PREV 24 November, 2014 NEXT

News, White Papers & Featured Products

Nov 24, 2014 - everything RF Newsletter
 
everything RF
Date: Nov 24, 2014
 
Industry News
New Lighter and Efficient Radio Wave Circulator Design Could Transform Telecommunications - University of Texas
Tektronix Announces Affordable, Full-Featured Portable Spectrum Analyzer - Tektronix
New RF Filter Technologies Solve Tough LTE Coexistence Challenges - TriQuint
API Technologies High-performance Cable Assemblies Have a VSWR of Less Than 1.5:1 - API Technologies
Skyworks Reports Record Q4 FY14 Results - Skyworks
MtronPTI Adds a Range of Solid State Power Amplifiers - MtronPTI
More News
White Papers
Video: How-to Build a Rectangular Waveguide in XFdtd - Remcom
Understanding S-Parameter vs Equivalent Circuit-Based Models for RLC Component Simulations in Keysight ADS and Genesys - Modelithics Inc.
Optimizing Performance When Integrating Multiple Antennas - Ethertronics
Testing M2M RF Modems with Aeroflex RF Test Solutions - Cobham Wireless
Testing S-Parameters on Pulsed Radar Power Amplifier Modules - Rohde & Schwarz
More White Papers
Upcoming Events
Event Image
IMaRC 2014 - International Microwave and RF Conference

Date: 15 to 17, December 2014

Location: Bangalore, India

 
More Upcoming events
Find & Compare Waveguide Products
 
 
 
Featured RF & MW Products
Band Pass Filter
744.5 MHz Cavity Filter for LTE Applications

Band Pass Filter from Networks International Corporation

The 744.5 MHz Cavity Filter from NIC is a high performance Cavity filter for LTE base station applications. It operates from 730 to 759 MHz with an insertion loss of 0.8 dB and an attenuation of 65 dB. The filter can handle up to 150 W of power and provides high rejection in adjacent LTE bands to reduce interference. It is available with 7/16 DIN-F or N-Female connectors in a module that measures 176.0 x 88.0 x 62.0 mm.
 
Download Datasheet | Product Details
 
Diplexer
S Band Cavity Diplexer with 2025 to 2120 MHz & 2200 MHz to 2300 MHz Passbands

Diplexer from Networks International Corporation

The S Band Cavity Diplexer from NIC has been designed for use in S band ground-based radars with its lower pass band from 2025 to 2120 MHz and its upper pass band from 2200 MHz to 2300 MHz. It has an insertion loss of 0.6 dB, an isolation of 60 dB and a VSWR of 1.3:1. It is available in custom designs up to K-band frequencies. The diplexer is available in a rugged modular design to withstanding harsh environmental conditions. It measures 6.0 x 1.5 x 3.0 inches and has SMA Female connectors.
 
Download Datasheet | Product Details
 
Drop-In Isolator
5W Drop-In Isolator/Circulator from 1880 to 1920 MHz

Drop-In Isolator from VidaRF

The VDI18819205 from VidaRF is a Drop-In Isolator/Circulator for demanding applications where space is limited. It operates at a frequency from 1880-1920 MHz, with an isolatoin of 24 dB, insertion loss of 0.25 dB, VSWR of 1.13:1 and an IMD of -65 dBc.The new rugged design uses a machined steel housing, screwed on cover and is fully tested to handle shock, vibration, thermal shock, and moisture. To help ensure long term performance in a variety of applications, these packages are Beryllium oxide (BeO) free and Neodymium (Nd) free.
 
Download Datasheet | Product Details
 
Coaxial Termination
50 Watts N Type Male Low PIM Termination

Coaxial Termination from MECA

The LPTC50-DF is an N-Male termination low PIM termination that operates from 698 MHz to 2.7 GHz. It can handle up to 50 Watts of avg. power and 2500 Watts of peak power with a VSWR of 1.10:1 and PIM of less than -160 dBc. The termination has a length of 5.50 inches, a diameter of 2.25 inches and has brass albaloy plated connectors.
 
Download Datasheet | Product Details
 
In Series RF Adapter
Right Angle SMA Male to Female Adapter from DC to 27 GHz

In Series RF Adapter from HASCO Components

The SMAJ-SMAP-RA is a right angled SMA adapter that operates from DC to 27 GHz. It is matched to 50 ohms and has a VSWR of 1.20:1 from DC to 18 GHz and 1.35:1 from 18 to 27 GHz. The adapter is housed in passivated stainless steel and can withstand voltage of 1000 V RMS.
 
Download Datasheet | Product Details
 
RF Cable Assembly
18 GHz Hand Formable Cable Assemblies with 0.141 Inch Diameter

RF Cable Assembly from HASCO Components

The HA141AL is a series of hand formable cable assemblies from HASCO that operate up to 18 GHz. The cables are RoHS compliant and are available with SMA (straight and right angle) connectors. The cables have an insertion loss of 0.8 dB/ft, capacitance of 29 pF/ft, velocity propogation of 70% and RF leakage of greater than 100 dB at 18 GHz.
 
Download Datasheet | Product Details
 
Fixed Attenuator
0 to 10 dB, 12, 15 and 20 dB, 0.75 to 4 W Fixed Attenuator from DC to 18 GHz

Fixed Attenuator from Aeroflex - Inmet

The PCAAW Series of fixed chip attenuators that are available in attenuation configuration from 0 to 20 dB. These attenuators consist of a laser trimmed distributed thin film element on an alumina ceramic substrate with a protective paint layer and solderable leads. They have an attenuation accuracy of 0.5 to 1 dB and a VSWR of under 1.5:1.
 
Download Datasheet | Product Details
 
RF Amplifier
Successive Detection Logarithmic Video Amplifier (SDLVA) from 600 MHz to 1.1 GHz

RF Amplifier from Planar Monolithics Industries

The SDLVA-0R61R1-65-CD-SFF-2 is a Successive Detection Logarithmic Video Amplifier (SDLVA) that operates from 600 MHz to 1.1 GHz. It provides a limited RF output of 0 to 5 dBm with an input of -60dBm. The amplifier has a rise time and fall time of 30 ns with a recovery time of 80 ns. It requires a supply of 12/15V and draws up to 300 mA of current. It is available in a module with SMA female connectors. This model has been designed for high speed applications while maintaining flatness and accuracy.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
6 to 12 GHz Analog Controlled Pin Diode Attenuator

RF Variable Attenuator from Planar Monolithics Industries

The PVVAN-6012-60-MP from PMI is an analog controlled pin diode attenuator that operates from 6 to 12 GHz. It has an attenuation range of 60 dB, an insertion loss of 2.8 dB and a VSWR of 2.0:1. The attenuator can handle up to 30 dBm CW of power, has a switching time of 500 nsec and requires a supply of 12/15 V while drawing up to 125 mA of current. It is available in a module with SMA Female connectors and measures 2 x 1.80 x 0.50 inches.
 
Download Datasheet | Product Details
 
RF Amplifier
2110 to 2170 MHz GaN Hybrid Amplifier for LTE Applications

RF Amplifier from RFHIC

The HT2121-15A from RFHIC is a GaN hybrid power amplifier that operates from 2110 to 2170 MHz. It has been designed for LTE Repeaters & RF Sub-system applications to provides high efficiency & a high power density. The amplifier provides an average power of 33 dBm with a gain of 31.5 dB to 34.5 dB and requires a supply voltage of 28 V DC while drawing 290 mA of current. This device is available in a surface mount package that measures 20.5 x 15 x 4.8 mm and is ideal for use in RF sub-systems, base stations, repeaters, small cells and LTE systems.
 
Download Datasheet | Product Details
 
RF Connector
50 Ohm and 75 Ohm SSMCX RF Connectors

RF Connector from MOLEX

The SSMCX connectors are 35% smaller than regular MMCX connectors and operate up to 6 GHz. They are available in 50 Ohm and 75 Ohm configurations with both magnetic and non-magnetic versions. The SSMCX connectors are ideal for multi-port, high density RF applications. They are available in 4 and 6 port layouts with vertical and right angle orientations, coax contacts on a 3 mm pitch. They can handle up to 170 Vrms and operate at temperatures from - 55°C TO + 155°C.
 
Download Datasheet | Product Details
 
GPS/GNSS Antenna
Miniature GNSS Receive Passive Horizontal-Mount PCB Antenna

GPS/GNSS Antenna from Parsec Technologies, Inc.

The PTA1.5-17 is a miniature printed circuit board (PCB) laminate based passive antenna that operates from 1560 to 1610 MHz. It easily integrates with GNSS/GPS receivers with a single direct connection. The antenna has a gain of -0.54 dB at 1560 MHz, has a low noise figure of 1 dB and requires a supply voltage. The antenna has a dimension of 6.55 x 17.35 x 0.8mm (L x W x thickness). It is mounted horizontally with respect to Earth within miniature GNSS receivers via surface mount technology (SMT) reflow using low cost industry standard methods.
 
Download Datasheet | Product Details
 
RF Amplifier
9.3 to 9.5 GHz, GaN HEMT Pulse Amplifier Module for Radar

RF Amplifier from RFHIC

The RRM9395200-56 from RFHIC is a GaN HEMT pulse amplifier module for radar systems which operates from 9.3 to 9.5 GHz. It has a gain of 56 dB with ±0.5 dB flatness, an output pulse power of 200 W, a duty cycle of 10%, an efficiency of 20% and requires a 50 V Supply. It has a VSWR of 2:1, a switching time from 250 ns to 300 ns and rise time of 50 ns. It has SMA female connectors and is housed in a package which measures 140 x 140 x 25 mm.
 
Download Datasheet | Product Details
 
Waveguide Product Database
Waveguides
Find & Compare Waveguide Products
Find & Compare Waveguide Components using the parametric search tools on everything RF. There are over 6000 Products listed from more than 20 Manufacturers in 10 Categories. Download datasheets, get quotations and discovery new products based on your requirement.
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.