1. everything RF
  2. RF Newsletters
more
PREV 11 Jan, 2021 NEXT

Latest News & White Papers this Week

11 Jan, 2021 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 11 Jan, 2021
 
Sponsored by AdauraTech
 
 
 
Latest News this Week
Brexit Settlement Sweeps UK Out of Galileo and EGNOS Programs - EGNOS
Pivotal Commware Introduces its Commercially Available 5G Smart Network Repeater - Pivotal Commware
HUBER+SUHNER to Showcase its 70 GHz Cable Assembly at EuMW 2021 - Huber+Suhner
Smellicopter - An Obstacle-Avoiding Drone that Seek Out Smells with a Live Moth Antenna - Smellicopter
Sequans Introduces LTE Cat 1 Module for High Data Rate IoT Applications - Sequans Communications
Top 10 Vector Network Analyzers in 2020 - everything RF
PCTEL Releases mmWave Transmitter for 5G In-Building Network Design and Testing - PCTEL
IQ-Analog Antenna Processor ASIC to Power Lockheed Martin Phased Array Sensors - Lockheed Martin
STMicroelectronics Introduces Bluetooth LE and 802.15.4 Module to Boost IoT Design Productivity - STMicroelectronics
DARPA Develops Software to Enable Communication between Incompatible Tactical RF Links - DARPA
Miniature Antenna Enables Robotic Teaming in Complex Environments - Miniature Antenna
Airbus Introduces Earth Observation Satellites for the French Armed Forces - Airbus Group SE
More News
New White Papers & Articles
Outphasing, Envelope & Doherty Transmitter Test & Measurement - Rohde & Schwarz
How to Speed Up Large-Scale EM Simulation of ICs Without Compromising Accuracy - Cadence Design Systems
Mergers & Acquisitions in 2020 - everything RF
The Benefits of Multi-probe Technology for the Testing of Phased-Array Antennas of LEO Satellite Constellations - Microwave Vision Group
Getting FAA Approval to Install Transmitter Solution Near an Airport - Signal Hound
More White Papers
Sponsored by AdauraTech
 
 
 
Event Coverage
Event Image
European Microwave Week 2020
Date: 10 to 15 January, 2021
Location: Jaarbeurs Utrecht
More Events
Featured Products this Week
Directional Coupler
Space Qualified Directional Coupler from 2 to 8.6 GHz

Directional Coupler  from KRYTAR

The 102008616-SQ from Krytar is a Space-Qualified Directional Coupler that operates from 2 to 8.6 GHz. It has a coupling factor of 16 dB, frequency sensitivity of ±0.25 dB, insertion loss of less than 0.5 dB and directivity of over 20 dB. The coupler can handle 50 W of average power, 3 kW of peak power, and has a VSWR of less than 1.3:1.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Modular VNA from 1 MHz to 43.5 GHz

Vector Network Analyzer  from Anritsu

The ShockLine ME7868A from Anritsu is a 2-port Modular Vector Network Analyzer that operates from 1 MHz to 43.5 GHz by utilizing Anritsu’s Extended-K components. Powered by the revolutionary PhaseLync technology, it enables engineers to synchronize two portable ShockLine MS46131A 1-Port VNAs and connect them directly to a DUT to conduct vector transmission measurements over distances of 100 meters or more.
Download Datasheet | Product Details
RF Switch
SP8T Absorptive Switch from 0.02 to 5 GHz

RF Switch  from JFW Industries

The 50S-2133 from JFW Industries is an SP8T absorptive switch that operates from 0.02 to 5 GHz. It has an insertion loss of 1.9 dB, isolation of over 50 dB and a switching speed of 15 us. This solid-state switch can handle up to 1 W of power and can be controlled via TTL logic. It requires a DC Supply voltage of 5/24 V and is available in a module with SMA Connectors.
Download Datasheet | Product Details
Frequency Synthesizer
10 MHz to 12.5 GHz RF Synthesizer Module

Frequency Synthesizer  from Holzworth Instrumentation

The HSM12001B from Holzworth Instrumentation is a RF synthesizer module that operates from 10 MHz to 12.5 GHz. This microwave CW source is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliment the phase coherent nature of these digital-analog hybrid signal sources.
Download Datasheet | Product Details
RF Test Set
Wireless Test System for Wi-Fi 6 and Wi-Fi 6E Applications

RF Test Set  from LitePoint

The IQxel-MW 7G is a wireless tester with a frequency range from 400 MHz to 7300 MHz. It can be used to test Cellular Technologies (2G, 3G, 4G, 5G), LPWAN technologies (LoRa, Sigfox), Bluetooth and Wi-Fi 6/6E in the 2.4, 5 GHz and 6 GHz Bands. The test set addresses the requirements of the IEEE 802.11ax (Wi-Fi 6) and 802.11ac (Wi-Fi 5) specifications and tests all IEEE 802.11 legacy specifications.
Download Datasheet | Product Details
Power Divider
30 W 2-Way Power Divider from 2 to 18 GHz

Power Divider  from Werbel Microwave

The D-2182 from Werbel Microwave is a 2-Way Power Divider that operates from 2 to 18 GHz. It can handle up to 30 W of CW input power, has an insertion loss of 1 dB and provides an isolation of over 16 dB. The power splitter has an amplitude balance of 0.1 dB, a phase balance of 2 degrees, and a VSWR of 1.35:1. This RoHS-compliant power divider is available in a module that measures 2.25 x 1.00 x 0.38 inches and has SMA-Female connectors.
Download Datasheet | Product Details
Laminate
Ceramic-filled PTFE based Laminate for RF & Microwave Applications up to 40 GHz

Laminate  from Rogers Corporation

The RO3003 from Rogers Corporation is a Ceramic-filled PTFE based Laminate that can be used for RF & Microwave applications up to 40 GHz. The laminate has a dielectric constant of 3 (8-40 GHz) and provides exceptional plated through-hole reliability, even in severe thermal environments. It exhibits a coefficient of thermal expansion (CTE) of 17 ppm/degree C on the X and Y axis and 24 ppm/degree C on the Z-axis.
Download Datasheet | Product Details
RF Amplifier
50 W Solid-State Power Amplifier from 1 to 18 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2107ADB-2 from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 1 to 18 GHz. This Class AB Linear GaN Amplifier has a dual-band configuration with 2 inputs and 2 outputs. Band A operates from DC to 6 GHz and Band B operates from 6 to 18 GHz. It delivers a saturated output power of more than 50 W with a gain of higher than 47 dB.
Download Datasheet | Product Details
RF Amplifier
250 W Solid-state, Broadband Amplifier System from 10 kHz to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 250U1000A from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled, Broadband Amplifier System that operates from 10 kHz to 1000 MHz. This amplifier, when used with a sweep generator, provides over 250 W of RF power with a gain of over 54 dB. It is equipped with a digital control panel (DCP) which provides both local and remote control of the amplifier.
Download Datasheet | Product Details
RF Amplifier
100 W Power Amplifier from 0.15 to 250 MHz for EMC Conducted Immunity Testing

RF Amplifier  from Com-Power Corporation

The ACS-250-100W from Com-Power Corporation is a Power Amplifier that operates from 0.15 to 250 MHz. It provides a saturated output power of 100 Watts with a gain of 50 dB and is compatible with AM, FM, and pulsed input signals. The amplifier has a harmonic distortion of 14 dBc @ 100 W and a VSWR of less than 1.7:1.
Download Datasheet | Product Details
Sponsored by AdauraTech
 
 
 
Microwave Generator
200 W GaN Microwave Generator from 2400 to 2500 MHz

Microwave Generator  from RFHIC

The RIM25200-20G from RFHIC is a GaN Microwave Generator that operates from 2400 to 2500 MHz. It delivers a typical CW output power of 200 W with an efficiency of up to 60%. The generator has a pulse duty cycle from 1 to 99% and a frequency resolution of 100 kHz. It requires a supply voltage of 50 V and consumes 6.88 A of current.
Download Datasheet | Product Details
Cellular IoT Module
Single-Mode LTE Cat M1 Module for IoT and M2M Devices

Cellular IoT Module  from Sequans Communications

The Monarch GMS01Q from Sequans is a Single-Mode LTE Cat M1 Module that is designed for IoT applications. It is based on Sequans Monarch LTE platform that provides significant improvements in performance and power consumption over the previous version while offering seamless migration. The module consists of a single-SKU RF front end, LTE-optimized transceiver, and an embedded orange SIM that allows deployment in global bands.
Download Datasheet | Product Details
RF Variable Attenuator
Space Qualified Voltage-Variable Attenuator MMIC from DC to 20 GHz

RF Variable Attenuator  from Analog Devices

The ADH346S from Analog Devices is an MMIC Voltage-Variable Attenuator that operates from DC to 20 GHz. This space-qualified attenuator has an attenuation range of 27 dB with an insertion loss of 2 dB. It can handle an input power of up to 18 dBm and has a control voltage from -5 to +1 VDC. The attenuator is available as a die and is ideal for aerospace and defense applications.
Download Datasheet | Product Details
RF Amplifier
10 W GaN on SiC General-Purpose Amplifier up to 5 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The WSGPA01-V1 from Wolfspeed is a GaN on SiC Discrete General-Purpose Amplifier (GPA) designed for applications up to 5 GHz. The amplifier delivers up to 10 W of output power with a small signal gain of 18 dB and a drain efficiency of more than 19%. It requires a DC Supply of 50 V for operation. The amplifier is based on a gallium nitride (GaN) High Electron Mobility Transistor (HEMT).
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 1 to 18 GHz

RF Amplifier  from AmpliTech

The AWLN-35-01001800-1520-D4 from AmpliTech is a Low Noise Amplifier that operates from 1 to 18 GHz. It provides a gain of more than 35 dB (±2.5 dB gain flatness) with a noise figure of 1.3 dB and has a P1dB of +20 dBm. The amplifier can handle up to +13 dBm of CW input power and has a VSWR of 2.5:1. It has been developed using state-of-the-art pHEMT technology to provide quality and performance.
Download Datasheet | Product Details
Frequency Multiplier
GaAs MMIC mm-Wave 2x Multiplier from 20 to 100 GHz

Frequency Multiplier  from Marki Microwave

The MMD-20100H from Marki Microwave is a GaAs MMIC mm-Wave 2x Multiplier that multiplies an input frequency from 10-50 GHz to an output frequency from 20-100 GHz. This multiplier can handle up to 10 dBm of input power and has an isolation of 44 dB (30-100 GHz). It is fabricated using GaAs Schottky diodes. The multiplier is available as a wire bondable die or as a module with 1 mm coaxial connectors.
Download Datasheet | Product Details
Termination
0.5 W, 2.4 mm-Male Termination from DC to 50 GHz

Termination  from MECA

The 469-1 from MECA is a 2.4 mm-Male, 50 ohm termination that operates from DC to 50 GHz. The termination can handle up to 0.5 watts of average power and has a VSWR of 1.60:1.
Download Datasheet | Product Details
Base Station Antenna
Dual-Band 2X2 MIMO 120° Sector Panel Antenna

Base Station Antenna  from Southwest Antennas

The 1009-067 from Southwest Antennas is a Dual-Band 2X2 MIMO Sector Panel Antenna that operates from 1.35 - 1.4 GHz and 4.4 - 5 GHz. It can handle an input power of up to 50 W, provides a gain of 12 dBi and has a VSWR of less than 2:1. This 45 degree polarized antenna has a horizontal beamwidth of 120 degrees and a vertical beamwidth of 11 degrees.
Download Datasheet | Product Details
RFID Tag
IP68 Rated RFID Tag from 902 to 928 MHz

RFID Tag  from MOLEX

The 133560571 from Molex is an RFID Tag that operates from 902 to 928 MHz. It is based on the Alien Higgs-3 IC and has a maximum reading distance of 7.62 m. The tag has an EPC memory of 96-bits and 512-bits of user memory. It is designed for industrial markets such as oil and gas, manufacturing, construction, and agriculture.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]