PREV 19 April, 2021 NEXT

Latest News & White Papers this Week

19 April, 2021 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 19 April, 2021
 
Design-in the BEST Ultra Low Phase Noise OCXO
 
 
 
Latest News this Week
Mercury Introduce Portable Jammer Training System for Radar and Communications Operators - Mercury Systems
Analog Devices Introduces 16 Channel Mixed Signal Front End Digitizers for Aerospace and Defense - Analog Devices
Ericsson and MediaTek Achieve 5.1 Gbps 5G Data Rate Using mmWave and Sub-6 GHz Aggregation - Ericsson
Keysight Provides New Channel Emulation Capabilities for 5G Non-Terrestrial Networks - Keysight Technologies
Broadcom Ships Over 500 Million Wi-Fi 6 Chipsets - Broadcom
Renesas Partners with Qualcomm to Speed up Adoption of Wireless Charging Technology in Smartphones - Renesas
RFHIC Introduces 5.8 GHz GaN Solid State Microwave Generator for ISM Applications - RFHIC
Nokia Introduces its Next Generation of 5G Microwave Transport Solutions - Nokia
R&S Updates its Plane Wave Converter for Better Accuracy in 5G FR1 Base Station OTA Testing - Rohde & Schwarz
NVIDIA AI-on-5G Computing Platform Adopted by Leading Service and Network Infrastructure Providers - NVIDIA
Qualcomm Conducts Data Calls Using 5G mmWave and Sub-6 GHz Aggregation - Qualcomm
Researchers Develop Atom Based Sensors for Determining the Direction of an Incoming Radar Signal - NIST
More News
New White Papers & Articles
The Key Things You Need to Know About Bluetooth 5.1 and 5.2: Faster, More Flexible, and Enhanced for Audio - Laird Connectivity
Guide to RF Coaxial Connectors and Cables - AR RF/Microwave Instrumentation
Providing EMC Solutions for mmWave and Multi-Gigabit Applications in a Variety of Use Cases - I-PEX
Accurate Gain/Phase Measurement at Radio Frequencies up to 2.5 GHz - Analog Devices
RF Matrix Switches: Blocking vs. Non-blocking - JFW Industries
More White Papers
Sponsored by NEL Frequency Controls
10 MHz Ultra Low Phase Noise
10 MHz Ultra Low Phase Noise (Close to Carrier) OCXO in 36x27 mm “Europack”
This 10 MHz OCXO provides ultra low phase noise of -91 dBc/Hz at 0.1 Hz, -123 dBc/Hz at 1 Hz, -151 dBc/Hz at 10 Hz, and -172 dBc/Hz on the floor. ADEV is 2E-13 @ 1s. Ideal for Microwave/ RF, Instrumentation, GNSS, Radar, Communications. Click here for Specifications.
 
Upcoming Event
Event Image
Small Satellites Conference 2021
Date: 26 to 27 April, 2021
Location: Virtual / Digital Format
More Events
Featured Products this Week
Front End Module
Wi-Fi 6 Front-End Module from 5150 to 5925 MHz

Front End Module  from Qorvo

The QPF4506 from Qorvo is a Wi-Fi 802.11ax Front-end module that operates from 5150–5925 MHz. The FEM consists of an integrated 5 GHz power amplifier (PA), a regulator, a single-pole two throw switch (SP2T), and a bypassable low noise amplifier (LNA). The receive path has integrated die level filtering for 2nd and 3rd harmonics and 2.4 GHz rejection for DBDC operation.
Download Datasheet | Product Details
RF Amplifier
High Linearity InGaP Power Amplifier from 1.7 to 1.8 GHz

RF Amplifier  from Guerrilla RF

The GRF5517 from Guerrilla RF is a Two-Stage InGaP HBT Power Amplifier that operates from 1.7 to 1.8 GHz. It delivers an output power of +23 dBm with a small signal gain of over 27.5 dB. The amplifier requires a DC supply of 5 V and consumes less than 225 mA of current. It provides excellent IM3 performance and has a rugged design that makes it extremely resilient to mismatched loads.
Download Datasheet | Product Details
RF Amplifier
250 W Solid-state, Broadband Amplifier System from 10 kHz to 1000 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 250U1000A from AR RF/Microwave Instrumentation is a solid-state, self-contained, air-cooled, Broadband Amplifier System that operates from 10 kHz to 1000 MHz. This amplifier, when used with a sweep generator, provides over 250 W of RF power with a gain of over 54 dB. It is equipped with a digital control panel (DCP) which provides both local and remote control of the amplifier.
Download Datasheet | Product Details
RF Spectrum Analyzer
Dual USB Real-Time Spectrum Analyzer with 245 MHz true I/Q streaming

RF Spectrum Analyzer  from Aaronia AG

The SPECTRAN V6 X from Aaronia is a high-performance USB real-time spectrum analyzer that operates from 10 MHz to 6 GHz. The analyzer supports dual USB True I/Q streaming of up to 245 MHz (IQ rate) real-time bandwidth. Multiple devices can be cascaded together to achieve an even higher real-time bandwidth. The analyzer has a DANL of -170 dBm/Hz with the internal pre-amp on and an amplitude accuracy of +/- 0.5 dB.
Download Datasheet | Product Details
Signal Generator
50 MHz to 6 GHz Vector Signal Generator

Signal Generator  from Signal Hound

The VSG60A from Signal Hound is a vector signal generator that operates from 50 MHz to 6.0 GHz with a real-time bandwidth of 40 MHz. It has an output amplitude range from -55 to 7 dBm and has a number of pre-programmed modulation types inbuilt – these include Wi-Fi, QAM, PSK, CW, Pulse, Multi-tone, and many more. The VSG60A is available in a compact module that measures 8.63 x 3.19 x 1.19 inches.
Download Datasheet | Product Details
Frequency Synthesizer
10 MHz to 20 GHz Multi-Channel Frequency Synthesizers

Frequency Synthesizer  from Holzworth Instrumentation

The HS9000 Series from Holzworth are Multi-Channel Frequency Synthesizers that operate from 10 MHz to 20 GHz. This is a unique platform that allows users to specify custom configurations for a COTS product. Units can be fitted with anywhere from 1 to 8 channels with the ability to specify each channel's frequency limits and performance options.
Download Datasheet | Product Details
Design-in the BEST Ultra Low Phase Noise OCXO
 
 
 
Microwave Generator
3KW GaN Solid-State Microwave Generator from 900 to 930 MHz

Microwave Generator  from RFHIC

The RIU093K0-40TG from RFHIC is a Solid-State Microwave Generator that operates from 900 to 930 MHz. It delivers an output power of up to 3 kW, has a frequency resolution of 100 kHz, and offers a system efficiency of 60%. This GaN-on-SiC based microwave generator has phase control from 0-180 degrees. The generator has been designed for ISM (Industrial, Scientific, Medical) applications.
Download Datasheet | Product Details
RF Amplifier
35 W GaN MMIC Power Amplifier from 8 to 12 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA801B030F1 from Wolfspeed is a GaN MMIC Power Amplifier that operates from 8 to 12 GHz. It delivers a saturated output power of 35 W with a large signal gain of 19 dB and has a PAE of 44%. The amplifier is designed using a 0.15um GaN on SiC process that has excellent thermal characteristics that allow for simplified system cooling requirements. It is ideal for civil and military radar applications.
Download Datasheet | Product Details
RF Amplifier
Cryogenic Low Noise Amplifier MMIC from 28 to 52 GHz

RF Amplifier  from Low Noise Factory

The LNF-LNC28_52WB from Low Noise Factory is a Cryogenic Low Noise Amplifier MMIC that operates from 28 to 52 GHz. It provides a gain of 34 dB with a noise figure of 0.15 dB. The LNA requires a DC supply of 1 V and consumes 10 mA of current. It is available as a module that measures 28.00 x 19.52 x 19.20 mm with WR22 (UG599/U) waveguide interfaces.
Download Datasheet | Product Details
Limiter
Passive Limiter from 10 MHz to 62 GHz

Limiter  from Planar Monolithics Industries

The LM-10M62G-20DBM-1W-24FF from Planar Monolithics Industries is a Passive Limiter that operates from 10 MHz to 62 GHz. It can handle up to 1 W of CW and 4 W of pulse input power (pulse width of 1 µs and 1% duty cycle) and has a typical flat leakage power of +22 dBm. This limiter has a recovery time of less than 100 ns and an insertion loss of below 4 dB. It is available in a module with 2.4 mm (female) connectors.
Download Datasheet | Product Details
Waveguide Circulator
Double Ridge Waveguide Circulators from 8 to 18 GHz

Waveguide Circulator  from Space Machine & Engineering Corp.

The DFC Series from Space Machine and Engineering are Double Ridge Waveguide Circulators that operate from 8 to 18 GHz. They have an insertion loss of less than 0.5 dB and provide an isolation of 15 dB. The circulators can handle an average input power of 250 W, peak power of 2 kW and have a VSWR of under 1.45:1.
Download Datasheet | Product Details
Waveguide Coupler
Crossguide Directional Couplers from 18 to 110 GHz

Waveguide Coupler  from Ducommun

The PCC Series from Ducommun are Crossguide Directional Couplers that operate from 18 to 110 GHz in seven waveguide bands. They provide coupling from 15 to 30 dB with a directivity of 15 dB and have an insertion loss of less than 1 dB. The couplers are typically used for power sampling or frequency monitoring with minimum signal loss on the main transmitting path.
Download Datasheet | Product Details
RF Amplifier
Bi-Directional Amplifiers from 0.225 GHz to 5.875 MHz

RF Amplifier  from Pasternack Enterprises Inc

The Bi-Directional Amplifier Series from Pasternack operates over a frequency range from 0.225 GHz to 5.875 MHz covering VHF/UHF, L, S, and C bands. On the Tx side, they provide a saturated output power of up to 20 W with a gain of more than 45 dB to boost the performance of data links and transmitters. On the Rx side, they provide a gain of up to 30 dB with a noise figure less than 3.5 dB.
Download Datasheet | Product Details
RF Switch
High Power SPDT Tx/Rx Switch from 10 to 2500 MHz

RF Switch  from Amcom Communications

The AM002552S2-0H from AMCOM is an SPDT High Power Switch that operates from 10 to 2500 MHz. It can handle an input power of 150 W, has an insertion loss of less than 1.25 dB and provides an isolation of over 20 dB. This Tx/Rx switch has a switching time of less than 10 µs and uses TTL control logic to switch between ports. It requires a DC supply of +28V and draws less than 300 mA of current.
Download Datasheet | Product Details
Balun
Unbalanced to Balanced 1:1 SMT Balun from 5 to 200 MHz

Balun  from MiniRF

The RFXF0013 from MiniRF is an Unbalanced to Balanced SMT Transformer/Balun that operates from 5 to 200 MHz. This 1:1 transformer has an insertion loss of 0.5 dB and can handle 2 W of power. It has an amplitude balance of 0.2 dB and a phase balance of 2 degrees. This balun is available in an SMT package and is ideal for broadband/CATV and wireless communications systems.
Download Datasheet | Product Details
Wireless Charging Receiver
High Efficiency 40 W Receiver Controller for Wireless Power Systems

Wireless Charging Receiver  from Semtech

The TS81001 from Semtech is a communications and control receiver unit for wireless charging applications. It supports systems up to 40 W and is Qi® and PMA compliant. The receiver provides dual-mode Qi and proprietary functionality using a single LC resonant circuit. It supports indirect (fixed voltage) and single/multicell battery charging applications (>2.0V).
Download Datasheet | Product Details
RF Switch
Space Qualified SP4T RF Switch from DC to 4 GHz

RF Switch  from Analog Devices

The ADH244S from Analog Devices is a GaAs MMIC SP4T RF switch that operates from DC to 4 GHz. It has an insertion loss of less than 2 dB and provides an isolation of more than 22 dB. This switch requires a DC supply voltage of 5 V and consumes less than 7 mA of current. It has an integrated 2:4 TTL/CMOS compatible decoder and requires only 2 control lines and a positive supply voltage to select each path.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Low Phase Noise VCO from 4087 to 4088 MHz

Voltage Controlled Oscillator  from Z-COMM

The CRO4087B-LF from Z-Communications is a Voltage Controlled Oscillator with an output frequency from 4087 to 4088 MHz. It delivers an output power of +3.5 dBm, has a phase noise of -108 dBc/Hz @ 10 kHz offset and typical second harmonic suppression of -15 dBc. The VCO requires a DC supply of 8 V, draws 25 mA of current and has a DC tuning voltage from 0.5 to 4.5 V.
Product Details
Redundancy Switch
2x1 L-band SATCOM Redundancy Switch from DC to 2450 MHz

Redundancy Switch  from ETL Systems

The GRF-050 from ETL Systems is a 2x1 L-band SATCOM Redundancy Switch that operates from DC to 2450 MHz. It is a latching relay switch that can be used in individual or simultaneous modes with two module slots for multiple configurations. In manual mode, the switch may be triggered by front panel, RF level detection, alarm contacts or NMS.
Download Datasheet | Product Details
Base Station Antenna
8-port Multibeam Antenna from 3100 to 4200 MHz

Base Station Antenna  from CommScope

The 2SS-33A-R1 from CommScope is an 8-Port Multibeam Antenna that operates from 3100 to 4200 MHz. This ±45° polarized antenna provides a gain of up to 17.8 dBi and can handle an input power of up to 80 W per port. It has a horizontal beamwidth of 34-38 degrees, a vertical beamwidth of 8.5-9.9 degrees and a beam tilt of 2-12 degrees. The antenna has a VSWR of less than 1.5:1 and provides port to port an isolation of 25 dB.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]