PREV 3 Jan, 2022 NEXT

New RF and Microwave Products this Week

3 Jan, 2022 - everything RF Newsletter

Top articles & featured products in 2021. View it in your browser

 
Date: 3 Jan, 2022
 
Sponsored by EMC Directory
 
 
 
Top Articles in 2021
Benefits of RFSOI Technology for mmWave 5G Phased Array Antennas - MixComm
Forward and Reflected IP3 Measurements for Switch Components and Systems - Menlo Micro
UWB Explained: What Secure Ranging Means for the IoT and Beyond - NXP Semiconductors
Essential Design Elements of Isolators and Circulators for Unique Military Requirements - Skyworks Solutions Inc.
Top 10 Questions Engineers Ask About Software Defined Radios - Per Vices
Bluetooth Low Energy 5.1 - Angle of Arrival and Angle of Departure Test Considerations - Litepoint
Radio Frequency Attacks Are A Dangerous Threat To Enterprise Networks - Bastille Networks
What is MANET Technology? - Triad RF Systems
Testing Challenges and Solutions for Accurate Wi-Fi 6 Chipset and Device Characterization - Boonton
Going the Distance: Four Approaches for Expanding the Range of Bluetooth - Laird Connectivity
VSWR and its Effects on Power Amplifiers - Exodus Advanced Communications
The problem of testing amplifiers when close to compression - Rohde & Schwarz
Managing Spectral and Energy Efficiency for Optimal 5G Networks - Rohde & Schwarz
Moving Up in Frequency – Why D-band is the Next Frontier for XHaul - Filtronic
More White Papers
Featured Article
Test and Measurement
Trending RF & Microwave Test Equipment in 2021
The demand for Test & Measurement equipment has increased significantly with the introduction of new technologies like Wi-Fi 6/6E/7, 5G, and their widespread applications in autonomous driving, IoT, and other areas have been introduced. everything RF has compiled a list of trending Test & Measurement products this month. Click here to learn more.
 
Featured Products
RF Amplifier
20 W GaN Bidirectional Amplifier from 1 to 2.5 GHz

RF Amplifier  from NuWaves Engineering

The NW-BA-LS-10-S01-D30 from NuWaves is a Bidirectional Amplifier that operates from 1 to 2.5 GHz in the L and S-Bands. In Tx mode, it delivers a saturated output power of 20 W with a gain of 38 dB. In Rx mode, it provides a gain of more than 12 dB with a noise figure of 2 dB and a P1dB of 16.2 dBm. The amplifier is based on the latest gallium nitride (GaN) technology and has an efficiency of 38%.
Download Datasheet | Product Details
Vector Network Analyzer
Compact USB VNA from 20 kHz to 3.0 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The S7530 is a 75 Ohm 2 Port compact VNA that operates up to 3 GHz. It has a wide dynamic range and can be operated with any Windows PC or laptop. Its small size makes it easy to carry around to test sites or to share within a team. In addition to S parameters (S11, S12, S21, S22) this VNA has a variety of analysis capabilities, including time-domain with gating and frequency offset modes.
Download Datasheet | Product Details
RF Amplifier
30 dB Low Noise Amplifier from 0.5 to 50 GHz

RF Amplifier  from Planar Monolithics Industries

The PEC-30-0R5G50G-22-12-24FF from Planar Monolithics Industries is a Low Noise Amplifier that operates from 0.5 to 50 GHz. It provides a gain of 30 dB (±2.5 dB flatness), has a noise figure of less than 9 dB and a P1dB of over 17 dBm. This LNA requires a DC supply of 12 to 15 V and consumes 600 mA of current. It is available in a module that measures 1.37 x 1.00 x 0.60 Inches and has 2.44 mm-female connectors.
Download Datasheet | Product Details
RF Transistor
490 W GaN HEMT Transistor from 2.11 to 2.17 GHz

RF Transistor  from Wolfspeed, A Cree Company

The GTRA214602FC from Wolfspeed is a GaN on SiC High Electron Mobility Transistor (HEMT) that operates from 2.11 to 2.17 GHz. It delivers an output power of 490 W (P3dB) with a gain of 14.4 dB and has an efficiency of 59%. The transistor supports typical pulsed CW performance with a pulse width of 16 µs and a duty cycle of 10%. This GaN on SiC HEMT requires a supply voltage of 48 V and draws 150 mA of current.
Download Datasheet | Product Details
RF Amplifier
120 W GaN Solid State Power Amplifier from 2 to 8 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2085-1 from Exodus Advanced Communications is a GaN Power Amplifier that operates from 2 to 8 GHz. It provides an output power of more than 120 W with a gain of over 51 dB and excellent flatness compared to TWT’s. It can operate in both CW / Pulsed mode and supports all single channel modulation standards. It can be controlled from the front panel LCD display or via remote interfaces.
Download Datasheet | Product Details
RF Amplifier
1200 W Solid-State Power Amplifier from 10 kHz to 225 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 1200A225A AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 10 kHz to 225 MHz. This self-contained, air-cooled amplifier, when used with an RF sweep generator, provides more than 1200 W of CW power with a gain of over 61.8 dB. It has a noise figure of 7 dB, spurious levels of -70 dBc and harmonic distortion of up to -20 dBc.
Download Datasheet | Product Details
Switch Matrix
8 x 8 Blocking Switch Matrix from DC to 18 GHz

Switch Matrix  from JFW Industries

The 50MS-404 from JFW Industries is an 8 x 8 Blocking Switch Matrix that operates from DC to 18 GHz. It provides an isolation of over 75 dB and has an insertion loss of 1.6 dB @6 GHz. This absorptive switch matrix can handle an average input power of up to 1 W (hot switched) / 30 W (cold switched) and has a switching speed of 15 milliseconds.
Download Datasheet | Product Details
Frequency Synthesizer
10 MHz to 12.5 GHz RF Synthesizer Module

Frequency Synthesizer  from Holzworth Instrumentation

The HSM12001B from Holzworth Instrumentation is an RF synthesizer module that operates from 10 MHz to 12.5 GHz. This microwave CW source is based on a non-PLL platform. The digital/analog hybrid design provides excellent phase noise performance and spurious response, which compliments the phase coherent nature of these signal sources.
Download Datasheet | Product Details
RF Inductor
Near Field Magnetic Induction Antenna Coils

RF Inductor  from Coilcraft

The 2208NF Series from Coilcraft are NFMI (Near Field Magnetic Induction) Antenna Coils that can be used for syncing earbuds/headphones, hearing aids, and other IoT wearable devices in audio data streaming applications. They are optimized for operation at 10.579 MHz and have inductance values of 3.7 / 3.9 µH with a DC resistance of under 740 mOhms.
Download Datasheet | Product Details
RF Amplifier
X-band Low Noise Amplifier from 8 to 12 GHz

RF Amplifier  from AmpliTech

The APT2-08001200-0605-D2 from AmpliTech is an X-band Low Noise Amplifier that operates from 8 to 12 GHz. It provides a gain of 20 dB with a noise figure of less than 0.6 dB and has a P1dB of 8 dBm. The LNA requires a DC supply of 12-15 V and consumes under 35 mA of current. It is based on state-of-the-art PHEMT technology and is compliant to MIL-883 and MIL-45208 standards.
Download Datasheet | Product Details
Microwave Generator
800 W GaN SSPA Microwave Generator from 5725 to 5815 MHz

Microwave Generator  from RFHIC

The RIF58800-20SG from RFHIC is a GaN SSPA based Microwave Generator that operates from 5725 to 5815 MHz. It provides a CW peak power of up to 800 W with a power control resolution of 10 W and has power stability of up to 1 %. The generator has a phase adjustment range of 180 degrees and a phase control resolution of 10 degrees.
Download Datasheet | Product Details
RF Shielded Test Enclosure
Stand Alone RF Tunnel Shielded Box from 20 MHz to 40 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-3590 from RF Electronics is a Stand Alone RF Tunnel Shielded Box that operates from 20 MHz to 40 GHz. This fully portable design is equipped with caster wheels for ease of movement. The interior of this enclosure measures 650(W) X 650 (H) X 2050 (L) mm. It has a thick RF absorbing foam that provides isolation of more than 120 dB @ 3 GHz.
Download Datasheet | Product Details
RF Variable Attenuator
70 dB Variable Step Attenuator from DC to 2.2 GHz

RF Variable Attenuator  from MECA

The 680-70-1 from MECA is a Variable Step Attenuator that operates from DC to 2.2 GHz. It has an attenuation range of 0 to 70 dB in 10 dB steps (manually controlled via a knob) and an insertion loss of under 0.5 dB. The attenuator can handle an average input power of 2 W, and a peak input power of 1 kW with a VSWR of less than 1.4:1.
Download Datasheet | Product Details
OCXO
Miniature OCXO from 30 to 300 MHz

OCXO  from Dynamic Engineers

The OCXO3319AW from Dynamic Engineers is a Miniature OCXO with a frequency from 30 to 300 MHz. It provides HCMOS (TTL) or Sinewave outputs with an SSB phase noise of -158 dBc/Hz @ 100 kHz offset. The OCXO has frequency stability of better than ±10 ppb, a warmup time of 30 s, and an aging of ±0.05 ppm per year. It operates over a supply voltage of 5 V and consumes less than 1200 mW of power.
Download Datasheet | Product Details
Software
3D Wireless Prediction Software

Software  from Remcom

Wireless InSite® is a suite of ray-tracing models and high-fidelity EM solvers for the analysis of site-specific radio wave propagation and wireless communication systems. The RF propagation software provides efficient and accurate predictions of EM propagation and communication channel characteristics in complex urban, indoor, rural and mixed path environments.
Download Datasheet | Product Details
Featured Article
Top 5G Products of the 2021
Top 5G Products in 2021
5G delivers high-speed, low-latency communication – which is achieved by utilizing cutting-edge solutions. This article lists trending 5G products on everything RF in 2021. Click Here to learn more.
 
RF & Microwave Circulator
100 W Drop-In Circulator from 860 to 960 MHz

RF & Microwave Circulator  from VidaRF

The VDC-086096 from VidaRF is a Drop-In Circulator that operates from 860 to 960 MHz. It has an insertion loss of 0.5 dB and an isolation of 20 dB. The circulator can handle up to 100 watts of forward power, 500 watts of peak power, and has a VSWR of less than 1.25:1. This RoHS-compliant circulator is available in a module that measures 25.4 x 25.4 x 7.62 with connectors.
Download Datasheet | Product Details
Rubidium Oscillator
High-Performance, Space-Qualified Rubidium Atomic Frequency Standard

Rubidium Oscillator  from Orolia

The RAFS (Rubidium Atomic Frequency Standard) from Orolia is a state-of-the-art ultra-stable atomic clock that provides excellent stability. It’s designed with the latest technologies, providing advanced features, such as long lifetime, high reliability, lightweight and ultra low phase noise, for next-generation space applications.
Download Datasheet | Product Details
RF Amplifier
71 to 76 GHz E-band Power Amplifier for Point to Point Radios

RF Amplifier  from Filtronic

The Cerus from Filtronic is an E-band Power Amplifier that operates from 71 to 76 GHz. This amplifier has been developed for high-capacity E-band point-to-point radios. It provides an output power of up to 35 dBm with a small signal gain of under 18 dB. The amplifier requires a supply of 4V while consuming up to 10 A of current. It supports high-order modulation schemes including 256QAM.
Download Datasheet | Product Details
RF Amplifier
0.5 W Power Amplifier from 10 MHz to 30 GHz

RF Amplifier  from Mini Circuits

The ZVA-0.5W303G+ from Mini-Circuits is a Power Amplifier that operates from 10 MHz to 30 GHz. It delivers a saturated output power of 0.5 W with a gain of more than 20 dB and has a noise figure of less than 7.5 dB. The amplifier includes safety features such as protection against DC transients, over-voltage and reverse-voltage conditions to provide reliability for demanding operating conditions.
Download Datasheet | Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzer from 100 kHz to 43.5 GHz

RF Spectrum Analyzer  from Signal Hound

The SM435B from Signal Hound is a real-time spectrum analyzer and monitoring receiver that operates from 100 kHz to 43.5 GHz. It has 160 MHz of instantaneous bandwidth, a dynamic range of 110 dB, 1 THz/sec sweep speed at 30 kHz RWB (using Nutwall windowing), and ultra low phase noise. The low levels of phase noise rival some of the more expensive spectrum analyzers on the market.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Vector Network Analyzers from 5 kHz to 20 GHz with Optional Spectrum Analyzer

Vector Network Analyzer  from Rohde & Schwarz

The R&S ZNL Series from Rohde & Schwarz are two-port Vector Network Analyzers that operate from 5 kHz to 20 GHz. They provide excellent performance with a dynamic range up to 130 dB and output power range from -40 dBm to +3 dBm. The standard features include embedding/de-embedding, fixture compensation, time-domain measurements, and support of automatic calibration units.
Download Datasheet | Product Details
RF Spectrum Analyzer
Dual USB Real-Time Spectrum Analyzer with 245 MHz true I/Q streaming

RF Spectrum Analyzer  from Aaronia AG

The SPECTRAN V6 X from Aaronia is a high-performance USB real-time spectrum analyzer that operates from 10 MHz to 6 GHz. The analyzer support dual USB True I/Q streaming of up to 245 MHz (IQ rate) real-time bandwidth. Multiple devices can be cascaded together to achieve an even higher real-time bandwidth.
Download Datasheet | Product Details
Switch Matrix
8x8 Bi-directional Blocking Switching Matrix from 100 kHz to 8.5 GHz

Switch Matrix  from Becker Nachrichtentechnik GmbH

The BSWM-8X8ER from Becker Nachrichtentechnik is an 8x8 blocking Switching Matrix that operates from 100 kHz to 8.5 GHz. It offers 8 fully parallel bi-directional signal paths making it suitable for bidirectional point to point links. The matrix can handle an input power of up to +30 dBm and provides high channel isolation to avoid unintended coupling between different types of signals.
Download Datasheet | Product Details
GNSS Anti-Jamming Solution
GNSS Anti-Jamming CRPA System

GNSS Anti-Jamming Solution  from TUALCOM

The TUALAJ 8300 from Tualcom is a GNSS Anti-Jamming CRPA solution with an embedded receiver that provides jam free GNSS signals for critical missions. It eliminates interference by applying a novel beamforming technique. With an 8-array Controlled Reception Pattern Antenna (CRPA) antenna, the system can ensure normal operation of GNSS receiver in presence of multiple jamming sources.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]