|
New products this week. View it in your browser
|
Sponsored by Planar Monolithics Industries |
|
|
| |
| New RF and Microwave Products this Week |
|
|
|
|
|
|
| Broadband Pick-off Tee from DC to 67 GHz |
Pick-off Tee
from HYPERLABS
|
| The HL9467 from Hyperlabs is a Broadband Pick-off Tee that operates from DC to 67 GHz on the thru line and has a 55 GHz bandwidth (-3 dB) on the pick-off line. It is can be used as a trigger source with minimum perturbation of the thru signal path. The Pick-off tee has a thru insertion loss of 4 dB, a pick-off insertion loss of 10 dB, and can handle an input power of up to 30 dBm. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 100 W GaN HEMT Transistor from 5.3 to 5.8 GHz |
RF Transistor
from WAVEPIA
|
| The WP485P55100MH from WAVEPIA is a Matched GaN HEMT that operates from 5.3 to 5.8 GHz. It provides a saturated output power of 100 W with a small signal gain of 9.6 dB and has an efficiency of 41.3% @ 5.5 GHz. This transistor requires a 48 V DC supply. It is ideal for point to point / multipoint radios, test equipment & industrial controls, SATCOM, military end-use, and C-band radar applications. |
|
Download Datasheet |
Product Details
|
|
|
|
|
Sponsored by Planar Monolithics Industries |
|
|
| |
|
| C-Band Low Noise Amplifier from 4.4 to 5 GHz |
RF Amplifier
from AmpliTech
|
| The APT4-04400500-0715-D4-GW from AmpliTech is a C-band Low Noise Amplifier that operates from 4.4 to 5 GHz. It provides an output power of 16 dBm and gain of 35 dB with a noise figure of 0.6 dB. The amplifier requires a supply of 12 Vdc while consuming up to 16 dBm of power. It is available in a module with SMA male/female connectors and is ideal for SATCOM, radar, microwave radio systems and telemetry applications. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Coaxial Inner-Outer DC Block from 0.01 to 18 GHz |
DC Block
from Mini Circuits
|
| The BLKD-183-S+ from Mini-Circuits is a Coaxial Inner-Outer DC Block that operates from 0.01 to 18 GHz. It has an insertion loss of 0.43 dB and can handle an input voltage of up to 200 V. The DC block is available as a rugged stainless steel connectorized module that measures 0.5 inches in diameter and 1.3 inches in length with SMA-Male and Female connectors. It is ideal for Ku-band, and test & measurement applications. |
|
Download Datasheet |
Product Details
|
|
|
|
|
Sponsored by Planar Monolithics Industries |
|
|
| |
|
| Ultra-Low Loss Cables from 0.3 to 67 GHz |
RF Cable
from MegaPhase
|
| The Phase3 from MegaPhase are ultra-low loss cables that operate up to 67 GHz. These cables are optimized for consistent and repeatable performance where the demand is minimum attenuation, high shielding effectiveness, and low VSWR. They can be used to make cable assemblies with 1 mm, 1.85 mm, 2.4 mm, 2.9 mm, 3.5 mm, Type-N, TNC and SMA connectors. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 30 dB Directional Coupler from 0.5 to 8 GHz |
Directional Coupler
from KRYTAR
|
| The 158030 from Krytar is a Directional Coupler that operates from 0.5 to 8 GHz. It is uniquely designed for system applications where external leveling, precise monitoring, signal mixing or swept transmission and reflection measurements are required. The coupler has a coupling factor of 30 dB (±0.8 dB coupling deviation) with directivity of over 16 dB and an insertion loss of less than 0.8 dB. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 10.5 GHz Fixed Frequency Synthesizer |
Frequency Synthesizer
from EM Research
|
| The LT-10500-03 from EM Research is a Fixed Frequency Synthesizer that generates an output signal at 10,500 MHz using an external 10 MHz reference. The generated signal has an output power of 3 dBm with spurious levels of less than -60 dBc, harmonics of lower than -20 dBc, and phase noise of under -110 dBc/Hz at 100 kHz offset. The synthesizer requires a DC supply voltage of 5 V and consumes 175 mA of current (typical). |
|
Download Datasheet |
Product Details
|
|
|
|
| | About everything RF | | everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest Industry news, information on new product releases, upcoming events, articles, interviews and much more. |
|
| To unsubscribe please click here | [Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip] |
|
