1. everything RF
  2. RF Newsletters
more
PREV 12, Jan 2022 NEXT

New RF and Microwave Products this Week

12, Jan 2022 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 12, Jan 2022
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
RF Amplifier
Connectorized RF Amplifier from 0.01 to 6 GHz

RF Amplifier  from Teledyne Microwave Solutions

The A3CP6025 from Teledyne Microwave Solutions is an Amplifier that operates from 0.01 to 6 GHz. It provides a small signal gain of more than 20 dB, has a noise figure of less than 6.5 dB and a P1dB of up to 25 dBm. The amplifier draws less than 350 mA of current. It is available in a standard connectorized three-stage CougarPak™ package that measures 41.5 x 14.6 x 8.4 cm and has SMA connectors.
Download Datasheet | Product Details
RF Switch
Switch and Tune Chipset from 0.1 to 3 GHz for Cellular/IoT Applications

RF Switch  from AVX Corporation

The EC646 from KYOCERA AVX is a Switch and Tune Chipset that operates from 100 to 3000 MHz. It allows the RF front-end to cover global bands and seamlessly improve performance in a dynamically changing RF environment by employing active tuning. It can be used in a variety of applications including wireless devices, cell phones, and M2M products.
Download Datasheet | Product Details
Front End Module
Wi-Fi 6 Front-End Module from 5150 to 5850 MHz

Front End Module  from Qorvo

The QPF4532 from Qorvo is a Wi-Fi 6 (802.11ax) Front-End Module that operates from 5150 to 5850 MHz. It has an integrated power amplifier (PA), single pole two throw switch (SP2T), and bypassable low noise amplifier (LNA). The FEM delivers an output power of up to +25 dBm with a Tx gain of 31 dB and provides an Rx gain of 13.5 dB with a noise figure of 2 dB.
Download Datasheet | Product Details
RF Module
2.4/5 GHz Wi-Fi 6 + BLE 5.2 + 802.15.4 Triple-Radio Chipset

RF Module  from NXP Semiconductors

The IW612 from NXP Semiconductors is a 2.4/5 GHz Dual-Band Wi-Fi 6 + BLE 5.2 + 802.15.4 Triple-Radio single-chip solution. This highly integrated chipset lowers system cost and has a minimum external BOM while achieving efficient coexistence between all internal radios as well as external radios, such as LTE. This radio has an integrated power amplifier (PA), low noise amplifier (LNA) and Tx/Rx switch and supports UL/DL MU-MIMO and OFDMA features.
Download Datasheet | Product Details
RF Cable
110 GHz Test Cable for mmWave 5G, 6G, and Automotive Radar Applications

RF Cable  from Times Microwave Systems

The Clarity 110 from Times Microwave is a Rugged Test Cable that provides ultra-stable performance up to 110 GHz. It provides more than 100 dB of shielding and has a propagation velocity of 70%. This cable has phase stability of ±2°, amplitude stability of ±0.075 dB, and a VSWR of less than 1.45:1. It has a wide operating temperature range from -55 to 125°C. The cable is available with 1.0 mm (male/female) connectors.
Download Datasheet | Product Details
RF Cable Assembly
Strain-Relief Cable Assemblies from DC to 65 GHz

RF Cable Assembly  from SV Microwave

This Series of Strain Relief Cable Assemblies from SV Microwave operate from DC to 65 GHz. They feature a silicone rubber strain-relief boot that protects the cable termination area and enhances usage in applications that require precise measurements, allowing more flexibility and easy integration into test equipment.
Download Datasheet | Product Details
Sponsored by Mouser
Mouser
Low-profile, multi-band RF front-end (RFFE) module
Skyworks Solutions Inc. SKY68031-11 Multi-Band RF IoT Front-End Module supports LTE-M/NB-IoT transceiver platforms and integrates the entire RF front end necessary for an LTE multi-band radio operating in low-band and mid-band frequencies. Click here to learn more.
 
RF Inductor
High Q Square Air Core Inductors Series

RF Inductor  from Coilcraft

The 111SQ Series from Coilcraft are Square Air Core Inductors with an exceptionally high-Quality factor of up to 200 at 400 MHz. This series of inductors have an inductance from 27 to 47 uH and have an SRF of between 2.2 and 2.6 GHz. The inductors have solar-coated leads to ensure excellent solderability and have a flat top and bottom for easy placement via pick and place machines.
Download Datasheet | Product Details
Low Pass RF Filter
Miniature Harmonic Low Pass Filter from DC to 2500 MHz

Low Pass RF Filter  from NuWaves Engineering

The NuFilter 05LPLE-2500 is a low-cost Miniature Harmonic low-pass RF Filter designed to reduce harmonics at the output of transmitters operating at up through S-Band. This high-performance module can handle up to 50 Watts of input power, with a 0.5 dB of insertion loss in the passband frequency range from DC to 2500 MHz. It is ideal for military communications, avionics, wireless infrastructure, SDR''''''''''''''''s and Test and Measurement applications.
Download Datasheet | Product Details
RF Amplifier
1000 W Solid-State Power Amplifier from 1 to 2.5 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2082LC from Exodus Advanced Communication is a Solid-State Power Amplifier that operates from 1 to 2.5 GHz. It delivers a saturated output power of more than 1000 W with a power gain of over 60 dB. The amplifier has a Class A/AB linear design and uses high-power advanced devices that provide high efficiency with excellent reliability and ruggedness.
Download Datasheet | Product Details
RF Amplifier
1.25 W Power Amplifier from 18 to 40 GHz

RF Amplifier  from Mountain Microwave Technology

The MM-BPA-180400-40-31 from Mountain Microwave Technology is a Power Amplifier that operates from 18 to 40 GHz. It delivers a saturated output power of 31 dBm (~1.25 W) with a small signal gain of 40 dB. The amplifier has a noise figure below 5.5 dB and a VSWR of less than 2:1. It requires a DC supply of 12 V and consumes less than 2.2 A of current.
Download Datasheet | Product Details
RF Amplifier
750 W Solid State Amplifier System from 1 to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 750S1G6C from AR RF/Microwave Instrumentation is a Solid-State Amplifier System that operates from 1 to 6 GHz. This class A amplifier delivers a saturated output power of more than 750 W from 1 to 4.2 GHz and 500 W from 4.2 to 6 GHz. It is immune to input overdrive above 0 dBm (up to 13 dBm), power supply faults, over-temperature, and has protection against other failure conditions as well.
Download Datasheet | Product Details
RF & Microwave Isolator
2 W Coaxial Isolator 27 to 31 GHz

RF & Microwave Isolator  from JQL Electronics

The JIC27K0T31K0K0 from JQL Technologies is a Coaxial Isolator that operates from 27 to 31 GHz. It provides isolation of more than 19 dB and has an insertion loss of less than 0.7 dB. The isolator can handle a forward power of 2 W and reverse power of 1 W. It is available in a module that measures 12.7 x 12.7 x 16.0 mm with coaxial connectors.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
Vector Network Analyzer
2-Port Vector Network Analyzer from 10 MHz to 44 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The S5243 from Copper Mountain Technologies is a 2-port Vector Network Analyzer that operates from 10 MHz to 44 GHz. It has an excellent dynamic range of 130 dB, typ. (10 Hz IF BW) and a fast measurement speed of 17 µs. The VNA can be used to measure all four S parameters (S11, S21, S12, and S22) and has an output power that can be adjusted from -50 dBm to 0 dBm.
Download Datasheet | Product Details
Power Sensor
USB/LAN Thermal Power Sensor from DC to 50 GHz

Power Sensor  from Rohde & Schwarz

The NRP50T(N) from Rohde & Schwarz is a Thermal Power Sensor that operates from DC to 50 GHz. It has a power measurement range from 300 nW to 100 mW (–35 dBm to +20 dBm) with an acquisition sample rate of 20.833 kHz and measurement noise less than 25 nW. It has uncertainty for relative power measurements at less than 0.010 dB.
Download Datasheet | Product Details
RF Variable Attenuator
95 dB USB Controlled Programmable Attenuator from 200 to 8000 MHz

RF Variable Attenuator  from JFW Industries

The 50P-2111 from JFW Industries is a Bi-Directional, Solid-State Programmable Attenuator that operates from 200 to 8000 MHz. It has an attenuation range from 0 to 95 dB with a step size of 1 dB (1, 2, 4, 8, 16 and 32 dB step options available). The attenuator has an insertion loss of less than 7 dB and a typical switching speed of 0.7 µs.
Download Datasheet | Product Details
RF Variable Attenuator
95 dB Digital Step Attenuator from 50 MHz to 6 GHz

RF Variable Attenuator  from Ranatec

The RI 4410 from Ranatec is a 4-Bit Digital Step Attenuator that operates from 50 MHz to 6 GHz. It provides an attenuation of up to 95.25 dB with a step size of 0.25 dB. The attenuator can handle a CW input power of up to 28 dBm, has an insertion loss of less than 7.2 dB. It can be controlled via parallel or serial interfaces. Four units can be controlled via one serial bus.
Download Datasheet | Product Details
Termination
500 W RF Termination from DC to 10 GHz

Termination  from Weinschel Associates

The WA1481 from Weinschel Associates is a Termination that operates from DC to 10 GHz. It can handle up to 500 Watts of average power and 5 kW of peak power. This termination is matched to 50 ohms and has a VSWR of less than 1.7:1. It is designed to meet MIL-DTL-3933 environmental specifications. and measures 258.20 mm(L) x 138.60 mm(W) x 115.50 mm(H) with an N-Type or DIN 7/16 stainless steel M/F connector.
Download Datasheet | Product Details
Wireless SoC
Bluetooth (LE) 5.3 SoC for IoT and Industrial Applications

Wireless SoC  from Infineon Technologies

The CYW20829 from Infineon Technologies is a Bluetooth Low Energy SoC that complies with Bluetooth 5.3 specifications. With the right combination of low power and performance, AIROC™ CYW20829 is designed to support the entire spectrum of Bluetooth Low Energy use cases for home automation, sensors, lighting, Bluetooth® Mesh, remote controls and any other Bluetooth® LE-connected IoT applications.
Download Datasheet | Product Details
Wireless SoC
2.4/5 GHz Wi-Fi 6 SoCs for Home Networks

Wireless SoC  from MaxLinear, Inc

The WAV600 Series from MaxLinear are Wi-Fi 6 Certified SoCs that operate in the 2.4/5 GHz frequency bands. They deliver speeds of up to 4.8 Gbps in the 5 GHz band and 1.14 Gbps in the 2.4 GHz band. The chips offer up to four spatial streams in the 5 GHz spectrum with a channel width of up to 160 MHz. The SoCs are available in MRQFN packages that measure 15.00 x 16.00 x 0.85 mm.
Download Datasheet | Product Details
GNSS Module
Automotive Grade Dual-Band GNSS Module with cm-Level Accuracy

GNSS Module  from Quectel

The LG69T-AM from Quectel is an Automotive Grade GNSS Module that supports L1 and L5 bands. It uses advanced RTK algorithms to provide up to 10 positions per second with sub-10cm horizontal accuracy. The module has an autonomous acquisition sensitivity of -145 dBm, reacquisition sensitivity of -153 dBm, and tracking sensitivity of -160 dBm.
Download Datasheet | Product Details
RF Mixer
Triple Balanced MMIC Mixer from 1.5 to 13 GHz

RF Mixer  from Marki Microwave

The MT3D-0113LSM from Marki Microwave is a GaAs MMIC Triple Balanced GaAs Mixer with an RF-LO frequency range from 1.5 to 13 GHz and IF Frequency range of 800 to 8500 MHz. The mixer has a conversion loss of 7.5 dB and a noise figure of 7.5 dB. The mixer provides a LO-RF/LO-IF isolation of 43 dB and RF-IF isolation of 42 dB.
Download Datasheet | Product Details
RF Switch
Automotive-Grade DPDT Switch from 0.7 to 3.8 GHz

RF Switch  from Skyworks Solutions

The SKYA21037 from Skyworks Solutions is a DPDT Switch that operates from 0.7 to 3.8 GHz. This AEC-Q100 grade 2 qualified switch is built on state-of-the-art CMOS, silicon-on-insulator (SOI) technology. It has an insertion loss of less than 0.55 dB and provides more than 28 dB of isolation. It is available in a QFN package that measures 2 x 2 mm.
Download Datasheet | Product Details
RF Amplifier
Low-Current Low-Noise Amplifier from 0.1 to 3.8 GHz

RF Amplifier  from Guerrilla RF

The GRF2100W from Guerrilla RF is a Low Noise Amplifier that operates from 100 to 3800 MHz. It provides a gain of 16.5 dB with an evaluation board noise figure of less than 0.8 dB and has a P1dB of 10 dBm. This AEC-Q100 Grade 2 qualified LNA is fabricated using a GaAs pHEMT process and offers flexible bias voltage and current.
Download Datasheet | Product Details
RF Transistor
20 W GaN HEMT from 2 to 2.2 GHz

RF Transistor  from WAVEPIA

The WP282P10020MH from WAVEPIA is a GaN HEMT that operates from 2 to 2.2 GHz. It delivers a saturated output power of 20 W with a gain of 13.7 dB and has a drain efficiency of 50%. This 50-ohm transistor requires a DC supply of 28 V and consumes less than 1 A of current. It is available in a surface-mount package that measures 24.0 x 17.6 mm.
Download Datasheet | Product Details
Voltage Controlled Oscillator
4550 MHz Voltage Controlled Oscillator for SATCOM Systems

Voltage Controlled Oscillator  from Z-COMM

The CRO4550X2-LF from Z-Communications is a Voltage Controlled Oscillator with an output frequency of 4550 MHz. It delivers an output power of 3.5 dBm into a 50-ohm load with a phase noise of -110 dBc/Hz at 10 kHz offset. The oscillator utilizes a unique oscillator design to cover the operating frequency within a tuning window from 0.5-4.5 Vdc.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]