PREV 10 Nov, 2021 NEXT

New RF and Microwave Products this Week

10 Nov, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 10 Nov, 2021
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
RF Amplifier
High Linearity Pre-Driver Amplifier from 2.3 to 5 GHz for 5G Massive MIMO

RF Amplifier  from NXP Semiconductors

The BTS6302U from NXP Semiconductors is a Pre-Driver Amplifier that operates from 2.3 to 5 GHz. It delivers a saturated output power of 27.9 dBm with a gain of over 35 dB and has a noise figure of less than 3.8 dB. This amplifier has fast on-off switching to support TDD systems and has an ACLR of -43 dBc for high-linearity performance. It requires a DC supply of 5 V and draws less than 120 mA of current.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Economical Vector Network Analyzers from 5 kHz to 20 GHz

Vector Network Analyzer  from Rohde & Schwarz

The R&S ZNL Series from Rohde & Schwarz are two-port Vector Network Analyzers that operate from 5 kHz to 20 GHz. They provide excellent performance with a dynamic range up to 130 dB and output power range from -40 dBm to +3 dBm. The standard features include embedding/de-embedding, fixture compensation, time-domain measurements, and support of automatic calibration units.
Download Datasheet | Product Details
OCXO
World’s smallest 24-hour holdover PPS Disciplined OCXO from 10 to 20 MHz

OCXO  from Rakon

The ROD2522S2 from Rakon is a PPS Disciplined OCXO that operates from 10 to 20 MHz. It has peak-to-peak frequency stability of 0.5 ppb over a temperature range from -40 to 85 °C. This OCXO uses Rakon’s proprietary smart compensation techniques and unique circuitry design to deliver a 24-hour holdover (1.5 µs). It is ideal for use in edge grand masters, DU/CU/servers, cell-site routers, front-haul switches, NIC timecards, test equipment, and GNSS modules.
Download Datasheet | Product Details
RF Transistor
6 W GaN Transistor from 2.5 to 5 GHz

RF Transistor  from Qorvo

The QPD0005M from Qorvo is a GaN on SiC Transistor that operates from 2.5 to 5 GHz. It delivers a saturated output power of 37.7 dBm (~6 W) with a gain of 18.6 dB and has a drain efficiency of 74.1%. The transistor requires a DC supply of 48 V and draws 20 mA of current. It is available in an RoHS compliant, plastic overmold DFN package that measures 4.5 x 4.0 mm.
Download Datasheet | Product Details
RF Amplifier
10 W GaN Solid-State Power Amplifier from 5.1 to 5.9 GHz

RF Amplifier  from NuWaves Engineering

The NuPower C10R01 from NuWaves Engineering is a GaN SSPA that operates from 5100 to 5900 MHz. It delivers saturated output power of 10 W with small signal gain of 54 dB and has a VSWR of 2:1. This GaN-based power amplifier provides near-constant envelope waveforms and has an 'improved' link margin. It is ideal for use in SWaP-constrained broadband RF telemetry, tactical communication systems, and electronic warfare systems.
Download Datasheet | Product Details
RF Cable Assembly
AMC Plug to RP-SMA Jack Cable Assemblies from DC to 6 GHz

RF Cable Assembly  from Amphenol RF

The AMC-RP Series from Amphenol RF are AMC Plug to RP-SMA Jack Cable Assemblies that operate from DC to 6 GHz. They have a right-angled plug AMC connector and a straight bulkhead jack RP-SMA connector. These cable assemblies are available in lengths ranging from 50-450 mm and use 1.13/1.32/1.37 mm Micro-cables. They are impedance matched to 50 Ohms.
Download Datasheet | Product Details
Sponsored by Mouser
Maxim Integrated
RF Receivers for Amplitude Shift-Keying (ASK) and Frequency Shift-Keying (FSK) data
Maxim Integrated MAX41473/MAX41474 RF Receivers are high-performance and low-power devices that receive ASK/FSK modulated data in the 287MHz to 320MHz, 425MHz to 480MHz, and 860MHz to 960MHz ISM frequency bands. These receivers are fully programmable through an I2C interface. Click here to learn more.
 
Software
Software Suite for Automated EMC Testing & Report Generation

Software  from AR RF/Microwave Instrumentation

The emcware 6.0 from AR RF/Microwave Instrumentation is a Software Suite for automated Electromagnetic Compatibility (EMC) testing and report generation. It has over 500 predefined test profiles and offers multi-tone testing capability. The software has a compartmental design with various test methods based on the EMC test standards and also allows users to create their own custom test standards.
Download Datasheet | Product Details
RF & Microwave Isolator
Drop-in Isolators from 10 MHz to 26.5 GHz

RF & Microwave Isolator  from UIY Inc.

The drop-in Isolators from UIY operate from 10 MHz to 26.5 GHz. They have an insertion loss of less than 1.5 dB, isolation of over 14 dB, and can handle up to 500 watts of forward power. These isolators are available in a module with TAB connectors and can also be ordered as a custom module. They are suitable for Military, Space & Commercial applications.
Download Datasheet | Product Details
OCXO
Miniature OCXO from 30 to 300 MHz

OCXO  from Dynamic Engineers

The OCXO3319AW from Dynamic Engineers is a Miniature OCXO with a frequency from 30 to 300 MHz. It provides HCMOS (TTL) or Sinewave outputs with an SSB phase noise of -158 dBc/Hz @ 100 kHz offset. The OCXO has frequency stability of better than ±10 ppb, a warmup time of 30 s, and aging of ±0.05 ppm per year. It requires a supply voltage of 5 V and consumes less than 1200 mW of power.
Download Datasheet | Product Details
RF Amplifier
700 W Solid-State Power Amplifier from 8 to 12 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP4022B-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 8 to 12 GHz. It delivers a saturated output power of 700 W and a P1dB of 300 W with a gain of more than 58 dB. This Class A/AB amplifier is equipped with in-built closed-circuit air-liquid cooling and built-in protection circuits with extensive monitoring.
Download Datasheet | Product Details
RF Amplifier
X-Band GaN Solid State Power Amplifier from 8.9 to 9 GHz

RF Amplifier  from Communications & Power Industries

The VSX3726 from Communications & Power Industries is a Solid-State Power Amplifier that operates from 8.9 to 9 GHz in the X-Band. It delivers a saturated output power of 2 kW, has a pulse width from 1 to 100 µs and a maximum duty cycle of 5%. The SSPA utilizes GaN transistors to provide high gain, high efficiency and excellent pulse fidelity providing excellent AM/PM, phase-noise and spectral re-growth.
Download Datasheet | Product Details
RF Shielded Test Enclosure
Large Lightweight RF Shield Box from 1 to 10 GHz

RF Shielded Test Enclosure  from Ranatec

The RI 189 from Ranatec is an RF Shielded Box that operates from 1 to 10 GHz. It provides 70 dB of shielding and can handle up to 2 kW of internal heat generation with a corresponding temperature rise of 20 degrees. This large, lightweight aluminum box has been designed for testing Mobile Base stations, point-to-point microwave links (P2P, PTP), or any other large test setup, wireless semiconductor test as well as WLAN/Bluetooth/Zigbee/WiMax device test applications.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-7370 from RF Electronics is a Standalone Portable RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This fully portable design is equipped with caster wheels for ease of movement. It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
RF Amplifier
15 kW S-Band Transmitter System from 2.7 to 3.1 GHz for Radar Applications

RF Amplifier  from RFHIC

The RRT273115K-690 from RFHIC is an S-Band Transmitter System that operates from 2700 to 3100 MHz. It delivers an output power of 15 kW, has a duty cycle of 10%, and a VSWR of 2:1. The transmitter is designed with a fault redundant structure allowing the transmitter to provide graceful degradation in case of an amplifier failure. It is available in a rack design that measures 1016.0 x 482.6 x 1866.9 mm.
Download Datasheet | Product Details
RF Variable Attenuator
Assembly with 24 Attenuators from 200 to 6000 MHz

RF Variable Attenuator  from JFW Industries

The 50PA-1197 from JFW Industries is a Solid-state Programmable Attenuator Assembly that operates from 200 to 6000 MHz. It consists of 24 solid-state step attenuators, each with an attenuation range from 0-95 dB with 1 dB steps. The attenuators have an insertion loss of less than 8.8 dB and a typical switching speed of 4 microseconds.
Download Datasheet | Product Details
Waveguide Attenuator
Fixed Waveguide Attenuators from 26.5 to 110 GHz

Waveguide Attenuator  from Fairview Microwave

The FMWA Series from Fairview Microwave are Fixed Waveguide Attenuators that operate from 26.5 to 110 GHz. They are available with attenuation levels of 3, 6, 10, 20 and 30 dB. The attenuators can handle input power up to 5 W and have a VSWR of less than 1.15:1. They offer excellent RF performance to meet a diverse set of application requirements. The attenuators are available in modules with various waveguide sizes from WR-10 to WR-28 with UG style cover flanges.
Download Datasheet | Product Details
RF Amplifier
28 W Power Amplifier from 30 to 31 GHz for Military and Space Applications

RF Amplifier  from ERZIA

The ERZ-HPA-3000-3100-46 from ERZIA is a High-Power Amplifier that operates from 30 to 31 GHz. It delivers a saturated output power of 44.5 dBm with a gain of more than 44 dB and has a VSWR of less than 1.8:1. The amplifier has a TTL control with a switch ON/OFF time of 200/1000 ns. It is ideal for a wide range of applications including Industrial/laboratory, SATCOM, telecom, space, aerospace, and military.
Download Datasheet | Product Details
RF Switch
Dual-Path RF Front End Module from 2.3 to 2.7 GHz

RF Switch  from Renesas

The F0452B from Renesas is a Dual Path RF Front End Module that has an RF switch and an LNA with 6 dB gain control in each path. It can be used in the analog front-end receiver of an Active Antenna System (AAS). The FEM operates from 2.3 to 2.7 GHz with a gain of 34 dB and has a noise figure of 1.5 dB at 2.6 GHz.
Download Datasheet | Product Details
Software Defined Radio
8-Channel RFSoC System-on-Module with 6 GHz Bandwidth

Software Defined Radio  from Avnet

The AES-XRF8-ZU47-G from Avnet is an RFSoC System-on-Module with an analog bandwidth of 6 GHz. The module can digitize 8 ADC channels at 6 giga-samples per second (GSPS) and generate complex (I/Q) waveforms through 8 DAC channels at 10 GSPS. High-speed serial connectivity is available for the 25G Ethernet and Xilinx Aurora protocols.
Download Datasheet | Product Details
SATCOM Antenna
1.3 Meter Flyaway VSAT from 7.25 to 31 GHz

SATCOM Antenna  from L3Harris Technologies

The Hawkeye 4 Lite from L3Harris Technologies is a Flyaway VSAT with a Tx frequency range from 7.9 to 31 GHz and an Rx frequency range from 7.25 to 21.2 GHz covering the X, Ku, and Ka bands. It has a 1.3 m parabolic aperture carbon fiber antenna that is circular/linearly polarized and delivers an EIRP of up to 59.9 dBW.
Download Datasheet | Product Details
Diplexer
Multilayer Diplexer from 617-2690 / 3300-5925 MHz for LTE Applications

Diplexer  from TDK

The DPX255925DT-5045F3 from TDK RF Solutions is a Multilayer Diplexer with passbands from 617 to 2690 MHz (Low-Band) and 3300 to 5925 MHz (High-Band). In the low-band, it has an insertion loss of less than 0.65 dB and provides an attenuation of over 15 dB above and below the frequency range. It is available in a surface-mount package that measures 2.5 x 2.0 mm and is ideal for LTE applications.
Download Datasheet | Product Details
Band Pass Filter
Bandpass Filter from 27.5 to 30 GHz

Band Pass Filter  from Cubic Nuvotronics, Inc.

The PSF29B02S from Cubic Nuvotronics is a Bandpass Filter with a passband from 27.5 to 30.0 GHz. It has an insertion loss of less than 1 dB and provides more than 20 dB of rejection above and below the passband. The filter is based on the Nuvotronics PolyStrata Technology that provides high-performance filtering in a small form factor. It can handle up to 2 W of CW input power and has a return loss of 13 dB.
Download Datasheet | Product Details
RF Transceiver
Low-Power RF Transceiver from 413 to 1055 MHz

RF Transceiver  from STMicroelectronics

The S2-LP from STMicroelectronics is an RF Transceiver that operates from 413 to 1055 MHz. It provides a data rate from 0.1 to 500 kbps, has a programmable RF output power up to 16 dBm, and has an Rx sensitivity of -130 dBm. It supports 2(G)FSK, 4(G)FSK, OOK and ASK modulation schemes and can be used in the SIGFOX and MONARCH networks.
Download Datasheet | Product Details
GPS/GNSS Antenna
Active Embedded Helical Antenna for GNSS and L-Band Correction Services

GPS/GNSS Antenna  from Tallysman Wireless

The HC990EXF from Tallysman is an Extended-filter Embedded GNSS Helical Antenna. This RHCP antenna provides a peak gain of 3 dBi at full bandwidth and has an axial ratio of less than 0.5 dB at zenith. It utilizes Tallysman’s latest wideband helical element design and features a low current, low-noise amplifier (LNA) with an integrated low loss pre-filter to prevent harmonic interference from high amplitude signals.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]