PREV 1 Sept, 2021 NEXT

New RF and Microwave Products this Week

1 Sept, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 1 Sept, 2021
 
Sponsored by Signal Hound
 
 
 
New RF and Microwave Products this Week
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 1 MHz to 6 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The R60 is a single port USB-powered VNA (Reflectometer) capable of measuring S11 from 1 MHz to 6.0 GHz. It can be operated from any Windows PC or laptop using a USB cable. Applications of the R60 include antenna matching, cable and connector quality control, antenna production quality assurance, field testing and troubleshooting of cables, material measurements, and many others.
Download Datasheet | Product Details
Front End Module
900 to 930 MHz Front End Module for ISM and IoT Applications

Front End Module  from Skyworks Solutions

The SKY65362-11 from Skyworks is an RF Front End Module (FEM) that operates from 900 to 930 MHz. This FEM consists of a Tx/Rx switch, power amplifier (Tx), and a low noise amplifier with a programmable bypass in the Rx path. In the Tx path, the power amplifier provides an output power of 30.5 dBm with a gain of 33 dB and has a PAE of 43%. In the Rx path, the LNA delivers a gain of 16 dB and has a noise figure of 2.5 dB.
Download Datasheet | Product Details
Band Pass Filter
5G Bandpass BAW Filter with Passband from 3.3 to 3.6 GHz

Band Pass Filter  from Akoustis

The A10335 from Akoustis is a Bandpass BAW RF Filter with a passband from 3300 to 3600 MHz. It can handle up to 32 dBm of power and has an insertion loss of less than 2.7 dB. This filter uses Akoustis’ patented XBAW technology to provide excellent RF filter performance and its high rejection enables coexistence with adjacent 4G LTE & 5G bands.
Download Datasheet | Product Details
GNSS Module
12-Channel L1/L2 Band GPS Receiver Module for Military Applications

GNSS Module  from BAE Systems

The Micro GPS Receiver Application Module (MicroGRAM) from BAE Systems delivers geolocation and precise positioning capabilities for military applications such as tactical communications, field computers, and unmanned aircrafts. The module is capable of 12-channel continuous satellite tracking and supports L1 and L2 dual-frequency GPS signal reception.
Download Datasheet | Product Details
Bias Tee
Broadband Bias Tee from 125 kHz to 67 GHz

Bias Tee  from HYPERLABS

The HL9647 from Hyperlabs is a Bias Tee that operates from 125 kHz to 67 GHz. It can handle a maximum DC bias current of 1000 mA and has a breakdown voltage of ±30 V. The bias tee has an insertion loss of less than 2.3 dB, an amplitude match of ±0.1 dB, and a phase match of ±4° at 40 GHz. It is available in a RoHS compliant package that measures 49.53 x 33.02 x 13.46 mm with 1.85 mm plug-plug, plug-jack, and jack-jack connectors.
Download Datasheet | Product Details
Rubidium Oscillator
10/60 MHz Space-Qualified Rubidium Atomic Frequency Source

Rubidium Oscillator  from Orolia

The iSpace+ miniRAFS from Orolia is a Rubidium Atomic Frequency Source with an operating frequency of 60 MHz (Main) and 10 MHz (Auxiliary). It provides an output signal level of 7 dBm and has a frequency accuracy of better than 2 x 10-10. The frequency source has a phase noise of -135 dBc/Hz (@100 kHz offset), spurious levels of better than -60 dB and harmonics of -30 dBc.
Download Datasheet | Product Details
Sponsored by Signal Hound
Signal Hound
Signal Hound: Your Reliable Partner in RF Test and Measurement Equipment
We're dedicated to providing RF professionals with powerful tools to get the job done. From EMC pre-compliance testing for small shops, to spectrum monitoring on a national scale, our test equipment is designed with you in mind. The price on our website is the price you pay, no hidden costs or upgrade charges. Click here to learn more.
 
EMF Meter / Antenna
Laser-Powered Electric Field Probe Kit from 5 kHz to 200 MHz

EMF Meter / Antenna  from AR RF/Microwave Instrumentation

The FL8200 from AR RF/Microwave Instrumentation is an advanced Laser-Powered Electric Field Probe and Associated Kit that operates from 5 kHz to 200 MHz. It has been designed specifically for EMC radiated immunity test applications. Each field probe is an electrically small, separable axis sensor capable of measuring both continuous wave and pulsed electric fields.
Download Datasheet | Product Details
RF Amplifier
37 dBm Power Amplifier from 2 to 18 GHz

RF Amplifier  from AmpliTech

The APTT-35-02001800-5025 from AmpliTech is a Power Amplifier that operates from 2 to 18 GHz. It provides a gain of 37 dB, has a P1dB of 25.5 dBm, and a noise figure of less than 5 dB. The amplifier uses state-of-the-art PHEMT technology and is available in a rack mount unit that measures 6.29 × 6.49 inches. It is specifically designed for use in power stress tests, reliability testing, and laboratory instrument testing.
Download Datasheet | Product Details
Integrated Microwave Assembly
Integrated Microwave Assembly with Switches and Amplifiers from 2 to 18 GHz

Integrated Microwave Assembly  from Planar Monolithics Industries

The PIMA-218-3S3A-32-NS3F-NSI from Planar Monolithics Industries is an Integrated Microwave Assembly (IMA) consisting of 3 Switches and 4 Amplifiers that operate from 2 to 18 GHz. The switches have a low insertion loss of less than 4 dB and a switching time of less than 1 µs. The amplifiers provide a gain of 32 dB and a low noise figure.
Download Datasheet | Product Details
Frequency Synthesizer
10 MHz to 6.7 GHz RF Synthesizer Module

Frequency Synthesizer  from Holzworth Instrumentation

The HSM6001B from Holzworth Instrumentation is an RF synthesizer module that operates from 10 MHz to 6.7 GHz. It is a microwave CW source that is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliments the phase coherent nature of this digital-analog hybrid signal source.
Download Datasheet | Product Details
Directional Coupler
10 dB Directional Coupler from 2.5 to 4.5 GHz

Directional Coupler  from Electro-Photonics LLC

The Q10HF-3500S-SMA from Electro-Photonics is a Directional Coupler that operates from 2.5 to 4.5 GHz. It provides 10 ± 1.5 dB of coupling and has an insertion loss of 0.3 dB. The coupler can handle up to 50 W of CW input power, provides 16 dB of isolation, and has a VSWR of 1.2:1. It is available in a module that measures 27.94 x 21.59 x 15.75 mm with SMA-female connectors.
Download Datasheet | Product Details
PLDRO
Low-Phase Noise Fractional-N PLDRO from 5 to 28 GHz

PLDRO  from Polaris

The Fractional-N PLDRO from Polaris is a Phase Locked Dielectric Resonator Oscillator (PLDRO) with an output frequency from 5 to 28 GHz. It has a frequency resolution of 1 kHz, can deliver more than 13 dBm of output power with a phase noise of -123 dBc/Hz at 100 kHz offset (6 GHz output frequency). The PLDRO has spurious levels of -75 dBc and harmonics of better than -20 dBc.
Download Datasheet | Product Details
Sponsored by Signal Hound
 
 
 
RF Amplifier
2.5 W MMIC Power Amplifier from 0.01 to 3.5 GHz

RF Amplifier  from Amcom Communications

The AM003536WM-QN5-R from Amcom Communications is an MMIC Power Amplifier that operates from 0.01 to 3.5 GHz. It delivers a saturated output power of more than 34 dBm (~2.5 W) with a gain of 22 dB. It is available in a QFN package that measures 5 x 5 mm with coplanar RF, ground, and DC connections at the bottom of the package. It is ideal for use in gain blocks, software radios, and instrumentation applications.
Download Datasheet | Product Details
RF Amplifier
60 W GaN MMIC Amplifier from 17.3 to 19.2 GHz

RF Amplifier  from Wolfspeed, A Cree Company

The CMPA1H1J050F from Wolfspeed is a GaN on SiC MMIC Amplifier that operates from 17.3 to 19.2 GHz. It delivers an output power of up to 60 W (~48 dBm) with a gain of 28 dB and has a power-added efficiency of more than 28%. This amplifier utilizes Wolfspeed’s high performance, 0.15um GaN on SiC production process. It requires a DC supply of 28 V and consumes 400 mA of current.
Download Datasheet | Product Details
RF Mixer
GaAs Passive Double-Balanced Mixer from 12 to 40 GHz

RF Mixer  from Marki Microwave

The MM1-1240S from Marki Microwave is a GaAs Passive Double-Balanced Mixer with an RF/LO frequency from 12 to 40 GHz and an IF frequency from DC to 12 GHz. It has a conversion loss of less than 14 dB and a P1dB of 14 dBm. This mixer has been optimized to provide exceptional isolation, spurious response and broadband performance.
Download Datasheet | Product Details
Fixed Attenuator
Fixed Cryogenic Attenuators from DC to 18 GHz

Fixed Attenuator  from API Technologies

The CCAAW Series from API Technologies is a Cryogenic Attenuators that operates from DC to 18 GHz. It is available in attenuation levels from 0 to 20 dB with an attenuation accuracy of better than ±1 dB. The attenuator can handle up to 4 W of power and has a VSWR of less than 1.5:1. It is available in a chip-scale package that measures 1.91 x 1.52 x 0.25 mm with Alumina substrate and gold wire bondable terminals.
Download Datasheet | Product Details
Wireless SoC
Bluetooth 5.0 (BR+BLE) SoC for IoT Applications

Wireless SoC  from Infineon Technologies

The CYW20735B1 from Infineon Technologies (Cypress) is a Bluetooth 5.0 SoC that is designed for IoT applications. It is based on a 96-MHz ARM® Cortex®-M4 microcontroller unit with a floating-point unit (FPU) and provides a data rate of up to 2 Mbps. This SoC has a programmable Tx power of up to 12 dBm and an Rx sensitivity of -94.5 dBm.
Download Datasheet | Product Details
RF Cable
40/50/70 GHz Precision and Rugged VNA Cables

RF Cable  from ConductRF

The VNA70 Series from ConductRF are VNA Cables that operate at 40, 50, and 70 GHz. They can handle up to 30 W of power and have an attenuation of less than 2.18 dB/ft. These cables have a VSWR of less than 1.45:1 and phase stability of ±10 deg. They have a non-conductive Nomex outer cover and a stainless-steel spiral conduit that results in armor-like crush resistance of 1050 lbs/inch, with a bend radius of 2 inches.
Download Datasheet | Product Details
GPS/GNSS Antenna
25 mm Active GNSS Patch Antenna for Navigation and Asset Tracking

GPS/GNSS Antenna  from Taoglas

The ASGGB254.A from Taoglas is a Single Band Active GNSS Patch antenna for GPS, GLONASS, BeiDou, Galileo and IRNSS bands. It consists of a two-stage LNA and a front-end SAW filter to reduce out of band noise. This RHCP polarized antenna provides a total gain of 30 dB (through the antenna, SAW filter and LNA) and has a noise figure of less than 2.7 dB.
Download Datasheet | Product Details
SATCOM Antenna
Electronically Steerable Ka-Band Omnidirectional Antenna for SATCOM

SATCOM Antenna  from Get SAT Ltd

The Sling Blade from Get SAT is an Electronically Steerable Antenna (ESA) that operates in the Ka-band with a Tx frequency range of 27.5-31 GHz and an Rx frequency range of 17.7-21.2 GHz. This antenna has an electronically configurable circular polarization and can deliver an EIRP of up to 46 dBW. It has an azimuthal beamwidth of 360° (omnidirectional) and an electronically steerable elevation beamwidth from 10 to 90°.
Download Datasheet | Product Details
Laminate
Halogen-free, Very Low Loss RF/Microwave Laminate

Laminate  from Isola Group

The TerraGreen from Isola Group is an RF/Microwave Laminate Material that meets the IPC-4103/17, UL 94 V-0, and E41625 standards. It has a dielectric constant of 3.45 that is stable between the temperature range from -55 to 125°Celsius, for up to W-band frequencies (110 GHz). The material has a dielectric loss of 0.0032 which was measured by the Bereskin Stripline test method. It is compatible with Isola’s FR-4 materials for hybrid designs.
Download Datasheet | Product Details
90 Degree Hybrid Coupler
90-Degree, 3 dB Hybrid Coupler from 2 to 40 GHz

90 Degree Hybrid Coupler  from Sigatek

The SQ29516 from SigaTek Microwave is a 90-Degree, 3 dB Hybrid Coupler that operates from 2 to 40 GHz. It can handle an average power of up to 10 W (CW) and peak power of up to 500 W. The coupler has an insertion loss of less than 2.7 dB and provides over 14 dB of isolation. It has an amplitude balance of ±1.5 dB and a phase balance of ±15 degrees.
Download Datasheet | Product Details
Base Station Antenna
8-Port Panel Antenna from 896-960 / 3300-3800 MHz

Base Station Antenna  from Alpha Wireless

The AW3874 from Alpha Wireless is a 4x4 MIMO Panel Antenna with four low-band ports from 896 to 960 MHz and four mid-band ports from 3300 to 3800 MHz. This ±45° slant linear polarized antenna has a gain of over 12 dB and has a VSWR of less than 1.5:1. It has a horizontal beamwidth up to 71° and an elevation beamwidth up to 23°.
Download Datasheet | Product Details
Base Station Antenna
16-Port Multibeam Antenna from 698-896 MHz and 1695-2400 MHz

Base Station Antenna  from CommScope

The 2NN2HH-33B-R4 from Commscope is a 16-Port Multibeam Antenna that operates from 698-896 MHz and 1695-2400 MHz. It provides 4T4R capability in low and mid bands and offers full-spectrum operation for 14, AWS, PCS, and WCS bands. The antenna has a horizontal beamwidth of up to 42°, a front-to-back ratio of more than 26 dB, and provides 25 dB of isolation.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new products, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]