PREV 2 Dec, 2020 NEXT

New RF and Microwave Products this Week

2 Dec, 2020 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 2 Dec, 2020
 
Sponsored by Coilcraft
 
 
 
New RF and Microwave Products this Week
Microwave Backhaul Radio Links
Terragraph Certified Point-to-Multipoint Backhaul Radio from 57 to 66 GHz

Microwave Backhaul Radio Links  from Siklu

The Multihaul TG T265 from Siklu is a Point-to-Point/Multipoint Radio Backhaul that operates from 57 to 66 GHz. It has a throughput of up to 1000 Mbps, supports TDD/TDMA duplexing techniques and has a range of up to 1000 ft/300 m. This backhaul radio is designed to operate using Terragraph which is a Gigabit wireless technology that is designed by Facebook to meet the growing demand for reliable and high-speed internet access in urban and suburban environments.
Download Datasheet | Product Details
GPS/GNSS  Disciplined Oscillator
Rugged Low-Noise Disciplined Rubidium Oscillator

GPS/GNSS Disciplined Oscillator  from Orolia

The Spectratime SRO-5680 from Orolia is a low noise Disciplined Rubidium Oscillator that features an EMI-shielded, rugged packaging, and integrates complex synchronization functionality in a low-cost, super-small package. It has an output frequency of 10 MHz and a phase noise of -95 dBc at a 10 Hz offset. This GPSDO has a standard RS232 (9600 b/s) interface for control and monitoring.
Download Datasheet | Product Details
Frequency Multiplier
GaAs MMIC Frequency Doubler from 20 to 40 GHz

Frequency Multiplier  from Keysight Technologies

The HMMC-5645 from Keysight Technologies is a GaAs MMIC Frequency Doubler that up-converts an input frequency from 10-20 GHz to an output frequency from 20-40 GHz (useable up to 50 GHz). It has a conversion efficiency of -12 dB which can remain flat over an input power range of 20 dB using the bias. This doubler is ideal for microwave radio, aerospace and defense, and instrumentation applications.
Download Datasheet | Product Details
RF Amplifier
6.3 W LDMOS Power Amplifier from 3700 to 4000 MHz

RF Amplifier  from NXP Semiconductors

The AFSC5G40E38 from NXP is a fully integrated Doherty LDMOS Power Amplifier module designed for wireless infrastructure applications from 3.7 to 4 GHz. This amplifier provides 6.3 W of average output power with a gain of more than 27.5 dB and an efficiency of 39.3% at 3900 MHz. It requires a 28 VDC supply and is internally matched to 50 ohms.
Download Datasheet | Product Details
RF Transistor
Dual Path GaN RF Transistor from 4.4 to 5 GHz

RF Transistor  from Qorvo

The QPD0405 from Qorvo is a Dual Path GaN RF Transistor that operates from 4.4 to 5 GHz. It provides a saturated output power of 22 watts (43.4 dBm) with a linear gain of 15.4 dB and has an efficiency of up to 75%. This transistor requires a DC voltage of 48 V and consumes 32.5 mA of current. It is manufactured using a GaN HEMT process and is available in a DFN package that measures 7 x 6.5 mm.
Download Datasheet | Product Details
RF Amplifier
20 W GaN MMIC Power Amplifier from 9 to 10 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA901A020S from Wolfspeed is a GaN MMIC Power Amplifier that operates from 9 to 10 GHz. It has been developed for pulsed radar applications and delivers a saturated output power of more than 20 W with a gain of over 30 dB. The amplifier uses Cree’s high-performance 0.15um GaN-on-SiC production process and has a power-added efficiency (PAE) of up to 53% with support for lower system DC power requirements.
Download Datasheet | Product Details
RF Amplifier
1100 W GaN Solid-State Power Amplifier from 910 to 930 MHz

RF Amplifier  from RFHIC

The RIM091K1-20 from RFHIC is a GaN Solid-State Power Amplifier that operates from 910 to 930 MHz. It provides a saturated output power of 1100 W with a gain of 50 dB and a PAE of up to 63%. The amplifier requires a DC supply of 50 V and is capable of both CW and pulsed operation. It is designed using RFHIC’s GaN on SiC HEMT technology that provides high efficiency, reliability, and linearity.
Download Datasheet | Product Details
Sponsored by Coilcraft
Coilcraft
Conical Inductors for Ultra-wide Bias T’s – Free Samples!
Designed for broadband and high frequency applications, Coilcraft conical inductors offer flat bandwidth with high impedance to 40 GHz. Offered in surface mount and adjustable “flying leads” versions, each with nine inductance values ranging from 0.22 to 8.0 µH. Click here for Free samples!
 
RF Spectrum Analyzer
Spectrum Analyzer + Vector Network Analyzer from 9 kHz to 7.5 GHz

RF Spectrum Analyzer  from SIGLENT

The SSA3075X from Siglent is a Spectrum Analyzer and Vector Network Analyzer that operates from 9 kHz to 7.5 GHz. The base model consists of a spectrum analyzer and a vector network analyzer, with optional functions that include a distance to fault locator and a vector signal modulation analyzer. It has a Displayed Average Noise Level (DANL) of -165 dBm/Hz and supports AM, FM and ASK, FSK, PSK, MSK, QAM modulation analysis.
Download Datasheet | Product Details
Fixed Attenuator
Fixed Attenuator Pads from DC to 50 GHz

Fixed Attenuator  from SemiGen

The SPAF series of fixed attenuator pads from SemiGen operate from DC to 50 GHz. They are available in attenuation values from 0 to 30 dB in 1 dB steps (Attenuation values can go up to 100 dB on request). These attenuators can handle an input power of up to 5 W CW. These pads are optimized for coplanar waveguide or microstrip PCB and microwave module assemblies. Bond wire or ribbon is used to connect the input and output terminals to the transmission lines.
Download Datasheet | Product Details
RF Variable Attenuator
100 MHz to 20 GHz 8-bit PIN Diode Attenuator

RF Variable Attenuator  from Planar Monolithics Industries

The PDVAN-4080-60-8 from PMI is an 8-bit programmable pin diode attenuator that operates from 100 MHz to 20 GHz. It has an attenuation range up to 30 dB with step resolution as low as 0.25 dB and can handle up to 20 dBm of CW power. The device has a switching speed of 1.5 micro sec and an insertion loss of less than 4 dB.
Download Datasheet | Product Details
SATCOM Amplifier System
400 W Satellite Uplink Amplifier for the Ku Band

SATCOM Amplifier System  from Rohde & Schwarz

The PKU100 from Rohde & Schwarz is a solid-state power amplifier for the Ku band (13.75 to 14.50 GHz) with a peak power of 400 W and peak efficiency of over 20%. This amplifier combines the advantages of solid-state and tube-based amplifiers. It features optional adaptive linearization at the RF level to provide a previously unattainable spectral purity.
Download Datasheet | Product Details
Block Up Converter
400 W C-Band Block Up Converter from 5.850 to 6.725 GHz

Block Up Converter  from Actox

The ABD400DC from Actox is a C-Band BUC that up-converts an input frequency from 950-1825 MHz to an RF frequency from 5.850-6.725 GHz with a LO frequency of 4.90 GHz. This BUC delivers a saturated output power of 400 W and linear power of 197 W with a gain of 82 dB. It requires an AC supply voltage from 80 to 240 V and consumes up to 1520 W of power.
Download Datasheet | Product Details
RF Amplifier
250 W Solid-state, Broadband Amplifier System from 10 kHz to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 250U1000A from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled, Broadband Amplifier System that operates from 10 kHz to 1000 MHz. This amplifier, when used with a sweep generator, provides over 250 W of RF power with a gain of over 54 dB. It is equipped with a digital control panel (DCP) which provides both local and remote control of the amplifier.
Download Datasheet | Product Details
RF Transistor
250 W Power Transistor from 420 to 450 MHz for Radar Systems

RF Transistor  from Integra Technologies, Inc.

The IGN0450M250 from Integra is a high-power P-Band Avionics Transistor that operates from 420 to 450 MHz. It delivers an output power of more than 250 W with a gain of 24 dB and has a drain efficiency of up to 85%. The transistor is designed to meet the unique needs of P-band radar systems. The IGN0450M250 is available in a thermal efficient metal-based package that measures 20.32 x 10.16 x 4.06 mm with an epoxy-sealed ceramic lid.
Download Datasheet | Product Details
Sponsored by Coilcraft
 
 
 
RF Module
Low Power Wi-Fi + Bluetooth Module for Battery-Powered IoT Devices

RF Module  from Dialog Semiconductor

The DA16600 from Dialog Semiconductor is a Wi-Fi/Bluetooth Combo Module that is designed for battery powered IoT devices. It consists of the Wi-Fi DA16200 SoC and the low power BLE DA14531 SoC which are integrated together to deliver low power consumption and long battery life in a convenient form factor. The module requires a DC supply of 3.3 V.
Download Datasheet | Product Details
Cellular Module
5G NR Sub-6 GHz and mm-Wave Module for M2M and IoT Applications

Cellular Module  from Sierra Wireless

The AirPrime® EM9190 from Sierra Wireless is an Embedded 5G NR and LTE Cat-22 Module that supports Sub-6 GHz and mm-Wave bands. This module is a part of the Sierra EM Series that offers global 5G connectivity. It delivers up to 5.5 Gbps of downlink speeds and up to 330 Mbps of uplink speeds. The module is available in a 30 x 52 x 2.38 mm footprint.
Download Datasheet | Product Details
RF Module
2.4 GHz Wi-Fi Module with Integrated PCB Trace Antenna

RF Module  from Particle

The P1 from Particle is a tiny Wi-Fi module that operates from 2.412 to 2.472 GHz. This module contains a Broadcom Wi-Fi chip and a reprogrammable STM32F205RGY6 32-bit ARM Cortex-M3 microcontroller. The module has an on-board PCB trace antenna and a u.FL connector which allows the user to connect an external antenna if required.
Download Datasheet | Product Details
Cellular IoT Module
4G LTE (Cat 4 and 6) Module for Private LTE Networks

Cellular IoT Module  from Telit Communications

The LE915Ax-P from Telit is a 4G LTE (Cat 4 and 6) Module that supports Citizens Broadband Radio Service (CBRS) Band 48 and LTE Bands 42 and 43 for private LTE Networks. It has an uplink data rate of up to 15 Mbps (Cat 4 and 6) and a downlink of up to 100 Mbps (Cat 4) / 200 Mbps (Cat 6). This 4G LTE module requires a DC supply from 3.1-5.5 V and can be controlled via GPIO, USB 2.0 HS/HSIC, and UART interfaces.
Download Datasheet | Product Details
RF Module
Ultra-Long Range, Low-Power Sub-GHz Radio Module

RF Module  from IMST

The iM881A-XL from IMST is a compact, low power, bidirectional radio module that operates from 863 to 870 MHz in the unlicensed band. The module combines a powerful Cortex® M0+ STM32L081 controller with a LoRa® transceiver from Semtech® Corporation and has been specifically designed for battery-operated devices.
Download Datasheet | Product Details
Front End Module
RF Front End Module for GPS Applications

Front End Module  from NuWaves Engineering

The NW-RF-GPS-FE from NuWaves is an RF Front End Module for GPS applications with a transmit (Tx) frequency from 1626.5 to 1675 MHz and a receive (Rx) frequency from 1518 to 1559 MHz. It delivers more than 20 W of saturated output power with a transmit gain of 43 dB and has a receive gain of 47 dB. This high-performance RF front end module is a powerful combination of the NuPower 13G05A RF power amplifier, a low noise figure LNA, a high isolation diplexer between the transmit and receive paths, and band-reject filters.
Download Datasheet | Product Details
RF Amplifier
5 W Power Amplifier from 2 to 20 GHz

RF Amplifier  from ERZIA

The ERZ-HPA-0200-2000-37 from ERZIA is a High-Power Amplifier that operates from 2 to 20 GHz. It provides an output power (Psat) of up to 37 dBm with a small signal gain of 36 dB. This amplifier requires a DC supply of 24 V, draws 1610 mA of current, and consumes 45 W of power. It is available in a gold-plated aluminum housing that measures 80 x 100 x 21 mm and has SMA female connectors.
Download Datasheet | Product Details
Base Station Antenna
Dual-Band 8-Port Small Cell Panel Antenna

Base Station Antenna  from Communication Components Inc

The SCA65F-EH1A from CCI is an 8-Port Small Cell Panel Antenna that operates from 1695-1880 MHz, 1850-1990 MHz, 1920-2180 MHz, 2300-2400 MHz, 2496-2690 MHz, and 3400-3800 MHz. It has four ports that cover the frequency range from 1695-2690 MHz and four ports for 3400-3800 MHz with port-to-port isolation over 25 dB.
Download Datasheet | Product Details
Antenna
2.4 / 5 GHz Embedded Stamped Metal Antenna for Wi-Fi and Bluetooth

Antenna  from AVX Corporation

The 1000423 from AVX is an Embedded Stamped Metal Antenna that operates from 2400-2485 MHz / 5150-5850 MHz. This internal (off board) antenna has a peak gain of up to 4.5 dBi and efficiency up to 75%. It measures 40 x 15 x 6.4 mm and is available with screw mount, cable and connector mounting options. The antenna can be used for Dual-Band Wi-fi, Bluetooth and ZigBee applications.
Download Datasheet | Product Details
GPS/GNSS Antenna
5.1 dBi Ceramic Patch Antenna for GNSS Applications

GPS/GNSS Antenna  from Linx Technologies

The ANT-GNSSCP-TH18L1 from Linx Technologies is a Ceramic Patch Antenna that operates from 1567.24 to 1583.60 MHz, 1587.69 to 1591.79 MHz, and 1593.31 to 1608.68 MHz. It supports GPS/GLONASS/GALILEO/BeiDou global navigation satellite system (GNSS) operation. This right-hand circular polarized antenna provides a peak gain of 5.1 dBi with an efficiency of up to 66% and has a VSWR of less than 3.2:1.
Download Datasheet | Product Details
RFID Tag
13.56 MHz HF RFID Tag

RFID Tag  from Junmp Tecnology

The HF110 from Junmp is an HF RFID Tag that operates at 13.56 MHz. It is based on the FM11RF08 or NXP NTAG 213/215 IC and has an antenna with a diameter of 25 mm. The tag has a user memory of 1 kB and an operating temperature from -40 to 70°C. It is ISO/IEC 14443 certified.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]