PREV 14 April, 2021 NEXT

New RF and Microwave Products this Week

14 April, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 14 April, 2021
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
Vector Network Analyzer
2/4 Port High-End Vector Network Analyzers from 10 MHz to 67 GHz

Vector Network Analyzer  from Rohde & Schwarz

The R&S ZNA from Rohde and Schwarz are 2/4 Port High-end Vector Network Analyzers that operate from 10 MHz to 67 GHz. These VNAs are a powerful, universal test platform for characterizing active and passive DUTs. They support R&S OTA test updates that enable accurate measurements even on high gain devices like satellite downconverters. The VNAs have a user-friendly, purely touch-based GUI and offer versatile capabilities for both pulse generation and measurement.
Download Datasheet | Product Details
RF Variable Attenuator
63 dB USB Programmable Attenuator from 0.01 to 21 GHz

RF Variable Attenuator  from Micro Lambda Wireless, Inc.

The MLAT-1000B from Micro Lambda Wireless is a Programmable Attenuator that operates from 0.01 to 21 GHz. It provides an attenuation of up to 63 dB in 0.5 dB steps and has a switching speed of 20 us. The attenuator has an insertion loss of less than 7 dB and a VSWR of 2.1:1. It requires a DC supply voltage of 4-6 V, consumes 50 mA of current and has 2.7/3.3/5.0 V digital control logic.
Download Datasheet | Product Details
RF Variable Attenuator
8-Channel Programmable Attenuator System from 200 MHz to 6 GHz

RF Variable Attenuator  from JFW Industries

The 50PA-506 from JFW Industries is a Solid State Programmable attenuator system that operates from 200 MHz to 6 GHz. It has eight individually controlled attenuation channels that each provide a total attenuation range of 63 dB with 1 dB steps. Each attenuation channel has an insertion loss of less than 6.6 dB and can handle up to 33 dBm of input power.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 17.7 to 22 GHz for SATCOM Applications

RF Amplifier  from ERZIA

The ERZ-LNA-1770-2200-40-1.5 from ERZIA is a Ka-Band Low Noise Amplifier for SATCOM that operates from 17.7 to 22 GHz. It provides a small signal gain of over 36 dB with a noise figure of less than 1.2 dB and has a P1dB of 10 dBm. The amplifier requires 12 V of DC supply and consumes 1.1 W of power. This LNA is suitable for industrial, laboratory, Satcom, telecom, space/aerospace, and military applications.
Download Datasheet | Product Details
RF Amplifier
20 to 31.5 GHz Low Noise Amplifier for 5G and VSAT Applications

RF Amplifier  from Altum RF

The ARF1200Q2 from Altum RF is a Low Noise Amplifier that operates from 20 to 31.5 GHz. It provides a linear gain of 20 dB with a noise figure of 3.5 dB. This amplifier is well suited for demanding, high-order modulation schemes such as millimeter-wave 5G. It is internally matched to 50-ohms and has ESD protection. The amplifier requires a 3.3 V DC supply and draws 15 mA of current.
Download Datasheet | Product Details
RF Amplifier
2 W GaAs HBT Power Amplifier from 860 to 960 MHz

RF Amplifier  from CML Microcircuits

The CMX90A004 from CML Microcircuits is a Two-Stage, Fully Matched MMIC Power Amplifier that operates from 860 to 960 MHz. It delivers a saturated output power of 2 W (~32.5 dBm) with a gain of 30 dB and PAE of 49%. The amplifier is based on GaAs HBT technology and requires a DC supply voltage of 2.7 to 4.5 V while drawing 78 mA of current.
Download Datasheet | Product Details
Sponsored by Mouser
Qorvo QPF4551 5.0GHz Wi-Fi 6 Front End Module
Highly-integrated FEM for IEEE 802.11ax systems
Qorvo QPF4551 5.0GHz Wi-Fi® 6 Front End Module features a 5150MHz to 5850MHz frequency range, up to 32dB transmit gain, and a low 2.1dB noise figure. The QPF4551 combines a 5.0GHz power amplifier, regulator, SPDT, and a bypassable LNA into a single package. Click here to learn more.
 
Directional Coupler
30 dB Low PIM Directional Coupler from 0.5 to 18 GHz

Directional Coupler  from RD Microwaves

The C1-B12-30 from RD Microwaves is a Low PIM Directional Coupler that operates from 500 to 18000 MHz. It provides 30 dB of coupling with a directivity of 20 dB and has an insertion loss of less than 0.3 dB. The coupler can handle an average power of 400 W, a peak power of up to 3 kW, has a VSWR of less than 1.35:1, and a PIM of -160 dBc.
Download Datasheet | Product Details
OCXO
Highly Stable Miniature OCXO from 5 to 100 MHz

OCXO  from Dynamic Engineers

The DOCXO2020C from Dynamic Engineers is a Highly Stable Miniature OCXO with a frequency from 5 to 100 MHz. It has a phase noise of -170 dBc/Hz @100 kHz, and frequency stability of ±0.1 ppb over a temperature range from -40°C to +80°C. The OCXO has low aging of ±1 x 10-10/day, and 2 x 10-8/year. It provides HCMOS (TTL) or Sinewave outputs while operating over a 5 V supply voltage.
Download Datasheet | Product Details
RF Amplifier
RF Test System for EMC Radiation Immunity Testing

RF Amplifier  from SUNGSAN

The SA1059 from SUNGSAN is an RF Test System that is used for EMC radiation immunity testing of medical devices. It is a high power amplifier system that is used for pre-verification and to simulate interference between medical devices and equipment. The Power Amplifier system operates from 1000 to 6000 MHz with an output power of more than 250 W and a gain of 54 dB. It has 2nd harmonics of -20 dBc and a VSWR of less than 2:1.
Download Datasheet | Product Details
RF Amplifier
1000 W Solid-state, Broadband Amplifier System from 1 to 2.5 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 1000S1G2z5B from AR RF/Microwave Instrumentation is a Solid-state, Self-contained, Air-cooled, Broadband Amplifier system that operates from 1 to 2.5 GHz. This amplifier when used with a sweep generator, provides over 1000 W of RF power with a gain of over 60 dB. It is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier.
Download Datasheet | Product Details
Cellular Module
LTE Cat 1 Module for Telematics, Surveillance, Industrial Routers, and Remote Diagnostic IoT Applications

Cellular Module  from SIMCom

The A7682E from SIMCom is an LTE Cat 1 cellular module that supports LTE-FDD/GSM/GPRS/EDGE. It delivers an uplink data transfer rate of 5 Mbps (LTE Cat 1), 236.8 Kbps (EDGE), 85.6 Kbps (GPRS) and a downlink data transfer rate of 10 Mbps (LTE Cat 1), 236.8 Kbps (EDGE) and 85.6 Kbps (GPRS). It is available in an LCC+LGA package that measures 19.6 x 19.6 x 2.4 mm.
Download Datasheet | Product Details
Beamforming IC
Multi-channel Ka-Band Beamforming Transceiver IC

Beamforming IC  from EnSilica

The ENS92030 from EnSilica is a Multi-channel Beamforming Transceiver IC that is designed for phased-array electronically steerable antenna systems. It has 4 Rx and 4 Tx paths with each RF path containing independent 5-bit phase control and fine gain control to achieve accurate beam steering and gain compensation/weighting between antenna elements.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
90 Degree Hybrid Coupler
90 Degree Hybrid Coupler from 1 to 4 GHz

90 Degree Hybrid Coupler  from UMCC

The HC-K000-QS from Universal Microwave Components is a 90° Hybrid Coupler that operates from 1 to 4 GHz. This 3 dB coupler can handle an average CW input power of up to 50 W, a peak input power of up to 3 kW, and has a VSWR of less than 1.25:1. It provides isolation of more than 22 dB. The coupler has a maximum phase error of ±5° and is impedance matched to 50 ohms.
Download Datasheet | Product Details
RF Variable Attenuator
5-Bit Programmable PIN Diode Attenuator from 100 MHz to 50 GHz

RF Variable Attenuator  from Planar Monolithics Industries

The DTA-100M50G-30-CD-1 from Planar Monolithics Industries is a 5-bit Programmable PIN Diode Attenuator that operates from 100 MHz to 50 GHz. It has an attenuation range of 30 dB with a step size of 1 dB. The attenuator has an insertion loss of less than 10 dB, a switching time of less than 1 µs (ON time) and 0.5 µs (OFF time). It can handle an input power of up to 24 dBm and has a VSWR of less than 2.5:1.
Download Datasheet | Product Details
Wireless SoC
32-Bit Bluetooth 5.0 LE Microcontroller for System Control and Wireless Communication

Wireless SoC  from Renesas

The RX23W from Renesas is a 32-bit Microcontroller with full Bluetooth 5.0 Low Energy support for system control and wireless communication in IoT endpoint devices. The MCU delivers excellent communication characteristics, with a reception sensitivity level of -105 dBm at 125 kbps. It has full function support for Bluetooth 5.0 Low Energy long range and mesh networking.
Download Datasheet | Product Details
Front End Module
Wi-Fi 6 Front-End IC from 5150 to 5925 MHz

Front End Module  from NXP Semiconductors

The WLAN7102C from NXP Semiconductors is a Wi-Fi 6 Front-end IC that operates from 5150 to 5925 MHz. It consists of an integrated power amplifier, logarithmic power detector, low noise receiver amplifier (LNA), single pole double throw (SPDT) switch, coexistence filters for both transmit and receive channels and RF decoupling capacitors for all VCC and control pins.
Download Datasheet | Product Details
RF & Microwave Isolator
K-Band TVAC Compatible Isolator from 17.30 to 21.20 GHz

RF & Microwave Isolator  from DiTom Microwave

The DV1721 from DiTom Microwave is a K-Band TVAC Compatible Isolator that operates from 17.30 to 21.20 GHz. It provides isolation of more than 22 dB and has an insertion loss of less than 0.45 dB. The isolator can handle up to 15 W of average power and 30 W of peak power. This 50-ohm isolator is available in a module that measures 0.5 x 0.7 x 0.5 inches with SMA-Female connectors.
Download Datasheet | Product Details
Power Divider
2 Way Reactive Power Splitter from 0.698 to 2.7 GHz

Power Divider  from MECA

The R2S-1.900-M01 from MECA is a 2-way reactive power divider that operates from 698 MHz to 2.7 GHz. It can handle power up to 100 W, has an insertion loss of 0.30 dB, an amplitude balance of 0.2 dB, a phase balance of 2 degrees, and a VSWR of 1.10:1. The power divider has stainless steel passivated connectors, a Beryllium Copper Gold Plated pin, and is housed in an aluminum package.
Download Datasheet | Product Details
SATCOM Antenna
Ka-Band Multi-Role Airborne SATCOM Terminal

SATCOM Antenna  from Orbit Communication Systems

The GX46 from Orbit Communications is a Ka-Band Airborne SATCOM Terminal optimized for use over Inmarsat’s GX constellation and fully interoperable with the US/Australia Wideband Global Satcom (WGS) system. It has a Tx frequency range from 29 to 31 GHz and an Rx frequency range from 19.2 to 21.2 GHz.
Download Datasheet | Product Details
RF Transistor
850 W GaN-on-SiC Power Transistor from 400 to 450 MHz

RF Transistor  from Integra Technologies, Inc.

The IGN0450M850 from Integra Technologies is a P-band Power Transistor that operates from 400 to 450 MHz. It delivers an output power of more than 850 W (Pulsed) with a gain of over 20 dB and an efficiency of up to 75 %. The transistor has a pulse width of 300 µs and a duty cycle of 10 %. It is fabricated using GaN on SiC HEMT technology and can handle an input power up to 15 W.
Download Datasheet | Product Details
Band Pass Filter
Helical Cavity Bandpass Filter from 150.5 to 155.5 MHz

Band Pass Filter  from ECHO Microwave

The EHCA153P5BR50B from ECHO Microwave is a Helical Cavity Bandpass Filter with a passband from 150.5 to 155.5 MHz. It can handle a CW input power of up to 50 W, has an insertion loss of less than 1 dB and provides an attenuation of over 50 dB above and below the passband. This ceramic filter is available in a module with N-type (Female) connectors.
Download Datasheet | Product Details
Antenna
Dual-Band (2.1-2.5 GHz / 4.4-5.9 GHz) Half Wave Dipole Omni Antenna

Antenna  from Southwest Antennas

The 1001-254 from Southwest Antennas is a Dual Band, Half Wave Dipole Antenna that operates from 2.1-2.5 GHz (low band) and 4.4-5.9 GHz (high band). This vertically polarized antenna provides a peak gain of 2.3 dBi in the low band and a peak gain of 2.6 dBi in the high band. It can handle 50 W of input power and has a VSWR of less than 2:1.
Download Datasheet | Product Details
RFID Reader Module
Long Range 4-Port Embedded RAIN RFID Reader for High Performance Applications

RFID Reader Module  from CAEN RFID

The R4320C from CAEN RFID is a 4-port Embedded RAIN RFID Reader for high-performance applications. It can be programmed to deliver output power from 10 to 31.5 dBm and is able to detect RAIN tags from 9 meters (30 feet) depending on the antenna and the tag used. It requires a DC supply from 3.5 to 5.5 V and consumes less than 8.5 W of power in Tx/Rx mode.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]