1. everything RF
  2. RF Newsletters
more
PREV 27 October, 2014 NEXT

News, White Paper & Featured Products

October 27, 2014 - everything RF Newsletter
 
everything RF
Date: October 27, 2014
 
Find & Compare Waveguide Products
 
 
 
Industry News
Skyworks Ramps Production of Diversity Receive Modules for LTE Smartphones - Skyworks
Anritsu Mobile Interference Hunting System Simplifies Locating Interference - Anritsu
Rohde & Schwarz Showcased a Test Setup for mm-wave Applications at the 5G Global Summit in South Korea - Rohde & Schwarz
Fairview Microwave Introduces a line of RF Amplifiers for Commercial and Military Applications - Fairview Microwave
GLOBAL FOUNDRIES to Acquire IBM's Microelectronics Business for $1.5 Billion - GLOBAL FOUNDRIES
More News
White Papers
Radar, EW & ELINT Testing: Identifying Common Test Challenges - Keysight Technologies
Cost-efficient and Extensible RF Spectrum Monitoring & Management - Signal Hound
Analyzing RF Coexistence in a Mobile Handset - Computer Simulation Technology
Gallium Nitride RF Technology Advances and Applications - Freescale
Modeling RF Attenuation in a Mine Due to Tunnel Diameter and Shape - Remcom
More White Papers
Upcoming Event
Event Image
Electronica 2014

Date: 11 to 14 November 2014

Location: Messe, München, Germany

 
More Upcoming events
Featured Products
GPS/GNSS Antenna
Compact High Linearity Active Antenna for GPS/GNSS Applications

GPS/GNSS Antenna from Parsec Technologies, Inc.

The PTA1.5M-9 is one of the most compact high linearity active antenna for GPS/GNSS applications from 1560 to 1610 MHz. It measures 9 x 9.175 x 1.3 mm (L x W x H) and is ideal for enhancing location based service (LBS) receivers to improve immunity to unintentional interference and receiver de-sensing caused by close proximity radio transmissions. It is compatible with any GNSS receiver operating from 1560 to 1610 MHz.
 
Download Datasheet | Product Details
 
RF Amplifier
40 dB Detector Log Video Amplifier from 50 Mhz to 18.5 GHz

RF Amplifier from Planar Monolithics Industries

The DLVA-50M18D5G-40-LIN-LOG-CD-1 from PMI is a 40 dB detector log video amplifier that operates from 50 MHz to 750 MHz (LO) and 0.75 GHz to 18.5 GHz (HI). This model offers a logging range from -40 to 0 dBm, rise time of 100 ns for LO band; 25 ns for HI band and draws 200 mA of current. It requires a supply of 15 Vdc and is available in small package with connectors.
 
Download Datasheet | Product Details
 
Low Pass Filter
Miniature 400 MHz Lowpass LC Filter for Portable Radio Applications

Low Pass Filter from Networks International Corporation

The 400 MHz Lowpass Filter from NIC is a LC Low pass filter that operates from DC to 400 MHz. The filter has an insertion loss of 1.5 dB, an attenuation of 40 dB at 450 to 800 MHz and a VSWR of 12 dB in the pass band. It is matched to 50 Ohms and is available in PC mount non-hermetic package that measures 0.75 x 0.5 x 0.177 inches.
 
Download Datasheet | Product Details
 
Drop-In Circulator
869 to 894 MHz, Single Junction, Low Cost Drop-In Circulator

Drop-In Circulator from VidaRF

The VDC-086089-2 from VidaRF is a single junction low cost drop-in circulator which operates from 869 to 894 MHz. It has an isolation of 23 dB, an insertion loss of 0.25 dB, a VSWR of 1.15:1, a forward and reverse power of 250 W. The circulator and isolator is ideal for various wireless and power amplifier applications. The robust design provides high performance and reliability.
 
Download Datasheet | Product Details
 
Power Divider
Low PIM 3 Way Power Divider from 698 MHz to 2.7 GHz

Power Divider from MECA

The LPR3N-1.900-M01WWP is a 3 way low PIM power divider from MECA. It operates at a frequency from 0.698 to 2.7 GHz and can handle up to 700 W of average power with an insertion loss of under 0.4 dB. The power divider has a PIM of less than -153 dBc and a VSWR of under 1.45:1. It has N Type female brass albaloy plated connectors and can operate from -55° C to +85° C.
 
Download Datasheet | Product Details
 
Surface Mount Termination
DC to 4 GHz Surface Mount Termination from 10 to 150 Watts

Surface Mount Termination from Aeroflex - Inmet

The Series KAC are Surface Mount Terminations that operate from DC to 4 GHz. They are available in a number of frequency and power configurations from 10 W to 150 W. These terminations can be directly mounted on to PC boards eliminating the need for expensive mounting flanges and input tabs. They are manufactured using the environmentally friendly AlN substrate and are RoHS compliant.
 
Download Datasheet | Product Details
 
RF Amplifier
30 to 520 MHz, 10 W GaN Hybrid Amplifier for TETRA (Terrestrial Trunked Radio) applications

RF Amplifier from RFHIC

The TG520-10 from RFHIC is a GaN, hybrid, power amplifier which operates from 30 to 520 MHz. It provides up to 39 dBm of power (P1dB), a gain of 16 dB requires a 28 V supply. The amplifier module is designed for TETRA (Terrestrial Trunked Radio) applications. It is housed in a surface mount package which measures 15 x 10 x 5.4 mm.
 
Download Datasheet | Product Details
 
Power Divider
20W, 2 Way Power Divider from 7 to 12.4 GHz with SMA Connectors

Power Divider from VidaRF

The VPD-70124A2 is a 2 way power divider that operates from 7 to 12.4 GHz. It has an insertion loss of 0.5 dB, an isolation of 20 dB and can handle up to 20 W of power. The power divider has SMA female connectors that are matched to 50 ohms with a VSWR of less than 1.4:1.
 
Download Datasheet | Product Details
 
Fixed Attenuator
0 to 10 dB, 12, 15 and 20 dB, 0.75, 1, 2 and 5 W Fixed Attenuator from DC to 8 GHz

Fixed Attenuator from Aeroflex - Inmet

The PCAAF Series of fixed chip attenuator operate from DC to 8 GHz. These attenuators are available in a number of attenuation configurations from 0 to 20 dB. They consist of a laser trimmed distributed thin film element on an alumina ceramic substrate with a protective paint layer and solderable leads. The Attenuator has a proprietary thin film resistive element, alumina substrate and electroplated silver over nickel leads.
 
Download Datasheet | Product Details
 
Directional Coupler
500W, Low PIM Directional Coupler from 0.8 to 2.5 GHz

Directional Coupler from MECA

The LP715-20-1.650W is a low PIM directional coupler that operates from 0.8 to 2.5 GHz with 30 dB coupling (6, 10, 20 and 40 dB options are also available). The coupler has a coupling variation of 2.2 dB, insertion loss of 0.1 dB and a directivity of 25 dB. It can handle up to 500 W of average power and 10 KW peak power. The coupler is available with N Type connectors.
 
Download Datasheet | Product Details
 
Band Stop Filter
DC-1600 MHz Absorptive Lowpass Filter(Specialized LC + Crystal Filters)

Band Stop Filter from Networks International Corporation

The DC-1600 MHz Absorptive Lowpass Filter from Networks International Corporation is a Band Stop Filter with Stopband Frequency DC to 1.6 GHz, Insertion Loss 0.4 dB, Rejection 60 dB(3.1 to 5 GHz), VSWR 1.40:1, Operating_Temperature -40 to +85 Degrees C. Tags: Surface Mount. More details for DC-1600 MHz Absorptive Lowpass Filter can be seen below.
 
Download Datasheet | Product Details
 
Modulator
0.5 to 2 GHz, High Performance I/Q Vector Modulator with 2 x 12 Bit Monotonic TTL Channel

Modulator from Planar Monolithics Industries

The PIQ-0R5G2G-360-20-CD-1 from PMI is an I/Q Vector Modulator that operates from 0.5 to 2 GHz. It has a dynamic range of 20 dB & 360 degrees with an insertion loss of 11 dB. The I/Q Modulator has 2 x 12 bit monotonic TTL compatible channels (I and Q) and is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
Coaxial Termination
5 Watt SMA – Male Termination Operates up to 18 GHz

Coaxial Termination from HASCO Components

The HT18M-5 from HASCO Components is a 5W coaxial termination that operates from DC to 18 GHz. The termination has a SMA Male connector and is matched to 50 Ohms with a VSWR that varies from 1.15:1 to 1.25:1 across the frequency band.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Phase Stable Cable Assembly for T&M Applications up to 26.5 GHz

RF Cable Assembly from HASCO Components

The HVNA26 Series from HASCO Components is a phase stable test cable for vector network analyzers that operate up to 26.5 GHz. The cable has a 29.4 pF/Ft capacitance, 70% velocity propagation, a time delay of 1.40 ns/ft with an insertion loss of 0.79 dB per ft. The assembly is available with multiple connector options.
 
Download Datasheet | Product Details
 
New Waveguide Section
Waveguides
Find & Compare Waveguide Products
Find & Compare Waveguide Components using the parametric search tools on everything RF. There are over 6000 Products listed from more than 20 Manufacturers in 10 Categories. Download datasheets, get quotations and discovery new products based on your requirement.
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.