PREV 26 May, 2021 NEXT

New RF and Microwave Products this Week

26 May, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 26 May, 2021
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
Frequency Synthesizer
Pre-Configured Phased-Locked Oscillators from 1.9 to 45 GHz

Frequency Synthesizer  from TMYTEK

The MFSO Series from TMYTEK are Phased-Locked Oscillators (PLO) that are available in three frequency options: 1.925 - 16 GHz, 16 - 32 GHz, and 32 - 45 GHz. Each PLO can have up to 32 pre-configured frequencies within it that can be selected digitally. They have excellent phase noise performance and can be used for a wide range of applications including the various 5G frequency bands.
Download Datasheet | Product Details
Band Pass Filter
Bandpass Filter from 37 to 41 GHz for mmWave Applications

Band Pass Filter  from Cubic Nuvotronics, Inc.

The PSF39B04S from Cubic Nuvotronics is a Ka-Band Bandpass Filter with a passband from 37 to 41 GHz. It can handle a CW input power of 2 W, has an insertion loss of less than 2.2 dB, and provides a rejection of over 30 dB above and below the passband. This surface-mount interdigital filter offers excellent flatness and high-frequency performance.
Download Datasheet | Product Details
RF Inductor
22 nH to 51 nH Miniature Ceramic Chip Inductors

RF Inductor  from Coilcraft

The 0201HL Series from Coilcraft are Ceramic Chip Inductors with inductance values from 22 to 51 nH. These inductors have twice the Q factor when compared to inductors of the same size based on thin-film technology. They have a Self-Resonance Frequency (SRF) from 3.25 to 4.35 GHz and a DC resistance of less than 1.85 Ohms.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port USB Vector Network Analyzer, 100 kHz to 20 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The C4220 from Copper Mountain Technologies is a 2-port modular vector network analyzer that operates from 1 kHz to 20 GHz. The VNA can measure all four S parameters S11, S12, S21, S22 and can be controlled using any Windows PC or laptop. It has a dynamic range of up to 133 dB (1Hz IF BW), directivity of 46 dB and sweep speeds of 12 microseconds per point.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 6 GHz (Optional to 24 GHz) Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062C from Holzworth is a real time fully integrated phase noise analysis system that operates from 10 MHz to 6 GHz. It utilizes the same core engine from the HA7402C analyzer along with a pair of high performance RF Synthesizers as the test signal LOs. The stability of the agile synthesizers operating as LO sources for the high speed, cross-correlation core enables an extremely reliable phase noise analyzer.
Download Datasheet | Product Details
RF Amplifier
28 W Power Amplifier from 30 to 31 GHz for Military and Space Applications

RF Amplifier  from ERZIA

The ERZ-HPA-3000-3100-46 from ERZIA is a High-Power Amplifier that operates from 30 to 31 GHz. It delivers a saturated output power of 44.5 dBm with a gain of more than 44 dB and has a VSWR of less than 1.8:1. The amplifier has a TTL control with a switch ON/OFF time of 200/1000 ns. It requires a DC supply voltage of 24 V and consumes under 5 W of power.
Download Datasheet | Product Details
Sponsored by Mouser
GaN Amplifier
2GHz to 20GHz 10W GaN Amplifier
Qorvo QPA2962 GaN Amplifier is a wideband power amplifier fabricated on Qorvo's QGaN15 GaN on Silicon Carbide (SiC) process. The amplifier operates from 2GHz to 20GHz frequency bandwidth and provides 10W of saturated power with 13dB large signal gain and 22% power-added efficiency at 22V drain bias. Click here to learn more.
 
RF Amplifier
8000 W Pulsed Amplifier System from 1 to 2 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 8000SP1G2 from AR RF/Microwave Instrumentation is a Broadband Solid-state Microwave Amplifier System that operates from 1 to 2 GHz. It provides a pulsed output power of over 8000 Watts and can be used for a variety of applications in Test and Measurement, (including EMC RF pulse susceptibility testing), Industrial and University R&D, and other general-purpose applications.
Download Datasheet | Product Details
RF Amplifier
100 W LDMOS Solid-State Power Amplifier from 10 kHz to 1000 MHz

RF Amplifier  from Exodus Advanced Communications

The AMP2142DB-100 from Exodus Advanced Communications is an LDMOS Solid-State Power Amplifier that operates from 10 kHz to 1000 MHz. This Class A/AB amplifier delivers a minimum saturated output power of 100 W with a gain of more than 50 dB. It has typical harmonics of -20 dBc and spurious of up to -60 dBc. It is suitable for all single channel modulation standards and has built-in protection circuits.
Download Datasheet | Product Details
Software Defined Radio
16x16 Direct-RF Sampling Module with 5 GHz Analog Bandwidth

Software Defined Radio  from Avnet

The XRF16 from Avnet is a 16x16 Direct-RF Sampling Module with a 5 GHz Analog Bandwidth. It is designed for integration into deployed RF systems demanding a small footprint, low power, and real-time processing. The XRF16 features the Xilinx Zynq® UltraScale+™ RFSoC Gen 2, with 16 RF-ADC and 16 RF-DAC channels. The 12 Bit ADCs support up to 2.220 GSPS and the 14-bit DACs support up to 6.554 GSPS.
Download Datasheet | Product Details
Cellular Module
5G NR Sub-6 GHz Module with 4G LTE/3G Fallback

Cellular Module  from Sierra Wireless

The AirPrime EM9191 from Sierra Wireless is a 5G NR Sub-6 GHz Module that supports 4G LTE and 3G fallback. It delivers a downlink data rate of up to 4.5 Gbps and an uplink data rate of up to 660 Mbps. This module delivers a Tx power of up to 25 dBm and has an Rx sensitivity of up to -112.5 dBm. It requires a DC supply of 3.3 V and consumes up to 2.7 A of current.
Download Datasheet | Product Details
Cellular Module
Multi-Band LTE Cat 1 Cellular Module for IoT Applications

Cellular Module  from SIMCom

The A7672X from SIMCom is a Multi-Band LTE Cat 1 Cellular Module that supports LTE-FDD/GSM/GPRS/EDGE bands. It delivers an uplink data rate of 5 Mbps (LTE), 236.8 Kbps (GPRS/EDGE), and a downlink data rate of 10 Mbps (LTE) & 236.8 Kbps (GPRS/EDGE). This module requires a DC supply of 3.4-4.2 V and can be controlled via UART, USB 2.0, GPIO, ADC, and I2C interfaces.
Download Datasheet | Product Details
RF Switch
High-Power Reflective SPDT Switch from 2.3 to 4.2 GHz

RF Switch  from Skyworks Solutions

The SKY12248-492LF from Skyworks is a Compact Reflective SPDT Switch that operates from 2.3 to 4.2 GHz. It can handle an input power of up to 120 W with a case temperature of 120 °C. The switch can be tuned to specific RF bands within the operating frequency by modifying select external SMT components. The switch is available in a 20-pin QFN package that measures 5.0 x 5.0 x 1.5 mm.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
Signal Generator
Integrated Stabilized RF Source from 30 to 36 GHz

Signal Generator  from dB Control

The dB-9005 from dB Control is an Integrated Stabilized RF Source that generates a signal from 30 to 36 GHz. It provides an output power of up to 17 dBm and has digital amplitude control of up to 50 dB using an 8-bit control word with an LSB of 0.125 dB, and digital ON/OFF pulse control of up to -60 dBm when OFF. The RF Source has a switching speed of 1 µs with an accuracy of ±1 MHz.
Download Datasheet | Product Details
Handover Test System
4 x 4 Handover Test System from 698 to 3000 MHz

Handover Test System  from JFW Industries

The 50PA-1089 from JFW Industries is a 4 x 4 Handover Test System that operates from 698 to 3000 MHz. Handover test systems are used to assess the performance of interconnected wireless devices under real-world operating conditions in a lab environment. Every RF path through the 4 x 4 matrix has its own individually controlled programmable attenuator that provides an attenuation from 0 to 127 dB with a step size of 1 dB.
Download Datasheet | Product Details
RF Spectrum Analyzer
RF Spectrum Analyzer from 450 MHz to 40 GHz for 5G FR1/FR2

RF Spectrum Analyzer  from EXFO Inc

The 5GPro Spectrum Analyzer from EXFO is a Dual-band RF Spectrum Analyzer that operates at the two frequency bands, 450 MHz to 6 GHz (5G FR1 - Low & Mid-band) and 24.25 to 40 GHz (5G FR2 - mmWave). It has a signal analysis bandwidth of up to 100 MHz and can handle an input power of up to 30 dBm. It can be used for spectrum clearing, 5G and 4G/LTE cell site installation.
Download Datasheet | Product Details
Power Divider
2 Way Power Divider from 698 to 2700 MHz

Power Divider  from VidaRF

The VPD-0627N2 from VidaRF is a 2-Way Power Divider that operates from 698 to 2700 MHz. This power divider can handle up to 50 watts of power and has a low insertion loss of 0.5 dB and high isolation of over 22 dB. It has excellent amplitude and phase balance. The power divider is available in a module with N-type female connectors.
Download Datasheet | Product Details
Switch Matrix
Dual SP8T Switch Matrix from DC to 26.5 GHz

Switch Matrix  from Mini Circuits

The RCM-2SP8T-26 from Mini-Circuits is an Dual Mechanical SP8T absorptive Switch Matrix that operates from DC to 26.5 GHz. It can handle up to 20 W of input power, has an insertion loss of less than 1.10 dB and provides 70 dB of isolation. The switch matrix consists of a pair of independently controlled, electro-mechanical SP8T switches.
Download Datasheet | Product Details
Directional Coupler
10 dB Directional Coupler from 18 to 40 GHz

Directional Coupler  from MECA

The 765-10-29.000 from MECA is a 5G ready millimeter-wave coupler that operates from 18 to 40 GHz. It has a coupling factor of 10 dB with a directivity over 12 dB and an insertion loss of 1.3 dB. The coupler can handle an average power of up to 20 watts and has a VSWR of 1.80:1. The 765-10-29.000 is available in a module with 2.92mm female connectors.
Download Datasheet | Product Details
Power Divider
4 Way Matched-line Directional Power Divider from 1 to 40 GHz

Power Divider  from KRYTAR

The 7010400 from KRYTAR is a 4-Way RF Power Divider that operates from 1 to 40 GHz. It can handle up to 10 W of input power, has an insertion loss of less than 6.5 dB, and provides isolation over 11 dB. The power divider has an amplitude tracking of ±1.5 dB and a phase tracking of ±22°. It is available in a compact package that measures 4.5 x 2.5 x 0.4 inches and has standard 2.4-mm coaxial female connectors.
Download Datasheet | Product Details
RF Amplifier
Low Noise Cryogenic Amplifier from 4 to 8 GHz

RF Amplifier  from Low Noise Factory

The LNF-LNR4_8ART from Low Noise Factory is a Low Noise Cryogenic Amplifier that operates from 4 to 8 GHz. It provides a gain of 42 dB with a noise figure of 0.45 dB and has a noise temperature of 32 K. The LNA is based on an InP HEMT process with a P1dB of 0 dBm and ensures low noise and low power dissipation during operation. The amplifier requires a DC supply of 5 V and consumes 50 mA of current.
Download Datasheet | Product Details
RF Amplifier
Power Amplifier Module from 2 to 18 GHz

RF Amplifier  from Amcom Communications

The AM02018026MD-2H from AMCOM Communications is a Power Amplifier Module that operates from 2 to 18 GHz. It delivers a saturated output power of 26 dBm with a small signal gain of more than 20 dB. The amplifier can handle an input power of +10 dBm and has TTL control logic. It includes a temperature monitor with thermal shutdown for any temperature higher than 95°C.
Download Datasheet | Product Details
Laminate
Low-Loss Prepeg for 5G and mmWave Applications

Laminate  from Rogers Corporation

The SpeedWave™ 300P from Rogers Corporation is a low dielectric constant, ultra-low loss resin system prepreg. It exhibits excellent fill and flow capability around heavy copper features, a low z-axis expansion for plated through hole reliability, and is CAF resistant. The SpeedWave 300P offers a typical dielectric constant of 3.16 and a dissipation factor of 0.0021 at 10 GHz with stable performance over a broad frequency range.
Download Datasheet | Product Details
Antenna
Linearly Polarized Directional Patch Antenna from 1.7 to 2.5 GHz

Antenna  from Southwest Antennas

The 1004-034 from Southwest Antennas is a directional patch antenna that operates from 1.7 to 2.5 GHz. This linearly polarized antenna provides a gain of up to 9.8 dBi and has a VSWR of less than 1.5:1. It has a horizontal beamwidth from 61 to 73 degrees and a vertical beamwidth from 54 to 62 degrees. It is ideal for law enforcement, military / DOD, broadcast video, and 2.4 GHz ISM-band applications.
Download Datasheet | Product Details
RF Capacitor
10 nF Ultra-Broadband Capacitor from 160 kHz to 70 GHz

RF Capacitor  from AVX Corporation

The 550Z Series from AVX Corporation are Microwave Multilayer Capacitors (MLCs) that operate from 160 kHz to 70+ GHz. They have a capacitance of 10 nF and an insertion loss of less than 0.4 dB. These MLCs can handle DC voltages up to 10 V and have a dielectric withstanding voltage of 250% rated voltage for 5 seconds.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]