver tracks all GNSS constellations and supports all current and future signals. The receiver requires a DC supply from 3-5.5 V and consumes 0.6 W of power.
Download Datasheet | Product Details
GNSS Simulator
Real-Time GNSS Simulator for GPS/Galileo/GLONASS/BeiDou

GNSS Simulator  from LabSat

The LabSat Real-Time from LabSat is a GNSS Simulator that supports GPS, Galileo, GLONASS and BeiDou constellations. LabSat Real-Time operates in real-time mode (LabSat RT Mode) or as a fully functioning record and replay GNSS simulator. It uses SatGen v3 software to generate a live signal stream to a LabSat RT unit.
Download Datasheet | Product Details
Sponsored by Coilcraft
Coilcraft
Conical Inductors for Ultra-wide Bias T’s – Free Samples!
Designed for broadband and high frequency applications, Coilcraft conical inductors offer flat bandwidth with high impedance to 40 GHz. Offered in surface mount and adjustable “flying leads” versions, each with nine inductance values ranging from 0.22 to 8.0 µH. Click here for Free samples!
 
Limiter
50 GHz Biasable Limiter for Protecting Sensitive Circuits

Limiter  from Keysight Technologies

The HMMC-5644 from Keysight is a broadband RF Limiter from DC to 50 GHz. It can be used as an unbiased 23 dBm limiter or the limiting power level can be adjusted with bias voltage, offering design flexibility where needed. This RoHS-compliant low distortion limiter is available as a die that measures 1210 x 1040 µm.
Download Datasheet | Product Details
RF Amplifier
5000 W Solid State Power Amplifier from 10 kHz to 225 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 5000A225B from AR RF/Microwave Instrumentation is a Solid State Power Amplifier that operates from 10 kHz to 225 MHz. This self-contained, air-cooled, broadband amplifier when used with a sweep generator provides 5000 W of output power with a gain of over 67 dB. All amplifier control functions and status indications can be viewed/controlled from a front panel display or remotely using a GPIB/IEEE-488 format, RS-232, fiber optics, USB, or Ethernet interface.
Download Datasheet | Product Details
RF & Microwave Circulator
Drop-in Circulators from 10 MHz to 18 GHz

RF & Microwave Circulator  from UIY Inc.

The drop-in circulators from UIY operate from 10 MHz to 18 GHz. They have an insertion loss of less than 1.2 dB, isolation of over 14 dB, and can handle up to 600 watts of forward power. These circulators are available in a module with TAB connectors as standard products and can also be ordered as a custom module.
Download Datasheet | Product Details
RF Module
Bluetooth 5.2 Module for Industrial and Building Automation Applications

RF Module  from Silicon Labs

The BGM220P from Silicon Labs is a 2.4 GHz Wireless Gecko Bluetooth Module that is designed and built to meet the performance, security, and reliability requirements of battery-powered IoT products. It supports Bluetooth 5.2 (BLE), direction-finding, and Bluetooth mesh low power node protocols. Based on the EFR32BG22 SoC, the BGM220P enables Bluetooth Low Energy connectivity while delivering best-in-class RF range and performance with OTA firmware updates, enhanced security features, and low energy consumption.
Download Datasheet | Product Details
RF Module
Wi-Fi (2.4/5 GHz) and Bluetooth (v5.1) Combo Module

RF Module  from Compex Systems

The WLT639 from Compex Systems is a Dual Concurrent Wi-Fi (2.4/5 GHz) and Bluetooth (V5.1) combo module. It supports dual-band 2x2 MU-MIMO (802.11a/b/g/n/ac/ax) WLAN standards with data rates of up to 573.6 Mbps (2.4 GHz), 1201 Mbps (5 GHz), and Bluetooth data rates of up to 2 Mbps. This module requires a DC supply of 3.3 V and has a current consumption of 798.12 mA (Tx) and 196.8 mA (Rx).
Download Datasheet | Product Details
RF Module
LPWAN Wireless Module for High Density and Long-Range Applications

RF Module  from Miromico

The FMLR-6x-x-MA62x from Miromico is a compact low-power wide-area network (LPWAN) wireless module that supports the LoRaWAN long-range wireless protocol. It uses the Semtech SX1261 (or SX1262) ultra-long-range wireless transceiver and an ARM Cortex M4 based MAX32625 (or MAX32626) micro-controller unit.
Download Datasheet | Product Details
Directional Coupler
30 dB Stripline Directional Coupler from 26.5 to 50 GHz

Directional Coupler  from ET Industries

The C-2650-30 from ET Industries is a Stripline Directional Coupler that operates from 26.5 to 50 GHz. It has a coupling factor of 30 dB, directivity of over 10 dB, and an insertion loss of less than 1.6 dB. The coupler can handle 16 W of average power, 3 kW of peak power, and has a VSWR of less than 1.8:1. It is available in a module with 2.4 mm female connectors.
Download Datasheet | Product Details
Sponsored by Coilcraft
 
 
 
Directional Coupler
10 dB Broadband Directional Coupler from 2 to 40 GHz

Directional Coupler  from VidaRF

The VDC-20400A10 from VidaRF is a broadband directional coupler that operates from 2 to 40 GHz. This 10 dB coupler has a directivity of over 12 dB and an insertion loss of less than 1.6 dB. It can handle 20 watts of incident power and 1 W of reflected power. The coupler is available in a lead-free housing with 2.92 mm female connectors.
Download Datasheet | Product Details
RF Switch
GaAs SPDT Switch from 0.05 to 26.5 GHz

RF Switch  from MACOM

The MASW-011128 from MACOM is a GaAs-based SPDT switch that operates from 0.05 to 26.5 GHz. This non-reflective switch has an insertion loss of 1.7 dB, provides isolation of 48 dB, and has a fast switching speed of 12 ns. It is available as a die that measures 1.3 × 0.85 × 0.1 mm and is ideal for Test & Measurement, EW, and broadband communication systems applications.
Download Datasheet | Product Details
RF Amplifier
Limiting Amplifier from 1.96 to 18.05 GHz

RF Amplifier  from AmpliTech

The APT5-02001800-5010-D46-LM from AmpliTech is a Limiting Amplifier that operates from 1.96 to 18.05 GHz. It provides an output power of 16 dBm with a gain of 70 dB (±2.5 dB flatness) and a noise figure of less than 8 dB. This amplifier is available in a module with coaxial connectors.
Download Datasheet | Product Details
Power Divider
10 MHz 8-Way Amplified Power Divider Module

Power Divider  from Planar Monolithics Industries

The APD-8-10M-12V from PMI is an 8-Way Amplifier Power Divider that operates at 10 MHz. It consists of an LNA, which has a P1dB 20 dBm followed by an 8-Way power divider. It has an insertion loss of less than 4 dB and provides a port to port isolation of 25 dB. This unit requires 12 V of supply voltage and consumes up to 750 mA of current.
Download Datasheet | Product Details
RF Variable Attenuator
Programmable Solid-State Attenuator Assembly from 200 to 8000 MHz

RF Variable Attenuator  from JFW Industries

The 50PA-1183-XX from JFW Industries is a Bi-Directional, Programmable Attenuator Assembly that operates from 200 to 8000 MHz. It is available with 1 to 8 solid-state step attenuators (user can specify the number of attenuators required), each providing up to 95 dB of attenuation with a 1 dB step size. The attenuators have an insertion loss of less than 8 dB and a typical switching speed of 4 µs.
Download Datasheet | Product Details
Termination
10 W Weatherproof Low PIM Termination from 380 to 2700 MHz

Termination  from MECA

The LPT10-NM from MECA is a Low PIM Termination that operates from 380 to 2700 MHz. This 50-ohm termination can handle up to 10 W of average power and 5 kW of peak power. It has a typical passive intermodulation distortion (PIM) of -170 dBc at 1900 MHz and a VSWR of less than 1.25:1. It is available in a module that measures 5.25 (length) x 1.25 (dia.) inches with an N-Type (M) connector.
Download Datasheet | Product Details
Fixed Attenuator
RF Attenuators from 600 MHz to 6 GHz for In-Building Applications

Fixed Attenuator  from Westell Technologies

The 272-2312 Series Westell Technologies are RF Attenuators that operate from 600 MHz to 6 GHz for wireless infrastructure applications. These attenuators are available in attenuation values of 3, 6, 10, 15, 20 and 30 dB with an accuracy of ±2.8 dB and can handle up to 100 W of power. They have a VSWR of 1.5:1 and a low PIM of less than -161dBc.
Download Datasheet | Product Details
Horn Antenna
Horn Antennas with Adjustable Polarization from 4.9 to 6.4 GHz

Horn Antenna  from KP Performance Antennas

The KP-5HA Series from KP Performance Antennas consists of three horn antennas that operate from 4.9 to 6.4 GHz. These antennas have an adjustable polarization between horizontal/vertical and ±45° slant which eliminates the risk of link strength degradation due to polarization mismatch. They provide a gain of up to 19 dBi and have highly suppressed side-lobes and superior front-to-back that allows channel reuse.
Download Datasheet | Product Details
Base Station Antenna
28-Port Quad-Band Canister Antenna Supports Multiple Cellular Network Operators

Base Station Antenna  from Communication Components Inc

The SCA360F-KEHJ4G from Communication Components Inc. is a Quad-Band 28-Port Omni-directional Antenna. It has eight ports covering 698-960 MHz, twelve ports covering 1695-2690 MHz, four ports covering 3400-3800 MHz, and four ports covering 5150-5925 MHz. It can handle up to 100 W of CW input power and has a PIM of less than -153 dBc.
Download Datasheet | Product Details
RFID Tag
UHF RFID Tag from 860 to 960 MHz

RFID Tag  from GAO RFID

The 115004 from GAO RFID is an RFID Tag that operates from 860 to 960 MHz. The tag is based on the Impinj Monza 4 IC and has a read distance of up to 12 m. It provides consistent performance on various materials and is compatible with Impinj QT technology to enhance privacy and security. This RFID tag has an EPC memory of up to 496 bits and a user memory of up to 512 bits.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, white papers, articles, webinars and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]