1. everything RF
  2. RF Newsletters
more
PREV 29 October, 2014 NEXT

New RF & Microwave Products this Week

October 29, 2014 - everything RF Newsletter
 
everything RF
Date: October 29, 2014
 
Android App by everything RF
 
 
 
New RF & Microwave Products this Week
Diplexer
1 to 1050 MHz / 1650 to 2500 MHz LTCC Diplexer

Diplexer from Mini Circuits

The LDP-1050-252+ from Mini-Circuits is a LTCC Diplexer with its lower pass band from 1 to 1050 MHz and its upper pass band from 1650 MHz to 2500 MHz. It has an insertion loss of less than 2 dB with rejection typically exceeding 31 dB. It can handle up to 2 W of power and is housed in tiny, 1206 LTCC package. This diplexer is ideal for use in satellite systems, cellular systems and GPS.
 
Download Datasheet | Product Details
 
Laminate
Low Loss Laminate Series from 30 to 40 GHz

Laminate from Rogers Corporation

The RO3035 are ceramic-filled PTFE composites intended for use in commercial microwave and RF applications. These laminates have a low dielectric loss from 30 to 40 GHz and are ideal for multilayer board designs with a range of dielectric constants and applications sensitive to temperature change.
 
Download Datasheet | Product Details
 
Directional Coupler
12.4 to 18 GHz Directional Coupler with 30 dB Coupling

Directional Coupler from KRYTAR

The 181230 from KRYTAR is a directional coupler that operates from 12.4 to 18 GHz. It has a coupling of 30±1.00 dB with an insertion loss of 0.6 dB and directivity of 15 dB. The coupler can handle up to 20 W of power, has a VSWR of 1.35:1. It has SMA-Female port connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
High Power Ka-Band Amplifier from 29 to 31 GHz

RF Amplifier from Analog Devices

The HMC7054 is a high power Ka-band amplifier that operates from 29 to 31 GHz. It achieves a linear output power of 37 dBm, a 42 dB small signal gain and requires a 5 V supply (draws 14 A of current). It has a 2.9-mm input connector and WR28 waveguide output. This HPA has been developed for SATCOM applications however can also be used for commercial and military applications.
 
Download Datasheet | Product Details
 
RF Amplifier
Wide Band Amplifier Series from 10 MHz to 30 GHz

RF Amplifier from AtlanTecRF

These ultra wide band amplifiers from AltanTecRF operate from 10 MHz to 30 GHz. These amplifiers have a gain up to 32 dB with a noise figure of less than 4 dB and P1dB up to 23 dBm. The amplifiers require a 12 V supply voltage. They are available in a module with SMA Female or 2.92 mm connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
820 to 890 MHz Power Amplifier for Wireless Infrastructure

RF Amplifier from Wavelex

The WPA08-35B from Wavelex is a power amplifier that operates from 820 to 890 MHz. It is provides a gain of 34.5 dB and P1dB of 43 dBm. The amplifier requires a 32 V supply while drawing 2.5 A of current. It is matched to 50 ohms, has a VSWR of 1.2:1 and is available in a RoHS compliant package with SMA Female connectors.
 
Download Datasheet | Product Details
 
Power Divider
4 to 8 GHz 2 Way Power Divider

Power Divider from Werbel Microwave

The 2PA600 from Werbel Microwave is a 2 way power divider that operates from 4 to 8 GHz. It has an insertion loss of 0.4 dB, an isolation of 20 dB and can handle up to 10 W of power. The power divider has SMA female connectors with a VSWR of less than 1.4:1.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
11.6 GHz Fixed Frequency Synthesizer for GPS Clock Systems and L Band Applications

Frequency Synthesizer from Z-COMM

The SFS11600H-LF is an 11.6 GHz fixed frequency synthesizer with a 10 MHz reference for GPS clock systems and L Band applications. The synthesized signal has a power level of up to 3 dBm, harmonics of -30 dBc and spurious of -65 dBc. The synthesizer requires a supply of 5 V, PLL voltage of 3.3 V and is available in a surface mount package.
 
Download Datasheet | Product Details
 
RF Switch
SP3T Reflective Switch from 0.03 MHz to 3 GHz

RF Switch from MACOM

The MASW-011030 from MACOM is a SP3T reflective switch that operates from 0.03 MHz to 3 GHz. The switch has an insertion loss of 0.35 dB, an isolation of 40 dB and can handle up to 100 W of power. The switch is ideal for use in land mobile radios and MIL-COM applications. It is available in a 7 mm HQFN 16-lead plastic package.
 
Download Datasheet | Product Details
 
Modulator
0.5 to 2 GHz I/Q Vector Modulator with 2 x 12 bit Monotonic TTL Compatible Channels

Modulator from Planar Monolithics Industries

The PIQ-0R5G2G-360-20-CD-1 from PMI is an I/Q Vector Modulator that operates from 0.5 to 2 GHz. It has a dynamic range of 20 dB & 360 degrees with an insertion loss of 11 dB. The I/Q Modulator has 2 x 12 bit monotonic TTL compatible channels (I and Q) and is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
OCXO
8 to 15 MHz OCXO with Low g-Sensitivity

OCXO from Vectron International

The OX-043 from Vectron International is an Oven Controlled Crystal Oscillator (OCXO) that operates from 8 to 15 MHz with ultra low g-sensitivity. This OCXO has a low phase noise, high stability and generates a sine wave output waveform. It requires a supply of 12 to 15 Vdc and is available in surface mount package which measures 50 x 50 mm.
 
Download Datasheet | Product Details
 
OCXO
8 to 40 MHz OCXO in Compact Hermetical Metal Package

OCXO from BOWEI Integrated Circuits

The OX12/OX14 Series from Bowei are Oven Controlled Crystal Oscillators (OCXO) that operate from 8 to 40 MHz with low power consumption. The series have harmonics of less than -20 dB and a rise/fall fall time of less than 6 ns. They provide both Sinewave and HCMOS output waveforms. The OCXOs are available in a compact hermetical metal package.
 
Download Datasheet | Product Details
 
RF Connector
1.0 mm Connector Series from DC to 110 GHz

RF Connector from Southwest Microwave

The 1.0mm Connector Series from Southwest Microwave operates from DC to 110 GHz. This series includes field-replaceable two and four-hole flange mount and thread-in connectors, direct solder cable connectors, and clamp-on end launch connectors, including low profile and reduced-size low-profile versions. They connectors have a well-matched impedance, good repeatability, a low VSWR of 1.2:1, insertion loss (0.6 dB) and RF leakage (= -100 dB).
 
Download Datasheet | Product Details
 
Front End Module
Receive Front End Module for LTE - B20, B3 & B7 Bands

Front End Module from Skyworks

The SKY13529-11 is an RX front end module (FEM) combining two SP4T switches (input and output switch) with three paths that include B20 (791 to 821 MHz), B3 (1805 to 1880 MHz), and B7 (2620 to 2690 MHz) SAW filters in series with high gain LNAs. The four separate paths are GPIO selectable with two control lines. It has low insertion loss, high isolation between paths when RX filtering and gain stages are selected.
 
Download Datasheet | Product Details
 
Front End Module
Receive Front End Module for LTE - B4, B7 & B17 Bands

Front End Module from Skyworks

The SKY13568-11 is an is an RX front-end module (FEM) combining two SP4T switches (input and output switch) with three paths that include B4 (2110 to 2155 MHz), B7 (2620 to 2690 MHz), and B17 (734 to 746 MHz) SAW filters in series with high gain LNAs. The four separate paths are GPIO selectable with two control lines. It has low insertion loss, high isolation between paths when RX filtering and gain stages are selected.
 
Download Datasheet | Product Details
 
Up Converter
Ka-Band Block Up-converter with 29 to 31 GHz Output Frequency

Up Converter from Analog Devices

The HMC7053 is a Ka-band block upconvertor with an output frequency of 29 to 31 GHz. It requires an input IF frequency of 1 to 2 Ghz. The up-converter provides a linear output power of -30 to 5 dBm with a 20 dB conversion gain. It has been designed with a dual upconversion scheme to ensure no phase inversion and maximum spurious rejection. Other features include dual L-band inputs, an SMA input and a 2.9-mm output connector, digital gain control and thermal monitoring and gain compensation.
 
Download Datasheet | Product Details
 
Android App by everything RF
RF Calculator
RF Calculator - Android App by everything RF
The RF Calculator is an Android App from everything RF that includes a suite of useful RF calculators. These include - Attenuator Calculators, Unit Conversions, Link Budget Calculator, Skin depth Calculation, VSWR Calculator and many others. Download it now!
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.