PREV 14 Dec, 2020 NEXT

Latest News & White Papers this Week

14 Dec, 2020 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 14 Dec, 2020
 
Sponsored by Mouser
 
 
 
Latest News this Week
Researchers Develop Ultrathin, Sprayable Antennas for 5G Applications - Drexel University
Marvell and Analog Devices Collaborate to Develop 5G Massive MIMO Radio Unit Solutions - Analog Devices
Skyworks Solution Introduces Low Power Front End Modules for LoRa Technology - Skyworks Solutions
RFHIC Introduces GaN SSPAs and Microwave Generators for RF Energy Applications - RFHIC
SWISSto12 Raises $18.5 Million to 3D Print Antennas for Communication Satellites - SWISSto12
FCC Opens up the 5.9 GHz Band for Wi-Fi and Automotive Applications - Federal Communications Commission
NXP Introduces Complete Suite of 4D Radar Sensors for Vehicle Safety - NXP Semiconductors
Lightweight, Portable Antenna Array Kit to Control Unmanned Aircraft Systems - AeroVironment
Scottish Start-Up Achieves a Major Technical Breakthrough in RF MEMS Technology - Sofant Technologies
Ericsson Achieves Record 5G Speeds on a Single User Device at C-Band Frequencies - Ericsson
Nokia Leads the European Union’s Flagship 6G Project Hexa-X - Nokia
Abracon Acquires Frequency Control Solutions Provider, Fox Electronics - Abracon LLC
More News
New White Papers & Articles
E-Band Based Car Radar Emblem Measurements - Anritsu
Cost-Effectively Extend the Range of Your Existing RF Analyzer to mmWave 5G Frequencies - thinkRF
Bluetooth Low Energy and the Automotive Transformation - Texas Instruments
Consolidating RF Flow for High-Frequency Product Design - Cadence Design Systems
Through the 5G Antenna Design Maze with Antenna-plexers - Qorvo
More White Papers
Sponsored by Mouser
Mouser
Nonreflective, 9kHz to 44GHz Silicon SP4T Switch
The ADI ADRF5043 requires a dual-supply voltage of +3.3V and -3.3V. The device employs CMOS- and low voltage transistor to transistor logic (LVTTL)-compatible controls. The ADRF5043 has enabled and logic select controls to feature all off state and port mirroring, respectively. Click here to learn more.
 
Upcoming Event
Event Image
Radio & Wireless Week 2021
Date: 17 to 20 January 2021
Location: Virtual Conference
More Events
Featured Products this Week
Directional Coupler
10 dB Surface-Mount Directional Coupler from 12 to 18 GHz

Directional Coupler  from Knowles

The FPC06075 from Knowles is a Surface-mount Directional Coupler that operates from 12 to 18 GHz. It has a coupling factor of 10 dB, an insertion loss of less than 0.3 dB and a directivity of 14 dB. The coupler uses DLI’s low loss, high permittivity ceramics which can be used to develop small, temperature stable components.
Download Datasheet | Product Details
RF Cable
High-Performance Repairable Test Cables from 18 to 50 GHz

RF Cable  from Velocity Microwave

The ConeXus Series from Velocity Microwave are high-performance Repairable Test Cables that operate from 18 to 50 GHz. Unlike other cables, the ConeXus cables can be easily repaired in the field when configured with a standard handgrip. The cables are available with APC-7, N-type, SMA, 3.5 mm, 2.92 mm, 2.4 mm, or 1.85 mm male or female connectors.
Download Datasheet | Product Details
RF Amplifier
2000 W Solid State GaN Power Amplifier from 900 to 930 MHz

RF Amplifier  from RFHIC

The RIM092K0-20 from RFHIC is a high power SSPA that operates from 900 to 930 MHz. This amplifier is based on GaN-on-SiC Transistors and provides an output power of up to 2000 watts with an efficiency of 63% while operating from a 50 V supply. The amplifier is available in a module with connectors and is ideal for CW, ISM, microwave CVD reactors, plasma generators, MW heating, and drying applications.
Download Datasheet | Product Details
RF Mixer
GaAs MMIC Double-Balanced Mixer from 14 to 53 GHz

RF Mixer  from Marki Microwave

The MM1-1453LSM from Marki Microwave is a GaAs MMIC Double-Balanced Mixer with an RF/LO frequency from 14 to 53 GHz and an IF frequency from DC to 22 GHz. It has a conversion loss of 8 dB and a high LO to RF isolation of 56 dB at low LO powers. This GaAs MMIC mixer provides excellent spurious performance across a broad bandwidth.
Download Datasheet | Product Details
Termination
DC Blocking SMP Termination from 30 kHz to 23 GHz

Termination  from API Technologies - Inmet

The 8530P from API Technologies – Inmet is a DC Blocking SMP Termination that operates from 30 kHz to 23 GHz. It is matched to 50 ohms and has a VSWR of less than 1.35:1. This termination can operate over a wide temperature range from -65 to 125 °C. It is available in a module that measures 0.65 x 0.28 inches with SMP female connectors.
Download Datasheet | Product Details
RF Amplifier
100 W Solid-State Amplifier from 1 to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 100S1G6AB from AR RF/Microwave Instrumentation is a solid-state broadband amplifier that operates from 1 to 6 GHz. It provides more than 100 W of CW output power with a gain of 50 dB (1.5 dB gain flatness). The amplifier has an IP3 of 56 dBm and a VSWR of 2:1. It has IEEE-488, RS-232, USB 2.0 and Ethernet ports for remote interfacing.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
Power Divider
Amplified Power Splitter from 1.2 to 1.6 GHz for GPS/UAV Applications

Power Divider  from Renaissance Electronics Corporation

The 10A4NP-2S-1 from Renaissance Electronics Corporation is a 2-Way Amplified Power Divider that operates from 1.2 to 1.6 GHz (covering L1 and L2 GPS Bands). It provides an isolation of 45 dB between L1 and L2 frequency bands. The amplified divider has a P1dB of -6 dBm, a gain of 1 dB, and a noise figure of 1.2 dB.
Download Datasheet | Product Details
RF Variable Attenuator
Miniature Variable Attenuators from 0.7 to 26.5 GHz

RF Variable Attenuator  from L3Harris Narda-MITEQ

The 4796 from L3Harris is a Miniature Variable Attenuator that operates from 0.7 to 26.5 GHz. The attenuator has an attenuation range of 15 dB and a frequency sensitivity of ±3 dB. It has an insertion loss of less than 1.5 dB. It is available in a small size, lightweight module with 3.5 mm-female connectors and is ideal for communication applications.
Download Datasheet | Product Details
RF Variable Attenuator
Solid State USB Programmable Attenuator from 20 to 3000 MHz

RF Variable Attenuator  from JFW Industries

The 50P-2055 from JFW Industries is a solid state USB programmable attenuator that operates from 20 MHz to 3000 MHz. It has an attenuation range of 95 dB, a step size of 0.5 dB and a switching speed of 4 us. The attenuator can handle an input power of up to 27 dBm. It has SMA connectors at the input and output ports which are matched to 50 ohms.
Download Datasheet | Product Details
DC Block
50 Ohm DC Block from 100 MHz to 50 GHz

DC Block  from Pasternack Enterprises Inc

The PE8238 from Pasternack Enterprises is a 50 Ohm DC Block that operates from 100 MHz to 50 GHz. It has an insertion loss of less than 1.5 dB and can handle an input voltage of up to 75 V. The DC block is available in a connectorized module that measures 1.12 x 2.40 inches with 2.4 mm male and female connectors.
Download Datasheet | Product Details
RF Amplifier
25 W GaN MMIC Power Amplifier from 20 MHz to 6 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA0060025F1 from Wolfspeed is a GaN MMIC Power Amplifier that operates from 20 MHz to 6 GHz. The amplifier delivers up to 25W of saturated output power with a small signal gain of 17 dB and a Power Added Efficiency of better than 20%. It requires a DC Supply of 50V for operation. The amplifier is ideal for Test Instruments and EMC Amplifier Driver Applications.
Download Datasheet | Product Details
Front End Module
Front End Module for 5G NR, LTE, WCDMA, and CDMA Applications

Front End Module  from Skyworks Solutions

The SKY58212-11 from Skyworks is a Front End Module that is ideal for 5G NR, LTE, WCDMA, and CDMA applications. The FEM consists of PA blocks, input and output matching, a MIPI standard digital control block, single-ended duplexers, integrated antenna and band select switches, and a low noise amplifier (LNA).
Download Datasheet | Product Details
Microwave Backhaul Radio Links
Ultra-Low Latency mmWave Radios from 57 to 71 GHz

Microwave Backhaul Radio Links  from LightPointe

The X60-LX & U60-LX (Long Range) from LightPointe are ultra-low latency, mmWave Radios that operate from 57 to 64 GHz (X60-LX) and 64 to 71 GHz (U60-LX). They provide a full duplex data rate of 1250 Mbps and an equipment latency of less than 10 ns. These pole-mounted radios have a range of 1.6 km or more depending on atmospheric conditions.
Download Datasheet | Product Details
SATCOM Amplifier System
400 W X-Band TWT SATCOM Amplifier System from 7.9 to 8.4 GHz

SATCOM Amplifier System  from Stellar Satcom

The STA1240 from Stellar Satcom is an X-Band TWT Amplifier System that operates from 7.9 to 8.4 GHz. It delivers an output power of up to 400 W with a small signal gain from 25 to 70 dB. The amplifier uses advanced packaging and cooling techniques (Stellar Cool, patent pending) that enable it to operate in extreme environmental conditions like in direct rain or direct sunlight.
Download Datasheet | Product Details
RF Amplifier
Unconditionally Stable LNA from 17.7 to 21.2 GHz

RF Amplifier  from GeoSync Microwave

The A-177212-100 from GeoSync Microwave is an Ultra-Low Noise Amplifier that operates from 17.7 to 21.2 GHz. It provides a gain of more than 60 dB with a noise figure of less than 1.3 dB and has a P1dB of over 12 dBm. The amplifier requires a supply voltage of 15 V and consumes up to 190 mA of current.
Download Datasheet | Product Details
Waveguide Attenuator
Direct Reading Attenuators from 18 to 110 GHz

Waveguide Attenuator  from Ducommun

The CAR Series from Ducommun are Direct Reading Attenuators that operate from 18 to 110 GHz covering seven waveguide bands (K, Ka, Q, U, V, E, & W). They are available in attenuation ranges from 0-50 dB with an insertion loss of less than 1 dB. These attenuators can handle an input power of up to 1 W and are constructed with a precision rotary resistive vane in a circular waveguide.
Download Datasheet | Product Details
Termination
30 W Low PIM Termination from 0.38 to 2.7 GHz

Termination  from MECA

The LPT30-4310M from MECA is a Low PIM Termination that operates from 0.38 to 2.7 GHz. It is matched to 50 ohms and can handle an average power up to 30 watts and peak power up to 5 KW. The termination has PIM values as low as -155 dBc and is thermally compensated to handle full rated power to 85 degrees C.
Download Datasheet | Product Details
RF Spectrum Analyzer
9 kHz to 26.5 GHz Handheld Analyzers for 5G and EW Testing

RF Spectrum Analyzer  from Keysight Technologies

The FieldFox B-series from Keysight are multi-purpose, handheld microwave analyzers that provide precise measurements from 9 kHz to 26.5 GHz. They deliver measurement precision and bandwidth up to 100 MHz for wide-band, real-time spectrum analysis to enable 5G testing in the field.
Download Datasheet | Product Details
Base Station Antenna
20-Port Multi-Beam Base-Station Antenna for LTE Cell Site Deployment

Base Station Antenna  from MatSing

The MS-MBA-3.2-H4-L4 from MatSing is a Multi-Beam Base-Station (MBA) Antenna that utilizes a patented spherical lens design with three isolated high-frequency (1710 - 2690 MHz) cross-polarized beams and two isolated low-frequency (698 - 960 MHz) cross-polarized beams. Each beam is made of two independent antennas and has 4 ports.
Download Datasheet | Product Details
RF Amplifier
100 kHz to 50 GHz Wideband Distributed Amplifier

RF Amplifier  from MACOM

The MAAM-011238 is a wideband amplifier that operates from 100 kHz to 50 GHz. The amplifier provides a gain of 14 dB with a noise figure of 5 dB and P3dB output power of 18.5 dBm at 30 GHz. It requires a positive bias voltage and can be operated with a 6 V supply while consuming 135 mA of current.
Download Datasheet | Product Details
180 Degree Hybrid Coupler
Coaxial 180° Hybrid Coupler from 2 to 4 GHz

180 Degree Hybrid Coupler  from RF-Lambda

The RFHB02G04GPI from RF-Lambda is a 180° Hybrid Coupler that operates from 2 to 4 GHz. It has a coupling factor of 3 dB and provides an isolation of more than 20 dB. The coupler can handle up to 50 W of average power, 1 kW of peak input power, and has a VSWR of 1.35:1. It has an amplitude imbalance of ±0.3 dB and a phase imbalance of ±8°.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]