|
Top stories this week. View it in your browser
| New White Papers & Articles |
|
|
| Featured Products this Week |
|
|
|
|
|
|
| Programmable RF Over Fiber Modules from 0.5 to 4000 MHz |
RF Over Fiber Module
from RFOptic
|
| The RFoF-4.0GHz from RF Optic are Programmable RF Over Fiber Modules that operate from 0.5 to 4000 MHz. They are used to convert RF signals to optical signals to carry over long distances. The Tx unit using an optical transmitter converts RF to an Optical signal and the Rx unit converts it back to an RF signal. The two units are connected through the customer’s single-mode fiber. All units can be monitored and managed remotely with RFOptic’s unique SNMP/HTML capability. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Space Qualified VCXO from 0.256 to 52.5 MHz |
VCXO
from Rakon
|
| The RVX2213S from Rakon is a space grade VCXO that operates from 0.256 to 52.5 MHz. This VCXO has an extremely high pulling ability of ±375 ppm. It is manufactured in accordance with MIL-PRL-55310 Class 2, level S and is designed for space missions where it is resistant to the demanding environment, has a short lead-time and meets the radiation tolerance requirements. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Handheld Microwave Analyzer from 300 kHz to 50 GHz |
Antenna Analyzer
from Keysight Technologies
|
| The N9952B from Keysight Technologies is an all-in-one portable instrument that can be configured to function as a VNA, spectrum analyzer, power meter, or vector voltmeter, and supports more than 25 different measurement functions. It operates from 300 kHz to 50 GHz. The analyzer can capture elusive signals with 120 MHz gap-free, real-time bandwidth has software-defined measurement functions, and can make on-the-go, accurate spectrum analyzer measurements within a ± 0.2 dB range. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Wi-Fi 6 Front-End IC from 5150 to 5925 MHz |
Front End Module
from NXP Semiconductors
|
| The WLAN7102C from NXP Semiconductors is a Wi-Fi 6 Front-end IC that operates from 5150 to 5925 MHz. It consists of an integrated power amplifier, logarithmic power detector, low noise receiver amplifier (LNA), single pole double throw (SPDT) switch, coexistence filters for both transmit and receive channels, and RF decoupling capacitors for all VCC and control pins. It is matched to 50 Ohms and integrates harmonics and out-of-band filtering which minimizes layout area. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 480 Mbps Ultra-Wideband Technology SoC |
RF Transceiver
from Starix Technology
|
| The STX1001 from Starix Technology is a highly integrated UWB CMOS SoC with support for Band Group 1 (3.168 - 4.752 GHz) and Band Group 3 (6.336 -7.920 GHz). It has integrated Protocol Adaptation Layers, a Media Access Controller (MAC), a baseband processor, RF transceivers, and USB 2.0 and SDIO interfaces. The chip supports date rates from 53 to 480 Mbps (53.3, 80, 106.7, 160, 200, 320, 400, 480 Mbps) and has AES-128 hardware encryption. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Bluetooth 5.2 SoC with Built-in USB for BLE, Bluetooth Mesh, Thread and Zigbee |
Wireless SoC
from Nordic Semiconductor
|
| The nRF52820 from Nordic Semiconductor is a Bluetooth 5.2 System-on-Chip (SoC) offering USB and advanced wireless connectivity in a small package, for HID, smart home, commercial, and industrial applications. The 2.4 GHz multiprotocol radio provides up to 8 dBm output power and has a receiver sensitivity of -95 dBm. It supports all Bluetooth Low Energy features, including Direction Finding, high-throughput 2 Mbps, Long Range, and all Bluetooth 5.2 features. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| 60 W GaN Power Amplifier from 5.2 to 5.9 GHz |
RF Amplifier
from MACOM
|
| The MAPC-S1504 from MACOM is a Power Amplifier that operates from 5.2 to 5.9 GHz. It delivers a saturated CW/Pulsed output power of 60 W with a small signal gain of 16.7 dB and has an efficiency of up to 50.5%. The power amplifier is based on GaN on SiC HEMT D-mode technology. It requires a DC supply voltage of 50 V and consumes 13.3 A of current. It is ideal for use in military radio communications, RADAR, avionics, digital cellular infrastructure, RF energy, and test instrumentation applications. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| RFID Label with 3.9 m Read Range and On Metal Functionality |
RFID Tag
from Omni-ID, Ltd
|
| The IQ 300 M730 from Omni-ID is an RFID Label that operates from 866 to 868 MHz (EU) and 902 to 928 MHz (US). It has a read range of up to 3.9 m with a fixed reader and up to 2 m with a handheld reader. This RFID label uses the Impinj-M730 chip with an EPC memory of 128 bits and a unique TID memory of 48 bits. It is ideal for thermal barcode printers and portal applications. The label is based on the EPC Class 1 Gen2v2 radio protocol. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| L & S-Band Bidirectional Amplifier from 1 to 2.5 GHz |
RF Amplifier
from NuWaves Engineering
|
| The NW-BA-12B04A from NuWaves Engineering is a bi-directional amplifier that operates from 1 to 2.5 GHz. It is ideal for extending the communication range of half-duplex L or S-band transceivers with constant-envelope waveforms or near-constant-envelope waveforms. The amplifier generates 10 W of output power at the Tx port (5% EVM at 34 dBm) and provides over 13 dB of gain with a low noise figure in the Rx path. It is available in a module that measures 3 x 2 x 1.16 inches with SMA female connectors. |
|
Download Datasheet |
Product Details
|
|
|
|
| | About everything RF | | everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers, interviews and much more. |
|
| To unsubscribe please click here | [Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip] |
|
