PREV 19 November, 2014 NEXT

New RF & Microwave Products this Week

Nov 19, 2014 - everything RF Newsletter
 
everything RF
Date: Nov 19, 2014
 
Sponsored by Aeroflex / Inmet
 
 
 
New RF & Microwave Products this Week
GPS/GNSS Module
High Performance, Compact GPS Module for Wearable Devices

GPS/GNSS Module from OriginGPS

The Micro Spider is an integrated high performance GPS Module that has been developed for smart watches, wearable devices, trackers and other compact devices. This module continuously tracks all satellites in view, providing real-time positioning data in standard NMEA format. It consists of an integrated LNA, SAW filter, TXCO and RTC crystal, a power management unit and a RF shield. The module has a sensitivity of -163 dBm and measures 5.6 x 5.6 mm.
 
Download Datasheet | Product Details
 
GPS/GNSS Module
Miniature GNSS/GPS Active Antenna

GPS/GNSS Module from Parsec Technologies, Inc.

The PTA1.5x2M-22 is a miniature high radiated efficiency GNSS/GPS L1 active antenna. The antenna module measures 10.5 x 20.65 x 0.8 mm and easily integrates with industry leading GNSS/GPS 3D-SIPs and system on chip (SoC) receivers with a single direct connection. It has an average gain of -1.94 dBi, VSWR of 1.5:1 and radiated efficiency of more than 60 %.
 
Download Datasheet | Product Details
 
GPS/GNSS Antenna
SMD GPS Antenna for Embedded Applications

GPS/GNSS Antenna from Antenova

The A10137 Cyaneus GPS Co-planar antenna has been developed for the reception of GPS signals at 1575 MHz. The antenna used the ground plane in order to radiate efficiently (should be at least 20 x 30 mm). It has a gain bandwidth of 30 MHz, gain of -2.2 dB and efficiency of 69%. The antenna is available in a small footprint that measures 9 x 20.1 x 1.6 mm.
 
Download Datasheet | Product Details
 
Digital Attenuator
4 Channel USB Programmable Attenuator from 0.5 to 6 GHz

Digital Attenuator from Adaura Technologies

The Adaura Technologies AD-USB4A series of digital programmable attenuators operate from 0.5 to 6 GHz. The attenuators have a range from 0 to 63 dB with 1 dB increments. Four independent channels can be controlled and powered via one single USB port. An easy to use GUI provides fixed attenuations as well as flexible ramp functions. Custom automation is easily accomplished via simple serial port commands on any Windows or Linux based PC.
 
Download Datasheet | Product Details
 
Band Pass Filter
744.5 MHz Cavity Filter for LTE Applications

Band Pass Filter from Networks International Corporation

The 744.5 MHz Cavity Filter from NIC is a high performance Cavity filter for LTE base station applications. It operates from 730 to 759 MHz with an insertion loss of 0.8 dB and an attenuation of 65 dB. The filter can handle up to 150 W of power and provides high rejection in adjacent LTE bands to reduce interference. It is available with 7/16 DIN-F or N-Female connectors in a module that measures 176.0 x 88.0 x 62.0 mm.
 
Download Datasheet | Product Details
 
RF Transistor
4.4 to 5 GHz GaN Transistor provides 200 Watts CW

RF Transistor from Cree

The CGHV50200F from Cree is a GaN HEMT transistor that operates from 4.4 to 5 GHz. This high efficiency transistor can provide up to 200 W of CW power with a gain of 11.5 dB. It is ideal for troposcatter communications, 4.4 - 5.0-GHz C-Band SatCom applications and beyond line of sight applications. The transistor is available in a ceramic/metal flange package and is matched to 50 Ohms.
 
Download Datasheet | Product Details
 
Sponsored by Aeroflex / Inmet
Aeroflex - Inmet
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability.To learn more, download the data sheet.
 
 
 
RF Transistor
140 Watts LDMOS RF Transistor Operates up to 1 GHz

RF Transistor from NXP Semiconductors

The BLF881(S) is an LDMOS power transistor that provides up to 140 Watts of power at frequencies up to 1 GHz. It has been designed for industrial and broadcast transmitter applications. This transistor has also been used for RF heating applications where it was used to replace the magnetron in a Microwave Oven. It requires a 50 V Supply and has a good efficiency.
 
Download Datasheet | Product Details
 
RF Amplifier
900 to 990 MHz Power Amplifier Module for WCDMA Applications

RF Amplifier from Skyworks

The SKY66008-11 is a linear Power Amplifier (PA) that operates from 900 to 990 MHz. It provides 19 dBm of linear power and has a small signal gain of 29 dB. The amplifier meets the stringent spectral linearity requirements of WCDMA femtocell applications with a high power-added efficiency. An integrated directional coupler eliminates the need for any external coupler. It requires a supply voltage from 3.3 V to 4.6 V and is available in 10-pin, 3 x 3 mm Multi-Chip Module (MCM).
 
Download Datasheet | Product Details
 
Power Sensor
10 MHz to 8 GHz USB Power Sensor with -60 to 20 dBm Dynamic Range

Power Sensor from Aeroflex Test Solutions

The SPS-8 is a high performance USB power sensor that operates from 10 MHz to 8 GHz with a -60 to 20 dBm dynamic range. It can make up to 2000 measurements per second and requires no calibration. The sensor can be used to make CW, average and pulsed power measurements. It has been designed to plug and play with the S-Series signal generators from Cobham Wireless.
 
Download Datasheet | Product Details
 
Signal Generator
9 kHz to 6.1 GHz, 19’’ 1U Rackmount Signal Generator

Signal Generator from AnaPico

The APSIN6010RM from AnaPico is a 19’’ 1U rackmount, low phase noise RF signal generator that operates from 9 kHz to 6.1 GHz. It can deliver a power range from -120 to 18 dBm, has a switching time of 200 µs and a SSB phase noise of -130 dBc/Hz at 20 kHz. This generator combines excellent signal quality, analog modulation and allows complex signal modulation. It has optional LAN/USB/GPIB remote control options with powerful trigger and sweeping modes.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
USB Real Time Spectrum Analyzer from 9 kHz to 6.2 GHz

RF Spectrum Analyzer from Tektronix, Inc.

The RSA306 is a compact/portable Real Time Spectrum Analyzer that uses your PC and Tektronix SignalVu-PC™ RF Signal Analysis Software to provide real time spectrum analysis, streaming capture and deep signal analysis capabilities for signals from 9 kHz to 6.2 GHz. It has options for mapping, modulation analysis, standards support, pulse measurements, and frequency settling and displays real time spectrogram to minimize time spent on transient and interference hunting. It is ideal for maintenance, installation, value-conscious design and manufacturing and interference hunting.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
2 Port Digital Vector Network Analyzer Measures Signals up to 3.2 GHz

Vector Network Analyzer from Copper Mountain Technologies

The PLANAR 304/1 is a two port digital vector network analyzer that operates from 100 kHz to 3.2 GHz. The analyzer can compute a full range of S-Parameters (S11, S12, S21, S22) and has a dynamic range of 135 dB. It can be controlled from any windows PC via USB and Copper Mountains customized software. It can measure up to 200,001 points per sweep and can display up to 16 data traces in each channel window with up to 16 independent logical channels.
 
Download Datasheet | Product Details
 
Signal Generator
DC to 3/6 GHz RF Signal Generators

Signal Generator from RIGOL Technologies

The DSG3000 Series are RF signal generators that operate from DC to 6 GHz. They have an output amplitude range from -130 dBm to 13 dBm with a low phase noise of less than -110 dBc/Hz. The generators support standard AM, FM, Phase Modulation and Pulse Modulation. It has standard USB/LAN/GPIB remote control interfaces.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
Solid State Programmable Attenuator from 200 MHz to 6 GHz

RF Variable Attenuator from JFW Industries

The 50P-2014 from JFW Industries is a solid state programmable attenuator that operates from 200 MHz to 6 GHz. It can be programmed to an attenuation level from 0 to 95 dB in 1 dB steps. The attenuator has an insertion loss of 8 dB, switching speed of 1 mille second and can handle up to 20 dBm of power. It requires a 5 V DC supply and is available in a module with SMA – Female connectors.
 
Download Datasheet | Product Details
 
Fixed Attenuator
DC to 3 GHz Fixed Attenuator Series

Fixed Attenuator from Microwave Devices Inc.

The MA-50 is a series of fixed attenuators that operate from DC to 3 GHz. The series has an attenuation range from 1 to 40 dB with an accuracy of ±0.8 dB and a VSWR up to 1.30:1. The attenuators can handle up to 2 W of CW power with a peak power of 1000 W and are available with both 50 and 75 Ohms matches. The series is available with BNC, N type, SMA and TNC male and female connectors.
 
Download Datasheet | Product Details
 
OCXO
Low Phase Noise OCXO from 48 MHz to 125 MHz

OCXO from Morion, Inc.

The MV318 is a low phase noise OCXO that operates from 48 to 125 MHz. It has a low phase noise of less than -180 dB/Hz at a 100 kHz offset and high stability vs temperature. This OCXO requires a supply voltage of 12 V and is ideal for PLL, VSAT and frequency synthesizer applications.
 
Download Datasheet | Product Details
 
TCVCXO
Temperature Compensated VCXO’s from 30 MHz to 2000 MHz

TCVCXO from NEL Frequency Controls

The OK-XBFXXXX Series are temperature compensated, voltage controlled crystal oscillators (TCVCXO) that operate from 30 to 2000 MHz. These SMD oscillators provide excellent temperature stability with a duty cycle of 55%. They can provide CMOS, Sine-Wave, Differential PECL or LVDS outputs with very low phase noise and jitter. The TCVCXO are available in a small surface mount FR4 based packages.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
Low Phase Noise VCO for a 1 GHz Clock Source

Voltage Controlled Oscillator from Z-COMM

The ZRO1000A-LF from Z-COMM is a voltage controlled oscillator for a 1 GHz clock source. It has a low phase noise of -129 dBc/Hz at 10 kHz offset, can provide up to 9 dBm of power and is matched to 50 Ohms. The oscillator has a tuning voltage from 1.5 to 3.5 Vdc, tuning sensitivity of 2 MHz/V and require a supply of 8 V DC while drawing 30 mA of current. The ZRO1000A-LF is well suited for test instrumentation applications that require an extremely low phase noise clock source.
 
Download Datasheet | Product Details
 
Band Pass Filter
245 to 255 MHz Surface Mount Band Pass Filter

Band Pass Filter from Anatech Electronics

The AE250B11032 from Anatech Electronics is a Lumped component band pass filter that operates from 245 to 255 MHz. It has an attenuation of 40 dB at 220 MHz, an insertion loss of less than 5 dB and rejection of more than 20 dB. The filter can handle up to 100 mW of power and is available in a surface mount package.
 
Download Datasheet | Product Details
 
Low Pass Filter
40 MHz Low Pass Filter with low Insertion Loss

Low Pass Filter from Anatech Electronics

The AE40L8846 from Anatech Electronics is a low pass filter that operates up to 40 MHz. It has an insertion loss of less than 0.3 dB, a return loss of more than 15 dB and rejection of more than 40 dB at frequencies above 50 MHz. The filter can handle up to 25 Watts of power and is available in a module with SMB connectors. It measures 2.51 x 0.75 x 0.50 inches.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.