PREV 23 Nov, 2020 NEXT

Latest News & White Papers this Week

23 Nov, 2020 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 23 Nov, 2020
 
Sponsored by Rohde & Schwarz
 
 
 
Latest News this Week
Menlo Micro Introduces the Industry’s Highest Power Density RF Switch - Menlo Micro
Teledyne e2v Introduces 12-bit ADC that Can Directly Sample 26 GHz Signals - Teledyne e2v HiRel Electronics
Xilinx and Texas Instruments Collaborate to Develop Energy Efficient 5G Radio Solutions - Xilinx
Movandi Introduces 5G Solutions for All Major mmWave Bands - Movandi Corporation
Xiaomi Using Qorvo Front End Solutions for its Wi-Fi 6 Router - Qorvo
R&S and Rosenberger Verify Automotive Ethernet Speed as per the OPEN Alliance TC9 Specification - Rohde & Schwarz
Ranatec Introduces 8×8 Butler Matrix with Support for Multichannel MIMO Testing up To 8 GHz - Ranatec
Orolia Introduces M-Code Enabled Mobile Timing & Sync Solutions - Orolia
VIAVI Introduces 5G-NR and 4G LTE Enhancements to its Cell Site Installation and Maintenance Tool - Viavi Solutions
Keysight Introduces Performance Test Solution for Benchmarking 5G Devices and Base Stations - Keysight Technologies
Imec Launches Research Program for Development of Scalable and Energy-Efficient 6G Technologies - Imec
Nokia, Elisa and Qualcomm Achieve 5G Speeds of 8 Gbps in Finland - Nokia
More News
New White Papers & Articles
Optimizing Thermal Testing for RF - TotalTemp Technologies
4.3-10: Choosing the Right Connector - Huber+Suhner
R&S FSWP Validity of Positive Phase Noise Values - Rohde & Schwarz
Phased Array Beamforming ICs Simplify Antenna Design - Analog Devices
How to Detect, Protect and Prevent Disruption of GPS/GNSS/PNT Signals and Sources - Orolia
More White Papers
Sponsored by Rohde & Schwarz
5G testing equipment
Meet our new product family of 5G testing equipment
New technologies such as massive MIMO and the introduction of mmWave frequencies require more computing power and robust RF hardware. They also make over-the-air testing compulsory. Overcome these challenges with our new family of testing equipment perfected for 5G applications in development, QM acceptance testing and production. Click here to learn more.
 
On Demand Webiinar
Event Image
How to Simplify EMI/EMC Measurement in Your Lab
Date: On Demand
Location: Online
More Events
Featured Products this Week
RF Transistor
2.4 GHz RF Power LDMOS Transistor for Cooking Applications

RF Transistor  from NXP Semiconductors

The MHT1008N from NXP Semiconductors is an RF Power LDMOS Transistor that operates in the 2.4 GHz ISM band. It delivers an output power of 12.5 W with a gain of 18.6 dB and has a PAE of 56.3%. This transistor requires a DC power supply of 28 V and draws up to 110 mA of current. This RoHS-compliant transistor is available in a surface-mount package with integrated ESD protection and is designed for consumer and commercial cooking applications.
Download Datasheet | Product Details
Fixed Attenuator
DC to 18 GHz Pre-Tested Chip Attenuators for Space Applications

Fixed Attenuator  from Smiths Interconnect

The HC Series from Smiths Interconnect are pre-tested, cost-effective temperature variable fixed chip attenuators for next-generation commercial space applications. These attenuators operate from DC to 18 GHz and have attenuation values up to 20 dB. They help in maintaining a consistent signal between satellites, spacecraft and the Earth in the most demanding and mission-critical environments.
Download Datasheet | Product Details
RF Switch
SP8T Absorptive Pin Diode Switch from 0.5 to 3.0 GHz

RF Switch  from G.T. Microwave, Inc.

The R8N-39-2BU from GT Microwave is an SP8T Phase and Amplitude Matched Absorptive Pin Diode Switch that operates from 0.5 to 3.0 GHz. It has an insertion loss of less than 1.75 dB, a typical switching speed of under 100 nSec and provides isolation of more than 60 dB.
Download Datasheet | Product Details
RF Amplifier
200 W Power Amplifier from 0.25 to 150 MHz for EMC Testing

RF Amplifier  from Electronics & Innovation Ltd

The 3200L from Electronics & Innovation Ltd is a Linear Class A Power Amplifier that operates from 250 kHz to 150 MHz. It provides a P1dB of 200 W with a nominal gain of 53 dB (flatness of ± 1.5 dB). The amplifier has a very low harmonic distortion of -20 dBc along with low IMD. It is compatible with most signal generators, frequency synthesizers, sweep generators and other laboratory signal sources.
Download Datasheet | Product Details
RF Amplifier
1000 W Solid-state, Broadband Amplifier System from 1 to 2.5 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 1000S1G2z5B from AR RF/Microwave Instrumentation is a Solid-state, Self-contained, Air-cooled, Broadband Amplifier system that operates from 1 to 2.5 GHz. This amplifier when used with a sweep generator, provides over 1000 W of RF power with a gain of over 60 dB.
Download Datasheet | Product Details
Band Stop Filter
X-Band Fast Tune Notch Filter from 8.5 to 11.5 GHz

Band Stop Filter  from Teledyne Microwave Solutions

The ES006 from Teledyne Defense & Space is an X-Band Fast Tune Notch Filter that is designed to protect ESM (electronic support measures) receivers from high duty cycle frequency agile interference occurring in onboard or combat radar systems. It has a passband from 6 to 13 GHz and an insertion loss of less than 2.5 dB. The filter provides two independently controlled notches with a tuning range from 8.5 to 11.5 GHz with a resolution of up to 16 MHz and a bandwidth of up to 1 GHz.
Download Datasheet | Product Details
RF Amplifier
35 W GaN HEMT Power Amplifier from 6 to 18 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA601J025D from Wolfspeed is a GaN HEMT-based MMIC Power Amplifier that operates from 6 to 18 GHz. The PA provides an output power of over 35 watts with a power gain of 18 dB and an efficiency of up to 42%. It requires a supply voltage of 22 Volts and has a high breakdown voltage. This amplifier is available as a die that measures 0.157 x 0.239 x 0.003 inches.
Download Datasheet | Product Details
Sponsored by Rohde & Schwarz
 
 
 
Termination
10 W Weatherproof Low PIM Termination from 380 to 2700 MHz

Termination  from MECA

The LPT10-NM from MECA is a Low PIM Termination that operates from 380 to 2700 MHz. This 50-ohm termination can handle up to 10 W of average power and 5 kW of peak power. It has a typical passive intermodulation distortion (PIM) of -170 dBc at 1900 MHz and a VSWR of less than 1.25:1. This IP67 rated weatherproof termination is available in a module that measures 5.25 (length) x 1.25 (dia.) inches with an N-Type (M) connector.
Download Datasheet | Product Details
RF Amplifier
1 to 2.5 GHz L- & S-Band Bi-directional Amplifier

RF Amplifier  from NuWaves Engineering

The NW-BA-12C04A from NuWaves Engineering is a bi-directional amplifier that operates from 1 to 2.5 GHz covering the L & S Bands. It provides 15 watts of output power at the Tx port (5% EVM at 34 dBm) and a gain of 13 dB at the Rx port. This compact and light weight bi-directional amplifier is ideal for extending the communication range of half duplex L or S-band transceivers with constant-envelope waveforms or near-constant-envelope waveforms.
Download Datasheet | Product Details
RF & Microwave Isolator
20 dB Surface Mount Isolator from 2.3 to 2.5 GHz

RF & Microwave Isolator  from RF-CI

The RFSL2849S from RF-CI is a Surface Mount Isolator that operates from 2.3 to 2.5 GHz. It provides isolation of more than 20 dB and has an insertion loss of less than 0.25 dB. The isolator can handle 80 W of forward average power, 500 W of forwarding peak power, and 20 W of reverse CW power. It is designed to meet the demands of commercial communication systems for applications in high-performance linear power amplifiers.
Download Datasheet | Product Details
Frequency Synthesizer
Frequency Synthesizer Module from 10 MHz to 4 GHz

Frequency Synthesizer  from Holzworth Instrumentation

The HSM4001B from Holzworth Instrumentation is a Frequency Synthesizer that operates from 10 MHz to 4 GHz. This microwave CW source is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliment the phase coherent nature of these digital-analog hybrid signal sources.
Download Datasheet | Product Details
Vector Network Analyzer
4-Port USB Vector Network Analyzer, 100 kHz to 20 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The C1420 is a 4-port computer controlled vector network analyzer that operates from 100 kHz to 20 GHz. It can handle advanced test applications, providing an unmatched price/performance combination for S-parameter measurement in the supported frequency band. The VNA offers a typical dynamic range of 133 dB (10 Hz IF BW), and sweep speeds as low as 12 microseconds per point.
Download Datasheet | Product Details
Cellular Module
5G NR Sub-6 GHz Module Supporting NSA and SA Modes

Cellular Module  from Quectel

The AG550Q from Quectel is an automotive-grade 5G NR Sub-6 GHz module with 4G (LTE Cat 19)/3G/2G fallback design to support both 5G NR NSA and SA modes. Adopting 3GPP Rel. 15 technology, the module supports a maximum of 2.12 Gbps downlink and 900 Mbps uplink data rates for 5G NR, and a maximum of 2.02 Gbps downlink and 75 Mbps uplink data rates for LTE-A.
Download Datasheet | Product Details
Power Divider
8-Way Power Divider from 0.5 to 23.0 GHz

Power Divider  from Planar Monolithics Industries

The APD-8-0R523G-292FF from PMI is an 8-Way Power Divider that operates from 0.5 to 23.0 GHz. It has an insertion loss of up to 7 dB and provides a port to port isolation of 20 dB. The power divider has an amplitude balance of maximum ±0.5 dB and a phase balance of maximum ±20°. It can handle an average power of 25 W and has a VSWR of less than 2.6:1.
Download Datasheet | Product Details
180 Degree Hybrid Coupler
180 Degree Hybrid Coupler from 6.0 to 26.5 GHz

180 Degree Hybrid Coupler  from KRYTAR

The 4060265 from KRYTAR is a 180 Degree Hybrid Coupler that operates from 6.0 to 26.5 GHz. It has a coupling factor of 3 dB and an insertion loss of less than 1.6 dB. This coupler provides isolation of more than 14 dB and has an amplitude imbalance of ± 0.7 dB and a phase imbalance of ± 12 degrees. The coupler can handle 20 W of average power,3 kW of peak power and has a VSWR of less than 1.7:1.
Download Datasheet | Product Details
180 Degree Hybrid Coupler
180 Degree Hybrid Coupler from 6 to 40 GHz

180 Degree Hybrid Coupler  from Sigatek

The SH16556 from Sigatek is a 180° Hybrid Coupler that operates from 6 to 40 GHz. This coupler has an insertion loss of under 3 dB and isolation of over 13 dB. It can handle up to 20 W of average input power and has a VSWR of less than 1.9:1. This coupler has an amplitude balance of ±1.2 dB and a phase balance of ±16°. It is available in a module that measures 40.64 x 40.64 x 10.16 mm and has 2.92 mm – Female connectors.
Download Datasheet | Product Details
DC Block
DC Block from 0.3 to 18 GHz

DC Block  from Pulsar Microwave

The BBT-05-400B from Pulsar Microwave is a DC Block that operates from 0.3 to 18 GHz. It has an insertion loss of less than 0.8 dB, an Input/Output VSWR of under 1.30:1 and can handle up to 50 V. This RoHS-compliant DC block is available in a module that measures 1.20 x 0.63 x 0.50 inches with SMA connectors.
Download Datasheet | Product Details
SATCOM Amplifier System
400 W Ku-Band, Antenna Mount TWT Amplifier from 13.75 to 14.5 GHz

SATCOM Amplifier System  from Stellar Satcom

The STA1340 from Stellar Satcom is a Ku-band Travelling Wave Tube Amplifier (TWTA) that operates from 13.75 to 14.5 GHz. This Ku-Band Antenna Mount TWTA provides an output power of over 350 W with a gain of up to 70 dB. It has been designed using patented packaging and cooling techniques that enable it to operate in extreme environmental conditions from direct rain and direct sunlight. This amplifier is easy to deploy and has an integrated remote control option as standard, with RS485 and Ethernet interfaces.
Download Datasheet | Product Details
Block Up Converter
40 W Ka-Band Block Up Converter from 28 to 31 GHz

Block Up Converter  from Jersey Microwave

The TBUC-280310-2015-ODU from Jersey Microwave is a Ka-Band Tri-Band Block Up Converter that up-converts an input frequency from 1000-2000 MHz to an output frequency from 28.00-29.00 GHz, 29.00-30.00 GHz, or 30.00-31.00 GHz. The unit can switch from the Military (30-31 GHz) band to any commercial band within 27.0 to 30 GHz.
Download Datasheet | Product Details
Antenna
2.4 GHz Ceramic Chip Antenna for Wi-Fi and ISM Applications

Antenna  from Abracon LLC

The ACAG0201-2450-T from Abracon is a Compact 2.4 GHz Ceramic Chip Antenna for Wi-Fi and ISM applications. This linearly polarized antenna provides a gain of 2.7 dBi with an efficiency of up to 72.7% and directivity of 4.1 dBi. It has an omnidirectional radiation pattern and a VSWR of less than 2:1. This LTCC (low temperature co-fired ceramic) antenna is ideal for IoT, wearable and Bluetooth/BLE devices.
Download Datasheet | Product Details
Antenna
Embedded Cellular IoT Antenna from 698 to 960 MHz

Antenna  from Linx Technologies

The ANT-5GLFPC1-UFL-100 from Linx Technologies is an Embedded LTE/5G Cellular IoT Antenna that operates from 698 to 960 MHz. This linearly polarized antenna delivers a peak gain of -3 dBi with an efficiency of 18%. It can handle an input power of 2 W and has a VSWR of less than 3.7:1. This omnidirectional antenna provides a ground plane independent embedded dipole antenna solution that offers comparable performance to that of an external antenna.
Download Datasheet | Product Details
Wireless Charging Receiver
40 W Qi Compliant Wireless Charging Receiver

Wireless Charging Receiver  from Semtech

The TS8100 from Semtech is a 40 W Wireless Power Receiver that supports Qi, PMA, and other proprietary charging applications. It consists of a single LC resonant circuit that provides dual-mode Qi. The receiver is compatible with variable voltage, variable frequency, and variable duty cycle transmitters and has an integrated controller and flash set up for communications and control.
Download Datasheet | Product Details
Power Sensor
USB Power Sensor from 50 MHz to 6 GHz

Power Sensor  from National Instruments Corporation

The USB-5680 from National Instruments is a USB true RMS power sensor that operates from 50 MHz to 6 GHz. It has a dynamic range from -40 to +23 dBm. The sensor draws only 150 mA from the USB connection, making it highly suitable for mobile applications or adding to automated test applications to free up valuable rack space.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]