PREV 28 April, 2021 NEXT

New RF and Microwave Products this Week

28 April, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 28 April, 2021
 
Sponsored by Tualcom
 
 
 
New RF and Microwave Products this Week
Band Pass Filter
Band Pass Filters with Customizable Center Frequency from 25 to 29 GHz

Band Pass Filter  from Wainwright Instruments

The WBEX5 Series from Wainwright Filters is a Band Pass Filter series with a customer defined center frequency (Fo) from 25 to 29 GHz and a bandwidth of 200 MHz (Fo ± 100 MHz). They have an insertion loss of less than 4.5 dB, can handle an input power of up to 10 W and have a VSWR of 1.5:1. The filters provide more than 30 dB of attenuation in the stopbands from DC to Fo - 300 MHz and from Fo + 300 MHz to 60 GHz.
Download Datasheet | Product Details
RF Amplifier
GaN Low Noise Amplifier from 8 to 11 GHz

RF Amplifier  from Qorvo

The QPL1000 from Qorvo is a GaN Low Noise Amplifier that operates from 8 to 11 GHz. It delivers a small signal gain of 27 dB with a noise figure of 1.7 dB. The LNA is fabricated using Qorvo’s production 0.25 um, GaN (Gen II) process which enables it to withstand an input power of up to 5 W, while delivering a saturated power of 15 dBm with low IM3 levels of -24 dBc (at Pout= +6 dBm / tone).
Download Datasheet | Product Details
RF Amplifier
Distributed Amplifier MMIC from 1.5 to 47 GHz

RF Amplifier  from OMMIC

The CGY2160UH_C1 from OMMIC is a Distributed Amplifier that operates from 1.5 to 47 GHz. It has an output P1dB of 0.05 W, a small signal gain of 14.5 dB and a noise figure of less than 4.5 dB. The amplifier has an on-chip bias network that includes a current control function that keeps the device operating close to the nominal biasing point over temperature and component dispersion.
Download Datasheet | Product Details
RF Spectrum Recording and Playback System
8-Channel Phase Coherent RF Signal Recorder from 30 MHz to 6 GHz

RF Spectrum Recording and Playback System  from Pentek

The RTR 2628 from Pentek is an 8 Channel Phase Coherent RF Signal Recorder that operates from 30 MHz to 6 GHz. It accepts signals from eight antennas to provide eight channels of phase-coherent RF signal recording. Each channel is tunable up to 6 GHz and captures up to 80 MHz of instantaneous bandwidth and can be set for phase-coherent operation or independent tuning.
Download Datasheet | Product Details
Switch Matrix
8x8 Bi-directional Blocking Switching Matrix from 100 kHz to 8.5 GHz

Switch Matrix  from Becker Nachrichtentechnik GmbH

The BSWM-8X8ER from Becker Nachrichtentechnik is an 8x8 blocking Switching Matrix that operates from 100 kHz to 8.5 GHz. It offers 8 fully parallel bi-directional signal paths making it suitable for bidirectional point to point links. The matrix can handle an input power of up to +30 dBm and provides high channel isolation to avoid unintended coupling between different types of signals.
Download Datasheet | Product Details
RF Variable Attenuator
USB Controlled Programmable Attenuator from 200 to 8000 MHz

RF Variable Attenuator  from JFW Industries

The 50P-2111 from JFW Industries is a Bi-Directional, Solid-State Programmable Attenuator that operates from 200 to 8000 MHz. It has an attenuation range from 0 to 95 dB with a step size of 1 dB (1, 2, 4, 8, 16 and 32 dB step options available). The attenuator has an insertion loss of less than 7 dB and a typical switching speed of 0.7 µs.
Download Datasheet | Product Details
Sponsored by Tualcom
 
 
 
Software Defined Radio
8-Channel RFSoC System-on-Module with 6 GHz Bandwidth

Software Defined Radio  from Avnet

The AES-XRF8-ZU47-G from Avnet is an RFSoC System-on-Module with an analog bandwidth of 6 GHz. The module can digitize 8 ADC channels at 6 giga-samples per second (GSPS) and generate complex (I/Q) waveforms through 8 DAC channels at 10 GSPS. This module is ideal for phased array radars, 5G massive MIMO, hybrid beamforming, signal detection and jamming, medical imaging, and multi-channel RF instrumentation.
Download Datasheet | Product Details
RF Switch
SP6T Silicon PIN Diode Common Cathode Switch from 30 to 512 MHz

RF Switch  from RFuW Engineering

The MSW6T-6040-600 from RFuW Engineering is a PIN Diode based SP6T Switch that operates from 30 to 512 MHz. It can handle an average input power of 56 dBm, has an insertion loss of less than 0.5 dB and an isolation over 25 dB. The switch has a switching time of less than 3 µs. It is available in a surface-mount package that measures 8.0 x 8.0 x 2.5 mm.
Download Datasheet | Product Details
RF Switch
Ultra-low Loss, Failsafe SPDT Switch from 0.1 to 6 GHz

RF Switch  from Guerrilla RF

The GRF6011W from Guerrilla RF is a linear, ultra-low loss SPDT Switch that operates from 0.1 to 6.0 GHz. It has been designed with failsafe characteristics when all voltage inputs are removed. When powered down (Failsafe mode), one path defaults to a high insertion loss state while the other path defaults to a low insertion loss state that retains high linearity.
Download Datasheet | Product Details
RF Amplifier
400 W LDMOS SSPA from 80 to 1000 MHz

RF Amplifier  from Exodus Advanced Communications

The AMP2032LC from Exodus Advanced Communications is an LDMOS Solid-State Power Amplifier (SSPA) that operates from 80 to 1000 MHz. It delivers a saturated output power of 400 W with a gain of 54 dB (20 dB gain adjustment range). The amplifier is suitable for all single channel modulation standards. It is available in a rack-mount enclosure that measures 430 x 133 x 560 mm with N-type (female) connectors and has Ethernet RJ-45 TCP/IP, RS422/485 and USB interfaces. The amplifier can be used for broadband EMI/RFI, Lab and communication applications.
Download Datasheet | Product Details
RF Amplifier
5000 W Solid State Power Amplifier from 10 kHz to 225 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 5000A225B from AR RF/Microwave Instrumentation is a Solid State Power Amplifier that operates from 10 kHz to 225 MHz. This self-contained, air-cooled, broadband amplifier when used with a sweep generator provides 5000 W of output power with a gain of over 67 dB. All amplifier control functions and status indications can also be viewed/controlled remotely using the GPIB/IEEE-488 format, RS-232, fiber optics, USB, and Ethernet.
Download Datasheet | Product Details
RF Amplifier
2600 W GaN HEMT D-Mode Amplifier from 960 to 1215 MHz

RF Amplifier  from MACOM

The MAPC-A1500 from Macom is a GaN HEMT D-Mode Amplifier that operates from 960 to 1215 MHz. It provides a pulsed output power of 2600 W (64.1 dBm) with a gain of 18.5 dB. The amplifier requires a DC supply of 65 V and has a junction temperature of 0.07 C/W. It is available in an air cavity ceramic package that is ideal for avionics, and IFF transponders.
Download Datasheet | Product Details
Sponsored by Tualcom
 
 
 
Front End Module
Front-End RFIC for Bluetooth Range Extension

Front End Module  from BeRex, Inc.

The 8TR1218 from Berex is a Bluetooth LE Smart Front-end RFIC that is designed for range extension of Bluetooth Smart, 802.15.4, ZigBee/Thread, ANT+ and proprietary ISM wireless systems that operate in the 2.4 GHz band. It consists of an integrated power amplifier (PA), a bi-directional bypass, a transmit/receive (T/R) switch, filter networks, and input/output matching circuitry.
Download Datasheet | Product Details
Waveguide Isolator
1.3 W Faraday Rotation Isolator from 75 to 110 GHz

Waveguide Isolator  from Micro Harmonics

The FR100M2 from Micro Harmonics is a Faraday Rotation Isolator that operates from 75 to 110 GHz. It provides an isolation of over 18 dB and has an insertion loss of less than 1.8 dB. The isolator can handle up to 1.3 W of power and has a VSWR of less than 1.4:1. It is available in a module that measures 0.750 x 0.750 x 0.658 inches and has WR-10 waveguide interfaces.
Download Datasheet | Product Details
RF Amplifier
Cryogenic Amplifier from 8 to 12 GHz

RF Amplifier  from AmpliTech

The APTC2-08001200-1500-D2 from AmpliTech is a Cryogenic Amplifier that operates from 8 to 12 GHz. It provides a gain of over 22 dB with a noise figure of less than 1.5 dB and has a P1 dB of 6.5 dBm (-200 ºC). This amplifier requires a DC supply of 3 V and consumes up to 40 mA of current. It is available in a drop-in package with SMA male/female connectors.
Download Datasheet | Product Details
RF & Microwave Circulator
100 W Drop-In Circulator from 860 to 960 MHz

RF & Microwave Circulator  from VidaRF

The VDC-086096 from VidaRF is a Drop-In Circulator that operates from 860 to 960 MHz. It has an insertion loss of 0.5 dB and an isolation of 20 dB. The circulator can handle up to 100 watts of forward power, 500 watts of peak power, and has a VSWR of less than 1.25:1. This RoHS-compliant circulator is available in a module that measures 25.4 x 25.4 x 7.62 mm with connectors.
Download Datasheet | Product Details
Tunable Filter
Tunable RF Filter from 1.5 to 30 MHz for Ground and Airborne Systems

Tunable Filter  from Netcom

The Model 5555-3 from Netcom is a Tunable RF Filter with a passband from 1.5 to 30 MHz and a typical bandwidth of 3.1%. It can handle an input power of up to 30 dBm, has an insertion loss of less than 7.5 dB. The filter has been designed using three bands of tunable filters. It has a tuning speed of less than 200 µs and can be controlled via an SPI interface.
Download Datasheet | Product Details
TCXO
25 MHz MEMS Temperature Controlled Crystal Oscillator (TCXO)

TCXO  from SiTime

The SiT5356 from SiTime is a MEMS Temperature Controlled Crystal Oscillator (TCXO) with a frequency of 25 MHz. It delivers an LVCMOS output with stability of 100 ±ppm and has a phase noise of -168 dBc/Hz at 5 MHz offset. This oscillator requires a DC supply of 3.3 V and consumes less than 57 mA of current.
Download Datasheet | Product Details
OCXO
High Stability OCXO with Low Phase Noise from 30 to 100 MHz

OCXO  from Golledge

The HCD280 from Golledge is an Oven Controlled Crystal Oscillator (OCXO) that operates from 30 to 100 MHz. It has frequency stability of better than 500 ppb per year and temperature stability of up to ±10 ppb. The OCXO provides a sine wave or CMOS output with harmonic distortion of -30 dBc and spurious levels of less than -80 dBc.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-S870 from RF Electronic is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides more than 90 dB of isolation. The enclosure has shielded power filters for providing power connections in the box while blocking all wireless signals. It has a number of I/O interface options that include HDMI, RJ45, USB, DB9, VGA, DB25, and AC/DC.
Download Datasheet | Product Details
RF Variable Attenuator
70 dB Manually Variable Attenuator from DC to 2.5 GHz

RF Variable Attenuator  from Broadwave Technologies

The 751-004-070 from Broadwave Technologies is a Manual Variable Attenuator that operates from DC to 2.5 GHz. It provides up to 70 dB of attenuation in 10 dB steps with an accuracy of ± 0.5 dB or 3 % (whichever is greater). The attenuator can handle an average input power of 2 W, has an insertion loss of less than 0.6 dB, and a VSWR of 1.5:1.
Download Datasheet | Product Details
Antenna
Multiband Puck-Style Antenna for Wi-Fi 6 & Wi-Fi 6E Applications

Antenna  from Linx Technologies

The ANT-W63-SPS1 from Linx Technologies is an External Panel Mount Puck-Style Antenna that operates from 2400 - 2485 MHz / 5150 - 5850 MHz / 5925 - 7125 MHz. This linearly polarized antenna provides a peak gain of 5.1 dBi @ 5150 - 5850 MHz with an efficiency of 44%. It is designed for excellent performance in the 2.4 GHz, 5 GHz and 6 GHz bands supporting both Wi-Fi 6 and Wi-Fi 6E.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]