PREV 2 June, 2021 NEXT

New RF and Microwave Products this Week

2 June, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 2 June, 2021
 
Sponsored by MilliBox
 
 
 
New RF and Microwave Products this Week
Delay Line
Dual-Channel Programmable Delay Line from DC to 18 GHz

Delay Line  from Colby Instruments

The XT-200 from Colby Instruments is a Programmable Delay Line that provides wideband electrical signal delay (phase shift) with excellent resolution from DC to 18 GHz. The delay line combines two electro-mechanical trombones separately and in parallel to offer 0 to 625.0 ps of total delay in each channel of the dual-channel unit. Each trombone/channel is independently controlled and can be independently addressed.
Download Datasheet | Product Details
RF Inductor
7 mm Tunable RF Inductors from 50 to 500 nH

RF Inductor  from Coilcraft

The “Unicoil” 7 mm Series from Coilcraft are Tunable RF Inductors that provide inductance values from less than 50 nH to over 500 nH. They provide the compactness of a 7 mm coil and the low drift reliability of an insert molded coil. These inductors are tuned by means of a threaded powdered iron core with a slotted socket.
Download Datasheet | Product Details
RF Amplifier
350 W / 550 W / 1 kW X-band Solid State Power Amplifier

RF Amplifier  from Teledyne Defence & Space (TDS)

The X-band SSPA Series from Teledyne Defence & Space (TDS) are Solid State Power Amplifiers that operate from 9 to 10 GHz. They are available in three different peak output power ratings of 350W, 550W and 1kW with a duty cycle of 10 % and a gain of over 55.5 dB. Available in a compact, environmentally sealed housing, these SSPAs can be used in any airborne or ground-based environment.
Download Datasheet | Product Details
Front End Module
5 GHz Integrated Front-End Module for Wi-Fi 6 Home Mesh Networks

Front End Module  from Qorvo

The QPF7551 from Qorvo is a 5 GHz Integrated Front-End Module that is designed for Wi-Fi 6 Home Mesh Networks. It is based on Qorvo’s bandBoost technology that maximizes the capacity and range by boosting band isolation in distributed Wi-Fi 6 systems. The FEM consists of a 5 GHz power amplifier, UNII1- 2a bandBoost BAW filter, SP2T switch, and bypassable low noise amplifier (LNA).
Download Datasheet | Product Details
Band Pass Filter
Wi-Fi Coexistence BAW Filter with Passband from 5170 to 5330 MHz

Band Pass Filter  from Akoustis

The A10252 from Akoustis is a Wi-Fi Coexistence BAW Filter with a passband from 5170 to 5330 MHz. It can handle up to 30 dBm of input power, has a passband insertion loss of 1.5 dB, and provides an attenuation of more than 35 dB in the stopband. This filter utilizes Akoustis’ patented, XBAW technology which provides excellent RF filter performance.
Download Datasheet | Product Details
RFID Tag
NFC/RAIN RFID Smart Label for Inventory & Supply Chain Management

RFID Tag  from SAG

The Dual Frequency Smart Label from Securitag Assembly Group is compatible with both NFC and RAIN RFID (UHF) technologies. It operates at a frequency of 13.56 / 860 to 960 MHz and has a read range of up to 7 m. Powered by the em|echo-V chip (EM4425), this smart label provides an application crossover and opens the possibility to apply just one label to fit all use cases in both NFC and RAIN RFID domains.
Download Datasheet | Product Details
Sponsored by MilliBox
MilliBox
MilliBox Announces mmWave & THz Antenna Positioners
MilliBox announces a family of mmWave antenna positioners for OTA testing. They feature full spherical coverage and <0.1° resolution. Controllers, drivers, and motors are all built-in such that a USB cable and power is all you need. Python-based software is provided in source for ease of integration. Click here to learn more.
 
Antenna
Miniature Chip Antenna for Wi-Fi & Bluetooth Applications

Antenna  from ignion

The NANO mXTEND™ from Ignion is a Miniature Wi-Fi and Bluetooth Antenna that is optimized for operation from 2400 to 2500 MHz but can operate up to 8 GHz. It is the smallest off-the-shelf antenna for Wi-Fi with customizable performance. This linearly polarized antenna provides a peak gain of 2.4 dBi with an efficiency of more than 70%.
Download Datasheet | Product Details
EMF Meter / Antenna
Laser-Powered Electric Field Probe Kit from 5 kHz to 200 MHz

EMF Meter / Antenna  from AR RF/Microwave Instrumentation

The FL8200 from AR RF/Microwave Instrumentation is an advanced Laser-Powered Electric Field Probe and Associated Kit that operates from 5 kHz to 200 MHz. It has been designed specifically for EMC radiated immunity test applications. Each field probe is an electrically small, separable axis sensor capable of measuring both continuous wave and pulsed electric fields.
Download Datasheet | Product Details
RF Transistor
Doherty GaN Power Transistor from 100 to 2690 MHz

RF Transistor  from NXP Semiconductors

The A3G26D055N from NXP Semiconductors is a Doherty RF Power GaN Transistor that operates from 100 to 2690 MHz. It delivers an output power of 8 W with a gain of up to 18 dB and has an efficiency of 54.1%. The transistor has a high terminal impedance and is able to withstand extremely high output VSWR for optimal broadband performance.
Download Datasheet | Product Details
RF Amplifier
20 W GaN MMIC Power Amplifier from 9 to 10 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA901A020S from Wolfspeed is a GaN MMIC Power Amplifier that operates from 9 to 10 GHz. It has been developed for pulsed radar applications and delivers a saturated output power of more than 20 W with a gain of over 30 dB. The amplifier uses Cree's high-performance 0.15um GaN-on-SiC production process and has a power-added efficiency (PAE) of up to 53% with support for lower system DC power requirements.
Download Datasheet | Product Details
RF Transistor
1600 W Rugged LDMOS Power Transistor from 1 to 450 MHz

RF Transistor  from Ampleon

The ART1K6PHG from Ampleon is an LDMOS Power Transistor that operates from 1 to 450 MHz. It provides a P1dB of 1600 W with a gain of 27.4 dB and a drain efficiency of 74.7%. The transistor uses Ampleon’s Advanced Rugged Technology (ART) and has been designed to have a wide supply voltage range from 30 V to 55 V.
Download Datasheet | Product Details
Directional Coupler
10 dB Directional Coupler from 0.5 to 7.1 GHz

Directional Coupler  from UMCC

The DC-3800-10S from Universal Microwave Components is a Directional Coupler that operates from 0.5 to 7.1 GHz. It provides 10 dB of coupling with directivity of more than 20 dB and an insertion loss of less than 1.2 dB. The coupler can handle an average input power of 10 W, a peak power of 1 kW, and has a VSWR of less than 1.25:1.
Download Datasheet | Product Details
Sponsored by MilliBox
 
 
 
Microwave Backhaul Radio Links
10/20 Gbps Multi-Band 5G Backhaul Radio Platform

Microwave Backhaul Radio Links  from Aviat Networks

The WTM 4800 from Aviat Networks is a single multi-band radio platform that operates in both the 15-23 GHz band and the 71-86 GHz band. This 5G backhaul solution supports frequencies from 71-76, 81-86 GHz (E-Band), and 15, 18, 23 GHz (in the lower band). This radio platform significantly lowers the total cost of ownership (TCO) compared to alternative Multi-Band solutions that rely on two, three, and even four separate boxes.
Download Datasheet | Product Details
Microwave Backhaul Radio Links
5 GHz Dual-Carrier, Point-to-MultiPoint Beamforming Base Station

Microwave Backhaul Radio Links  from Radwin

The RADWIN NEO DUO from Radwin is a low-cost Dual-Carrier, Point-to-MultiPoint Beamforming Base Station that operates in the 5 GHz band. It has an integrated bi-directional (uplink and downlink) beamforming antenna that enables frequency reuse. It has a configurable channel bandwidth of 10, 20, 40, and 80 MHz, and supports OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) modulation schemes.
Download Datasheet | Product Details
Cellular IoT Module
LTE CAT M1 Cellular IoT Module with Worldwide Roaming

Cellular IoT Module  from Renesas

The RYZ014A from Renesas is an LTE Cat M1 Cellular IoT Module with worldwide deployment and roaming capability. It includes an LTE-optimized transceiver, a complete RF front-end to support LTE Cat-M1 bands worldwide, and key interfaces. The module has been developed according to 3GPP E-UTRA (Long Term Evolution - LTE, Release 13) Cat-M1 UE specifications.
Download Datasheet | Product Details
GNSS Module
Multi-Constellation GNSS Receiver with Sub-Decimeter Accuracy

GNSS Module  from Septentrio

The mosaic-Sx from Septentrio is a Multi-Band, Multi-Constellation GNSS Receiver that supports all current GNSS constellations. It provides always-on high-accuracy positioning with all-in-view satellite tracking and unmatched anti-jamming technology. It requires a DC supply of 3.3 V and consumes up to 1 W of power.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 0.03 to 40 GHz

RF Amplifier  from Planar Monolithics Industries

The PE2-12-30M40G-5R5-18-12-292FF from Planar Monolithics Industries is a Low Noise Amplifier that operates from 0.03 to 40 GHz. It provides a gain of 12 dB with a noise figure of 5.5 dB and has an output P1dB of over 16 dBm. This LNA requires a DC supply of 12-15 V and consumes 230 mA of current. It is available in a carrier-mounted module that measures 1.08 x 0.71 x 0.29 inches with 2.92 mm female connectors.
Download Datasheet | Product Details
Horn Antenna
Double-Ridged Horn Antenna from 1 to 8 GHz for EMC Pre-Compliance Testing

Horn Antenna  from Tekbox Digital Solutions

The TBMA4 from Tekbox Digital Solutions is a Double-Ridged Horn Antenna that operates from 1 to 8 GHz. It provides an isotropic gain of more than 6 dBi and has a front-to-back ratio of 20 dB. The antenna has a VSWR of less than 3:1 and an antenna factor from 23 to 43 dB/m. It can handle a continuous input power of up to 100 W.
Download Datasheet | Product Details
Block Up Converter
50 W Rugged Ka-Band Block Upconverter from 28 to 31 GHz

Block Up Converter  from Wavestream Corporation

The WBAK-050G01-0004 from Wavestream is a Ka-Band Deck Block Upconverter that up-converts an input frequency from 950 – 1950/1000 – 2000 MHz to an output frequency from 28 – 31 GHz. The BUC consists of a linear power amplifier that provides a saturated output power of 47 dBm (50 W) with a small signal gain of 62.5 dB. It has a noise power density of -76 dBm/Hz (Tx) and -156 dBm/Hz (Rx).
Download Datasheet | Product Details
Diplexer
200 W Diplexer for DCS and IMT Band DAS Applications

Diplexer  from Microlab

The BK-251E from Microlab is a Diplexer which allows combination and separation of the signals from 1710 - 1880 MHz (Port 1) and 1920 - 2200 MHz (Port 2). It combines DCS and IMT bands for Distributed Antenna System (DAS) applications. It can handle up to 200 W of input power at each port, has an insertion loss of less than 0.35 dB in the passband with over 50 dB of isolation.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]