PREV 17 May, 2021 NEXT

Latest News & White Papers this Week

17 May, 2021 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 17 May, 2021
 
Sponsored by STMicroelectronics
 
 
 
Latest News this Week
World's Lowest Power Wireless Chip for IoT Applications - Jeeva
New Spectrum Analyzer Enables Customers to Test mmWave Innovations in 5G, A&D and SATCOM - Keysight Technologies
Graphene to Play an Integral Role in 6G Technology - IDTechEx
The Zigbee Alliance Rebrands as Connectivity Standards Alliance, Project CHIP Rebranded as Matter - Zigbee Alliance
Pentagon Looking for Cheap, Ground-Launched and Hand-Held Counter-Drone Solutions - Pentagon
New Spectrum Monitoring and Recording Solution with 16 Independent Channels from DC to 18 GHz - Per Vices
ADI Introduces Highly-Integrated RF Transceiver for 3G/4G/5G TDD and FDD Massive MIMO Applications - Analog Devices
Sivers Semiconductors Introduces 2D 60 GHz Beamforming RF Module for Fixed Wireless Access - Sivers Semiconductors
Use this Tool from Antenova to Figure out Antenna Selection and Placement - Antenova
UScellular Achieves 7 km mmWave 5G Connection on a Commercial Network - Ericsson
Anritsu and Orolia Launch 5G Assisted GPS Solutions for North American Carrier Acceptance Testing - Anritsu
Molex Leveraging In-House Test Labs to Tackle EMC/EMI Design Challenges - MOLEX
More News
New White Papers & Articles
Going Beyond 6 GHz | How Wi-Fi 6E Is Reshaping RF Security Requirements - thinkRF
Analysis of a Terahertz Dual-Band, Dielectric-Loaded Horn Antenna - Remcom
Solving RF Isolation Issues with RF Inductors - Coilcraft
Microwave Power Dividers and Couplers Tutorial - Marki Microwave
Learn How PLL/VCO Technology Has Increased Performance, Decreased Size, and Simplified Design Cycles - Analog Devices
More White Papers
Sponsored by STMicroelectronics
STMicroelectronics
Programmable Wireless Processor Module for Bluetooth Low Energy 5.2
Cut the wire and add BLE 5.2 connectivity to your application. Featuring valued services and a hassle-free integration, our BlueNRG-M2 wireless module improves range, speed, and security in addition to multi-nodes and Mesh networking. Comes pre-certified and ready for action in most regions. Click here to learn more.
 
Upcoming Event
Event Image
CS MANTECH 2021
Date: 24 to 27 May 2021
Location: Digital / Virtual Format
More Events
Featured Products this Week
Wireless SoC
Wireless SOCs for ZigBee Green Power IoT Applications

Wireless SoC  from Silicon Labs

The EFR32MG22 Series from Silicon Labs are 2.4 GHz Wireless SOCs optimized for ZigBee Green Power IoT applications. These modules are based on Silicon Labs' Wireless Gecko Series 2 platform and are an ideal choice for Zigbee devices powered by coin cell batteries or energy-harvesting sources. Target applications include smart home sensors, lighting controls, and building and industrial automation.
Download Datasheet | Product Details
RF Module
Compact Bluetooth 5.0 Module for IoT Applications

RF Module  from Fujitsu

The FWM7BLZ20B from Fujitsu is a Bluetooth 5.0 module for IoT applications that can simultaneously connect with up to 8 peripheral devices. It is based on the low-power nRF52832 Nordic chipset and supports a data rate of up to 2 Mbps. It provides an output power of 4 dBm and has a receive sensitivity of -94 dBm. It requires a 3.6V DC supply and has a current consumption of 17.1 mA while transmitting and 8 mA while receiving.
Download Datasheet | Product Details
RF Transceiver
Advanced Reconfigurable RF Transceiver from 10 MHz to 4 GHz

RF Transceiver  from BAE Systems

The MATRICs from BAE Systems is an Advanced Reconfigurable RF Transceiver chipset that addresses future requirements of communications, electronic warfare, and signal intelligence systems. It operates from 10 MHz to 4 GHz and enables engineers to develop customized radio systems in the field, without the need for modified, application-specific chips that are expensive and time-consuming to develop.
Download Datasheet | Product Details
GNSS Anti-Jamming Solution
GPS/GLONASS Anti-Jamming Antenna and Receiver

GNSS Anti-Jamming Solution  from Meteksan Defence Industry Inc

The Anti-Jamming/Anti-Spoofing Antenna and Receiver from Meteksan Defence can be used for GPS L1, GPS L2, and GLONASS L1 frequency bands. It determines and suppresses jamming signals by using spatial filtering and provides resistance against more than one jammer signal. The built-in GNSS receiver is capable of decoding GPS satellite signals for calculating position, velocity, and time information.
Download Datasheet | Product Details
RF Transistor
1200 W Pulsed Power LDMOS Transistor from 900 to 1215 MHz

RF Transistor  from NXP Semiconductors

The MMRF1312H from NXP Semiconductors is a Pulsed Power LDMOS Transistor that operates from 900 to 1215 MHz. It delivers a peak output pulse power of up to 1200 W with a gain of 19.2 dB and an efficiency of more than 54%. This Class AB transistor provides a pulse width of 128 µs and has a duty cycle of 10%. It can be used in a single-ended, push-pull or quadrature configuration.
Download Datasheet | Product Details
RF Transistor
2.9 W GaN HEMT Power Amplifier from 0.5 to 3 GHz

RF Transistor  from Wolfspeed, A Cree Company

The CMPA0530002S from Wolfspeed is a GaN HEMT Power Amplifier that operates from 0.5 to 3 GHz. It provides a saturated output power of up to 2.9 W with a small signal gain of over 18 dB and has a PAE of up to 56.2%. The amplifier requires a DC supply of 28 V. It has been designed specifically for high efficiency, high gain, and wide bandwidth applications including ISM, EW, broadband amplifiers, and civil & military applications.
Download Datasheet | Product Details
Sponsored by STMicroelectronics
 
 
 
Low Pass Filter
Thin Film Surface-Mount Band-Pass Filter from 6.3 to 9.2 GHz

Low Pass Filter  from Mini Circuits

The ABF-7R75G+ from Mini Circuits is a Thin-Film Band Pass Filter with a passband from 6300 to 9200 MHz. It has an insertion loss of less than 2.5 dB and provides a stopband rejection of 50 dB. It can handle up to 1 W of RF input power and operates over a temperature range from -55 to +125°C. The low insertion loss and high rejection is realized via a Thin-Film on Alumina substrate, using a sputtering process that can guarantee an enhanced Q and repeatable performance.
Download Datasheet | Product Details
RF Mixer
Rad-Tolerant Double-Balanced Diode Mixer from 18 to 46 GHz

RF Mixer  from Teledyne e2v HiRel Electronics

The TDMX011037 from Teledyne e2v HiRel Electronics is a Double-Balanced Passive Diode Mixer with an LO/RF frequency from 18 to 46 GHz and an IF frequency from DC to 20 GHz. It has a conversion loss of less than 12 dB and an LO to RF isolation of 35 dB. The mixer is ideal for use in Ku/Ka-band orbital transmit/receive modules and satellite microwave communication applications.
Download Datasheet | Product Details
Signal Generator
Multi-Channel, Phase Coherent, RF Frequency Synthesizers from 10 MHz to 40 GHz

Signal Generator  from Holzworth Instrumentation

The HSX Series from Holzworth Instrumentation are broadband, phase-coherent frequency sources available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz, and 40 GHz. They have industry-leading phase noise and spectral purity performance coupled with a highly accurate dynamic range from -110 to 20 dBm.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Computer Controlled Metrology-Grade VNA from 300 kHz to 18 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The M5180 is a 2-port compact metrology-grade performance VNA from Copper Mountain Technologies that operates from 300 kHz to 18 GHz. This VNA is available in a more economical package that excludes a number of advanced features. It has a dynamic range of 130 dB and can measure up to 200,001 test points with a speed of 30 µs per point.
Download Datasheet | Product Details
Termination
SMP Terminations from DC to 18 GHz for 5G Applications

Termination  from Cinch Connectivity Solutions

The TRM-2109-XX-SMP-09 Series from Midwest Microwave are 5G SMP Terminations that operate from DC to 18 GHz. They are matched to 50 ohms, can handle up to 2 W of average input power and have a VSWR of less than 1.2:1. This termination series compliments the SMP offering of its sister brand, Johnson, for 5G markets. They are MIL-STD-348A certified and available with SMP-Male and SMP-Female connectors.
Download Datasheet | Product Details
RF Amplifier
Solid-State Medium Power Amplifier from 18 to 40 GHz

RF Amplifier  from Exodus Advanced Communications

The MPA3003-1 from Exodus Advanced Communications is a Solid State Low Noise Power Amplifier that operates from 18 to 40 GHz. This amplifier provides 23 dBm of saturated output power with a power gain of over 40 dB. It operates over a DC supply voltage from 15 to 18 V and consumes less than 3 amps of current.
Download Datasheet | Product Details
RF Amplifier
Benchtop Power Amplifier from 6 to 18 GHz for EMC Applications

RF Amplifier  from RF-Lambda

The REMC06G18GG from RF-Lambda is a solid-state power amplifier that operates from 6 to 18 GHz. It provides a saturated output power of 55 dBm with a gain of 77 dB. The amplifier is available as a benchtop module with N-type female connectors and is ideal for Military & Defense, Wireless Infrastructure, and Test and Measurement applications.
Download Datasheet | Product Details
Signal Generator
Vector Signal Generator from 100 kHz to 44 GHz

Signal Generator  from Rohde & Schwarz

The R&S SMM100A from Rohde & Schwarz is a Vector Signal Generator that operates from 100 kHz to 44 GHz. It can be used for a wide range of applications including existing wireless standards and 5G NR FR1 in the Sub-6GHz band, Wi-Fi 6E up to 7.125 GHz and 5G NR FR2 bands up to 44 GHz. This signal generator offers a maximum output power of +18 dBm, which reduces the need for external amplifiers.
Download Datasheet | Product Details
Power Divider
4-Way Broadband Power Divider from 0.5 to 8 GHz

Power Divider  from MECA

The 804-2-4.250 from MECA is a 4-Way Broadband Power Divider that operates from 0.5 to 8 GHz. It has an insertion loss of less than 3.3 dB and provides isolation of 21 dB. The splitter has an amplitude balance of 0.6 dB and a phase balance of less than 12 degrees. It can handle an input power of up to 30 W and has a VSWR of less than 1.6:1. The divider is available in a module with SMA Female connectors.
Download Datasheet | Product Details
Balun
Sub-miniature Unbalanced to Balanced Balun from 17 to 23.6 GHz

Balun  from Anaren Inc

The BD170240N50100AHF from Anaren is a Sub-miniature Unbalanced to Balanced Balun that operates from 17 to 23.6 GHz. It is designed for differential inputs and output locations on modern chipsets in an easy-to-use surface mount package. The low-profile balun has an unbalanced port impedance of 50 Ohm and a balanced port impedance of 100 Ohm.
Download Datasheet | Product Details
DC Block
1.85 mm Broadband Inner DC Block from 35 kHz to 67 GHz

DC Block  from HYPERLABS

The HL9437 from HYPERLABS is a 1.85 mm Broadband Inner DC Block that operates from 35 kHz to 67 GHz. It is available with a breakdown voltage of 11 V (opt. -11) or 30 V (opt.-30). The DC block has an insertion loss of less than 1 dB, and a rise time of 5 ps. It has an amplitude match of ±0.1 dB and a phase match of ±4° at 40 GHz.
Download Datasheet | Product Details
Fixed Attenuator
3/6/10/20 dB Fixed Attenuators from DC to 40 GHz

Fixed Attenuator  from L3Harris Narda-MITEQ

The 4777 Series from L-3Harris Narda-ATM are Medium Power Fixed Attenuators that operate from DC to 40 GHz. They are available in attenuation configurations of 3/6/10/20 dB and have a VSWR of less than 1.4:1. The attenuators can handle an average input power of up to 6 W and a peak input power of 0.2 kW. These small-sized and light-weighted attenuators are available in a connectorized module with 2.92 mm (M/F) connectors.
Download Datasheet | Product Details
RF Switch
Solid-State SPDT Switch from 3 to 30 MHz for Military Applications

RF Switch  from Comtech PST

The HH20-202 from COMTECH PST is a Solid-state SPDT Switch that operates from 3 to 30 MHz and is designed for cold-switched operations only. It can handle a peak input power of 1600 W, an average input power of 32 W and a CW input power of 200 W. It requires DC supply of 5/28 V and draws under 750 mA of current.
Download Datasheet | Product Details
Antenna
Multi-Band MIMO Antenna for Cellular/Wi-Fi/GNSS Applications

Antenna  from PCTEL

The GL7X1-IOTCM-5FT from PCTEL is a Multi-Band Low Profile MIMO Antenna for 5G/LTE, 802.11ac Wi-Fi and GNSS applications. It operates at frequencies from 617-960 MHz, 1.71-2.70 GHz, 2.4-2.5 GHz, 3.4-3.8 GHz, 4.9-5.9 GHz, 5.15-5.95 GHz for RF (cellular & Wi-Fi) communications, and at 1565-1608 MHz for GNSS communications.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]