PREV 5 Jan, 2022 NEXT

Top T&M Products in 2021

5 Jan, 2022 Newsletter - everything RF

Trending T&M products and news in 2021. View it in your browser

 
Top T&M Products in 2021
Date: 5 Jan, 2022
 
Sponsored by EMC Directory
 
 
Top T&M Products in 2021
RF Spectrum Analyzer
High Performance Signal Analyzers for mm-Wave 5G and SATCOM Applications
RF Spectrum Analyzer  from Keysight Technologies
The N9042B UXA X-Series from Keysight Technologies are Signal Analyzers that operate from 2 Hz to 26.5/44/50 GHz and cover current 5G-NR, FR1, FR2 as well as most RADAR, EW and satellite bands. They have an ultra wide analysis bandwidth of up to 11 GHz which is configured using an external digitizer. They also have a deep dynamic range to help solve the most difficult mmWave challenges.
Download Datasheet | Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzer from 100 kHz to 43.5 GHz
RF Spectrum Analyzer  from Signal Hound
The SM435B from Signal Hound is a real-time spectrum analyzer and monitoring receiver that operates from 100 kHz to 43.5 GHz. It has 160 MHz of instantaneous bandwidth, a dynamic range of 110 dB, 1 THz/sec sweep speed at 30 kHz RWB (using Nutwall windowing), and ultra-low phase noise. The low levels of phase noise rival some of the more expensive spectrum analyzers on the market.
Download Datasheet | Product Details
RF Spectrum Analyzer
Dual USB Real-Time Spectrum Analyzer with 245 MHz true I/Q streaming
RF Spectrum Analyzer  from Aaronia AG
The SPECTRAN V6 X from Aaronia is a high-performance USB real-time spectrum analyzer that operates from 10 MHz to 6 GHz. The analyzer support dual USB True I/Q streaming of up to 245 MHz (IQ rate) real-time bandwidth. Multiple devices can be cascaded together to achieve an even higher real-time bandwidth. The analyzers have a DANL of -170 dBm/Hz with internal pre-amp on and an amplitude accuracy of +/- 0.5 dB.
Download Datasheet | Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzer from 16 kHz to 14/26.5 GHz
RF Spectrum Analyzer  from Tektronix, Inc.
The RSA7100B from Tektronix is a Spectrum Analyzer that operates from 16 kHz to 14/26.5 GHz. It offers real-time spectrum analysis with a bandwidth of up to 800 MHz and has a phase noise of -134 dBc/Hz @ 10 kHz offset (1 GHz operating frequency). The analyzer separates the RF acquisitions from the compute engine which allows a graphics processor to be used in place of previously-required FPGA designs for real-time processing.
Download Datasheet | Product Details
RF Spectrum Analyzer
Handheld Spectrum Analyzer from 6 to 20 GHz
RF Spectrum Analyzer  from SAF Tehnika
The J0SSAP52 from SAF is a Compact Spectrum Analyzer that operates from 6 to 20 GHz. It supports continuous and manual sweep functions and has a real-time bandwidth of up to 1 MHz. The analyzer has a frequency resolution of 30 kHz and an amplitude accuracy of ±1 dBm. Standard measurements of this analyzer include channel power, adjacent channel power, signal bandwidth, center frequency, interference detection, and mask.
Download Datasheet | Product Details
Signal Generator
Vector Signal Generator from 100 kHz to 44 GHz
Signal Generator  from Rohde & Schwarz
The R&S SMM100A from Rohde and Schwarz is a Vector Signal Generator that operates from 100 kHz to 44 GHz. It can be used for a wide range of applications including existing wireless standards and 5G NR FR1 in the Sub-6GHz band, Wi-Fi 6E up to 7.125 GHz and 5G NR FR2 bands up to 44 GHz. This signal generator offers a maximum output power of +18 dBm, which reduces the need for external amplifiers.
Download Datasheet | Product Details
Featured Article
Mergers & Acquisitions in 2021
Mergers & Acquisitions in 2021
2021 saw multiple mergers or acquisitions taking place throughout the year in the RF & Microwave Industry. We have created a complete list of all the mergers/acquisitions that made headlines in the RF & Microwave Industry. Click here to read the article.
Signal Generator
USB Programmable Signal Generator from 6 to 18 GHz
Signal Generator  from Vaunix
The LMS-183CX from Vaunix is a USB Programmable RF Signal Generator that operates from 6 to 18 GHz. It has a resolution of 100 Hz and switching time of 0.02 ms. The signal generator provides calibrated power control from -70 dBm to 10 dBm (80 dB dynamic range) in 0.5 dB steps. It has a phase noise of better than -130 dBc/Hz at 6 GHz, spurious levels lower than -55 dBc and harmonics less than -35 dBc.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer
Phase Noise Analyzer  from Holzworth Instrumentation
The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. It is available in a fully shielded, fan-less 1U chassis that completely eliminates ground loops and troublesome microphonics for uncompromised performance and repeatability.
Download Datasheet | Product Details
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 1 MHz to 6 GHz
Vector Network Analyzer  from Copper Mountain Technologies
The R60 is a single port USB-powered VNA (Reflectometer) capable of measuring S11 from 1 MHz to 6.0 GHz. It can be operated from any Windows PC or laptop using a USB cable. The R60 provides a wide variety of analysis capabilities, including S11, time-domain with gating, DTF measurements and much more.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Modular VNA from 300 KHz to 6 GHz
Vector Network Analyzer  from Mini Circuits
The eVNA from Mini Circuits is a high quality, affordable VNA that operates from 300 kHz to 6 GHz. This 2 Port modular VNA has a dynamic range of greater than 120 dB, trace noise of less than 0.008 dBrms, and an output power from -50 to 7 dBm. It can be used to measure all 4 S-Parameters (S11, S21, S12, S22) as well as absolute receiver quantities from reference and reflection receivers.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port Vector Network Analyzers from 5 kHz to 20 GHz with Optional Spectrum Analyzer
Vector Network Analyzer  from Rohde & Schwarz
The R&S ZNL Series from Rohde & Schwarz are two-port Vector Network Analyzers that operate from 5 kHz to 20 GHz. They provide excellent performance with a dynamic range up to 130 dB and output power range from -40 dBm to +3 dBm. The standard features include embedding/de-embedding, fixture compensation, time-domain measurements, and support of automatic calibration units.
Download Datasheet | Product Details
RF Test Set
5G/LTE/802.11ax Universal Wireless Test Set from 10 MHz to 6 GHz
RF Test Set  from Anritsu
The MT8872A from Anritsu is a Universal Wireless Test System that operates from 10 MHz to 6 GHz. It has been designed for testing high volume smartphones, tablets, Automotive Solutions, IoT devices and wireless modules. The test set supports various wireless communications standards, including 5G NR Sub-6 GHz, LTE/LTE-Advanced, LTE-V2X, NB-IoT, Cat-M, V2X 802.11p, WLAN and Bluetooth.
Download Datasheet | Product Details
RF Test Set
2/8/16-Port Test System for Wi-Fi 7, Wi-Fi 6E, and Wi-Fi 6
RF Test Set  from LitePoint
The IQxel-MX from LitePoint is a Test System for Wi-Fi 7, Wi-Fi 6E, Wi-Fi 6, and all other Wi-Fi standards. It also supports all Bluetooth device standards (1.x, 2.x, 3.0, 4.x, 5) and the newly released BT 5.1 and BT 5.2 along with ZigBee, Z-Wave, and WiSUN. The system also supports LoRa and Sigfox LPWAN technologies.
Download Datasheet | Product Details
RF Spectrum Analyzer
Weatherproof RF Receiver from 9 kHz to 8 GHz for Spectrum Monitoring
RF Spectrum Analyzer  from CRFS
The RFeye Node 40-8 from CRFS is a purpose built RF receiver for spectrum regulators that combines high performance spectrum monitoring with a rugged form factor at an affordable price. It provides real-time spectrum operations and is low in Size, Weight, and Power (SWaP) making it easy to deploy where it is needed. The receiver has an operating frequency from 9 kHz to 8 GHz and a sampling rate of 62.5 MS/s I&Q.
Download Datasheet | Product Details
RF Test Set
Portable Communications Service Test Solution from 100 kHz to 6 GHz
RF Test Set  from Viavi Solutions
The CX300 ComXpert from Viavi is a Communications Service Monitor Test Solution that operates from 100 kHz to 6 GHz. It is a comprehensive communications test and alignment solution in an easy-to-use, ruggedized form factor. The CX300 is an LTE-ready radio test set equipped to test both radio and broadband network infrastructure, helping today''''s radio technicians ensure complete communications coverage.
Download Datasheet | Product Details
RF Spectrum Analyzer
Real-Time Outdoor Remote Spectrum Analyzer from 8 kHz to 8 GHz
RF Spectrum Analyzer  from Narda Safety Test Solutions
The SignalShark Outdoor Unit from Narda Safety Test Solutions is a Real-Time Outdoor Remote Spectrum Analyzer that operates from 8 kHz to 8 GHz. It supports automatic direction finding and localization via AoA (Angle of Arrival) and TDOA (Time Difference of Arrival). The analyzer has three switchable RF inputs and an RF front-end module that offers outstanding sensitivity and has a wide dynamic range.
Download Datasheet | Product Details
Handover Test System
95 dB 8 x 1 Programmable Attenuator Assembly from 30 to 6000 MHz
Handover Test System  from JFW Industries
The 50PA-1205 from JFW Industries is a Handover Test System that operates from 30 to 6000 MHz. It consists of eight programmable attenuators (0-95dB x 1dB step) that connect to an 8-Way splitter/combiner. The eight attenuators can be remotely controlled via an Ethernet connection. Handover test systems are used to assess the performance of interconnected wireless devices under real-world operating conditions in a lab environment.
Download Datasheet | Product Details
Noise Generator
40 GHz Programmable AWGN Noise Generator
Noise Generator  from Noisecom
The UFX7000B from Noisecom is a Programmable AWGN Noise Generator that operates up to 40 GHz. The noise generator incorporates a broadband noise source and noise path attenuator (with a maximum attenuation range of 127 dB in 1 dB steps). It provide an output power of up to +30 dBm with excellent flatness.
Download Datasheet | Product Details
Power Sensor
Three-Path RF Power Sensor from 50 MHz to 67 GHz
Power Sensor  from Rohde & Schwarz
The R&S NRP67S/SN from Rohde & Schwarz is a Power Sensor that operates from 50 MHz to 67 GHz. It has a dynamic range from -70 dBm to 20 dBm and a measurement rate of 10,000 measurements per second. The power sensor uses a three-path technology which enables extremely fast and accurate measurements with high-sensitivity.
Download Datasheet | Product Details
RF Power Meter
10 kW RF Power Meter from 0.2 to 200 MHz
RF Power Meter  from TEGAM
The GEMINI 5540A from TEGAM is an RF Power Meter that operates from 0.2 to 200 MHz. It has a power measurement range from 3 to 10,000 W with a 2-sigma accuracy of ±0.5% + 0.5 W across its power range. This power meter combines the sensor and meter into one convenient instrument which allows technicians to read forward and reverse power, VSWR, and frequency simultaneously.
Download Datasheet | Product Details
RF Power Meter
Peak Power Analyzer from 30 MHz to 40 GHz
RF Power Meter  from Boonton
The 4500C from Boonton is a Peak Power Analyzer that operates from 30 MHz to 40 GHz. It is ideal for capturing, displaying, analyzing and characterizing microwave and RF power in both the time and statistical domains. It has a base time resolution of less than 100 ps from its B trigger qualifier and gives a dynamic range of greater than 80 dB.
Download Datasheet | Product Details
RF Spectrum Recording and Playback System
Real-Time Spectrum Analysis RF Record and Playback System
RF Spectrum Recording and Playback System  from TEVET
The LibertyGT from TEVET is a Real-Time Spectrum Analysis (RTSA) RF record and playback system that is available in multiple frequency options of 6, 14, 18, 26.5, and 40 GHz. It features up to 16 synchronized channels and supports bandwidths from 50 MHz to 1 GHz. It has a modular, portable and scalable design which provides test engineers a flexible tool to identify electronic warfare, 5G signals, and other new and emerging threats.
Download Datasheet | Product Details
GNSS Simulator
Software-Defined GNSS Simulator for Space Trajectories and PNT Applications
GNSS Simulator  from Orolia
The GSG-8 from Orolia is a Software-Defined GNSS Simulator that delivers the highest standard of Global Navigation Satellite System (GNSS) signal testing and sensor simulation performance in an easy-to-use, upgradable and scalable platform. This software-powered turnkey simulator supports multi-constellation, multi-frequency, and hundreds of signals with a 1000 Hz iteration rate.
Download Datasheet | Product Details
RF Test Set
5G-NR C-V2X Test Solution with GNSS Emulation
RF Test Set  from Keysight Technologies
The SA8700A C-V2X Test Solution from Keysight is a comprehensive test solution enabling functional, protocol, and RF measurements of C-V2X devices. It is based on Keysight’s new UXM 5G platform, with support for future releases of 5G NR C-V2X, and the MXG for GNSS emulation.
Download Datasheet | Product Details
EMF Meter / Antenna
Laser-Powered Electric Field Probe Kit from 5 kHz to 200 MHz
EMF Meter / Antenna  from AR RF/Microwave Instrumentation
The FL8200 from AR RF/Microwave Instrumentation is an advanced Laser-Powered Electric Field Probe and Associated Kit that operates from 5 kHz to 200 MHz. It has been designed specifically for EMC radiated immunity test applications. Each field probe is an electrically small, separable axis sensor capable of measuring both continuous wave and pulsed electric fields.
Download Datasheet | Product Details
Top T&M News in 2021
thinkRF Downconverters Cost-Effectively Extend the Range of Existing RF Analyzers for mmWave 5G - thinkRF
World's Smallest RF Signal Generator from 10 MHz to 15 GHz - Windfreak Technologies
Rohde & Schwarz Introduces Software that Combines EDA Simulation with Hardware Testing - Rohde & Schwarz
UL Expands its EMC and Wireless Testing Lab in Italy - UL
AMETEK Acquires NSI-MI Technologies for $230 Million - AMETEK CTS
Real Time Spectrum Analyzer with GPS Functionality for Wireless Situational Awareness Applications - thinkRF
New Spectrum Analyzer Enables Customers to Test mmWave Innovations in 5G, A&D and SATCOM - Keysight Technologies
CRFS Introduces RF Receiver Specifically Designed for Spectrum Regulators - CRFS
Vector Network Analyzer from CMT Helps Conduct X-Ray Free Mammogram - Copper Mountain Technologies
Aaronia Introduces the World's first 6 GHz USB Spectrum Analyzer with 245 MHz True IQ Streaming - Aaronia AG
More News
Featured Article
Top 5G Products in 2021
Top 5G Products in 2021
5G delivers high-speed, low-latency communication – which is achieved by utilizing cutting-edge solutions. This article lists trending 5G products on everything RF in 2021. Click here to learn more.
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. This newsletter lists the 25 most viewed T&M products on everything RF in 2021.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]