PREV 4 Aug, 2021 NEXT

New RF and Microwave Products this Week

4 Aug, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 4 Aug, 2021
 
Sponsored by AdauraTech
 
 
 
New RF and Microwave Products this Week
Radar Sensor
Low-Power Automotive FMCW Radar Transceiver from 76 to 81 GHz

Radar Sensor  from NXP Semiconductors

The TEF82xx from NXP Semiconductors is a single-chip, low-power Automotive FMCW Radar Transceiver that operates from 76 to 81 GHz. It enables 360-degree sensing for key safety applications including automated, emergency braking, adaptive cruise control, blind-spot monitoring, cross-traffic alert, and automated parking.
Download Datasheet | Product Details
GNSS Anti-Jamming Solution
Anti-Jam GNSS CRPA System for Mission Critical Applications

GNSS Anti-Jamming Solution  from TUALCOM

This product from TUALCOM is an Anti-Jam GNSS CRPA System that provides jam free GNSS signals for mission-critical applications. It has an embedded GNSS receiver that supports BeiDou (B1C), Galileo (E1, E5a), SBAS, GLONASS (L1) and GPS (L1) bands. This anti-jam system supports a 4-array CRPA antenna that uses novel beamforming techniques to assure normal operation of GNSS receivers in presence of up to 3 jamming sources simultaneously.
Download Datasheet | Product Details
Iso-Adapter
Space Qualified Iso-Adapter from 17.8 to 20.2 GHz

Iso-Adapter  from Smiths Interconnect

The 19HD353 from Smiths Interconnect is an Iso-Adapter that operates from 17.8 to 20.2 GHz. This SMA Right Angle to WG 19 / WR 51 adapter provides an insertion loss of less than 0.3 dB and isolation of over 23 dB. The centre contact of the SMA connector is shorted to ground to provide a 0-ohm DC bleed path. The adapter can handle up to 2 W of CW power and has been space qualified in house by Smiths Interconnect.
Download Datasheet | Product Details
RF Amplifier
Broadband Power Amplifier from 50 to 70 GHz

RF Amplifier  from AT Microwave

The AT-PA-5070-3020VC from AT Microwave is a Power Amplifier that operates from 50 to 70 GHz. It delivers a saturated output power of 20 dBm with a gain of 30 dB and has a noise figure of less than 6 dB. The amplifier has high gain, high linearity, low input/output return loss, and a flat gain response. It requires a DC supply voltage of 5 V and consumes less than 500 mA of current.
Download Datasheet | Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzer from 9 kHz to 27 GHz with GPS Capabilities

RF Spectrum Analyzer  from ThinkRF

The R5750 from thinkRF is a Real-Time Spectrum Analyzer with GPS is built for mobile wireless situational awareness applications such as RF drive testing, coverage mapping, propagation analysis, direction finding & transmitter localization and vehicle based spectrum monitoring. With built in GPS capabilities, this Real-Time Spectrum Analyzer enables engineers in the field to conduct in-depth analysis of complex waveforms while knowing the location and time of each measurement.
Download Datasheet | Product Details
Multiplexer
7 Band Multiplexer for GSM, CDMA, 4G LTE, LTE 2.6, and 5G Applications

Multiplexer  from SRTechnology Corporate

The R03-M2252-01 from SRTechnology is a Seven-Band Filter Module with passbands from 703 – 803 MHz, 790 – 862 MHz, 880 – 960 MHz, 1710 - 1880 MHz, 1920 – 2170 MHz, 2500 – 2690 MHz, and 3300 – 3800 MHz. It can handle up to 20 W of input power per port, has an insertion loss of less than 0.8 dB, and provides a port-to-port rejection over 50 dB in the 820 – 3800 MHz band.
Download Datasheet | Product Details
Frequency Synthesizer
Fixed-Frequency Synthesizers from 200 to 4500 MHz

Frequency Synthesizer  from EM Research

The CLX Series from EM Research are Fixed-Frequency Synthesizers that are available in frequency configurations from 200 to 4500 MHz. They deliver an output power of up to 20 dBm with a phase noise of under -110 dBc/Hz @ 10 KHz offset (output frequency = 200 MHz). The synthesizers have spurious levels of under -60 dBc and harmonics of less than -25 dBc. The required frequency configuration can be specified when ordering this product.
Download Datasheet | Product Details
Sponsored by AdauraTech
AdauraTech
AdauraTech's Industry Proven Line of RF Handover Test Systems
AdauraTech's cost-effective handover test systems give engineers the flexibility they need to carry out dynamic, comprehensive wireless mesh testing—including for modern Wi-Fi6E, MIMO, LTE, and 5G. 500 MHz to 6000 MHz with up to 95dB of attenuation, step sizes of 0.25 dB. and up to 512 attenuator channels. Click here to learn more
 
Wireless SoC
5G, Wi-Fi 6/6E and Bluetooth 5.2 SoC for IoT Applications

Wireless SoC  from Qualcomm

The QCS6490 from Qualcomm is a Wi-Fi 6/6E and Bluetooth 5.2 SoC that is designed for Enterprise and IoT applications with support for 5G and Wi-Fi 6E. It supports bi-directional Multi-User MIMO and delivers a data rate of up to 3.6 Gbps. The SoC has an integrated Kryo 670 CPU built on Arm v8 Cortex technology and an 812 MHz Adreno 642L GPU.
Download Datasheet | Product Details
Down Converter
50 GHz Phase Noise Test Set

Down Converter  from Holzworth Instrumentation

The HA7063A from Holzworth is a Heterodyne Downconversion System that can accept an input RF signal from 10 MHz to 50 GHz. This system has been designed to seamlessly integrate with Holzworth's HA7062 series real-time phase noise analysis products as an ANSI z540 calibrated frequency extension. It downconverts the signal to DC to 40 MHz (with HA7062C) and DC to 100 MHz (with HA7062D).
Download Datasheet | Product Details
RF Cable
Flexible Microwave Assemblies that Can be Bent Right Behind the Connector

RF Cable  from Times Microwave Systems

The INSTABEND 086 from Times Microwave Systems are Coaxial Microwave Assemblies that operate from DC to 62 GHz. These cables can be bent right behind the connector thereby minimizing the required footprint, saving space, and simplifying cable routing. They can be used with SMA, SMP, and 2.92 mm connectors and are ideal for space flight, thermal vacuum, microwave test, commercial and military applications.
Download Datasheet | Product Details
RF Cable Assembly
½ Inch Low-PIM Coax Cable Assembly from 10 to 3000 MHz

RF Cable Assembly  from NAI Group

The STEADY LINK Series-C RF50 from NAI are ½ inch Coax Cable Assemblies that operate from 10 MHz to over 3000 MHz. These coax jumpers are designed for wireless applications on cell towers and microcells, to meet the surge in demand for additional radios and antennas required to service both 4G LTE and 5G networks. This 50-ohm cable assembly has a bend radius of 70 mm and can resist crushing of up to 2 kg/mm.
Download Datasheet | Product Details
RF Amplifier
GaN Hybrid Power Amplifier from 200 to 2000 MHz

RF Amplifier  from RFHIC

The TG2000-10 from RFHIC is a GaN Hybrid Power Amplifier that operates from 200 to 2000 MHz. It provides an output power of 6 W with a gain of up to 12 dB and has an average efficiency of 50%. The amplifier is designed using RFHIC’s GaN on SiC HEMT with a hybrid surface mount package and is attached to a copper sub-carrier. It is ideal for use in radio systems, trunked radio systems, RF sub-systems and base stations.
Download Datasheet | Product Details
RF Variable Attenuator
24 Attenuator Assembly from 200 to 6000 MHz

RF Variable Attenuator  from JFW Industries

The 50PA-1197 from JFW Industries is a Solid-state Programmable Attenuator Assembly that operates from 200 to 6000 MHz. It consists of 24 solid-state step attenuators, each with an attenuation range from 0-95 dB with 1 dB steps. The attenuators have an insertion loss of less than 8.8 dB and a typical switching speed of 4 microseconds.
Download Datasheet | Product Details
GPS/GNSS Antenna
Multiband GNSS Antenna for GPS/GLONASS/BeiDou Bands

GPS/GNSS Antenna  from Arralis

The M-GNSSB-ANT from Arralis is a Multiband GNSS Antenna that operates from 1560 to 1610 MHz covering the GPS L1, GLONASS G1 and BeiDou B1 bands. It provides a gain of up to 3 dB and has an axial ratio of less than 3 dB. This antenna covers multiple frequencies to improve DOP (Dilution of Precision) and provide the best possible accuracy by having a lock on multiple satellites
Download Datasheet | Product Details
Sponsored by AdauraTech
 
 
 
RF Amplifier
1200 W Solid-State Power Amplifier from 10 kHz to 225 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 1200A225A AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 10 kHz to 225 MHz. This self-contained, air-cooled amplifier, when used with an RF sweep generator, provides more than 1200 W of CW power with a gain of over 61.8 dB. It can reproduce AM, FM, or Pulse modulation appearing on input signal. The amplifier is protected from RF input overdrive by an input leveling circuit.
Download Datasheet | Product Details
Band Pass Filter
Surface-Mount Bandpass Filter with Passband from 3.25 to 4.25 GHz

Band Pass Filter  from Atlanta Micro

The AM3187 from Atlanta Micro is a Passive Bandpass Filter with a passband from 3.25 to 4.25 GHz and a center frequency at 3.75 GHz. It can handle an input power of 0.5 W, has an insertion loss of less than 4.4 dB in the passband and provides 30 dB of rejection in the stopband. The filter is useful as an IF filter in an RF system for image, LO, and spur rejection.
Download Datasheet | Product Details
RF Inductor
Ceramic Wirewound Chip Inductors from 2.7 to 470 nH

RF Inductor  from Coilcraft

The 0603DC Series from Coilcraft are Ceramic Wirewound Chip Inductors with inductance values from 2.7 to 470 nH. These inductors achieve the industry’s highest Q factors in a 0603 size for super low loss in high-frequency circuits. The Q factor can be as high as 177 at 2.4 GHz. They have an extremely high self-resonance of up to 11.4 GHz and DCR as low as 29 mOhm. These inductors are AEC-Q200 Grade 1 Certified and can operate at a temperature from –40 to +125 °C.
Download Datasheet | Product Details
Power Divider
2-Way Broadband Power Divider from 0.5 to 8 GHz

Power Divider  from MECA

The 802-2-4.250 from MECA is a 2-Way Broadband Splitter that operates from 0.5 to 8 GHz. It can handle an input power of up to 30 W and has a VSWR of less than 1.5:1. The power divider has an insertion loss of less than 1.6 dB and provides an isolation of 22 dB. It has an amplitude balance of 0.3 dB and a phase balance of less than 6°. The divider is available in a module with SMA Female connectors.
Download Datasheet | Product Details
Frequency Multiplier
2x GaAs MMIC Active Frequency Multiplier with 22 to 42 GHz Output

Frequency Multiplier  from Analog Devices

The HMC8342 from Analog Devices is a 2x GaAs MMIC Active Frequency Multiplier that converts an input frequency from 11-21 GHz to an output frequency from 22-42 GHz. It provides an output power of 15 dBm when driven by a 5 dBm signal and has a fundamental RF input isolation at RF output equal to -23 dBc at 30 GHz.
Download Datasheet | Product Details
Voltage Controlled Oscillator
4000 MHz Voltage Controlled Oscillator

Voltage Controlled Oscillator  from Crystek Corporation

The CVCO33CC-4000-4000 from Crystek Microwave is a Voltage Controlled Oscillator with a frequency of 4000 MHz and a tuning frequency of 6 MHz/V (0 to 3.3 V). The VCO delivers an output power of up to 3 dBm with a phase noise of -120 dBc/Hz at 1 MHz offset. It has peak-to-peak frequency pulling of up to 5 MHz, and pushing of up to 1 MHz/V.
Download Datasheet | Product Details
RF Surge Protector
Multistage RF Surge Protector for Avionics and Aerospace Applications

RF Surge Protector  from NexTek

The FPDNFNFHDP05-B from Nextek is a Multistage RF Surge Protector that operates from 1.1 to 1.7 GHz. This lightning protector can handle input voltage of up to 3200 V and input current of up to 2000 A. It meets DO-160G Section 22, indirect lightning, and MIL-STD environmental requirements. It is ideal for avionics, and aerospace applications.
Download Datasheet | Product Details
Antenna
Wall-Mount LTE/5G Antennas from 617 to 6000 MHz

Antenna  from Parsec Technologies, Inc.

The Labrador Pro Series from Parsec Technologies are MIMO Antennas that operate from 617 to 6000 MHz. These linearly polarized antennas provide a peak gain of up to 10 dBi with radiated efficiency from 50 to 80%. They can handle an input power of 5 W. The antennas are ideal for external M2M, IoT, wireless internet access for retail, failover to wireless internet, and backup applications.
Download Datasheet | Product Details
Antenna
IP67-Rated Low Profile Cellular Antennas from 617 to 7125 MHz

Antenna  from Laird Connectivity

The 5G Phantom Series from Laird Connectivity are low profile cellular antennas that operate from 617 – 7125 MHz / 698 - 7125 MHz. These vertically polarized antennas provide a peak gain of 5.5 dBi and have an efficiency of over 80% from 617 - 4200 MHz. They can handle an input power of up to 100 W and have a VSWR of less than 2.5:1. These omnidirectional antennas deliver global cellular coverage, even for regions where the lower 600 MHz band is used.
Download Datasheet | Product Details
Base Station Antenna
10-Port Penta-Beam Antenna from 1710 to 2690 MHz

Base Station Antenna  from Rosenberger

The 5WMB-51 from Rosenberger is a 10-Port Base Station Antenna that operates from 1710 to 2690 MHz. This multibeam antenna can generate up to five independent beams simultaneously from a single aperture and provides a gain of 20.6 dBi. It is available in a pole-mount enclosure with 4.3-10 connectors and has a length of less than 1.1 m. The antenna is suitable for outdoor applications.
Download Datasheet | Product Details
RF Cable Assembly
50-Ohm BNC Plug-Plug Cable Assemblies from DC to 3 GHz

RF Cable Assembly  from Amphenol RF

The LMR-UF UltraFlex Series from Amphenol RF are BNC Cable Assemblies that operate from DC to 3 GHz. They have a Plug-to-Plug configuration and are designed with improved shielding to achieve low attenuation loss at high frequencies and can withstand over 500 mating cycles. They are available in standard lengths ranging from 12 inches to 30 meters.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]